DOI QR코드

DOI QR Code

Development of Boost Chopper with Built New Renewable Energy in Grid-Connected Distributed Power System

승압 초퍼 기능이 내장된 새로운 태양광 발전용 파워컨디셔너의 개발

  • Received : 2014.11.05
  • Accepted : 2014.11.25
  • Published : 2014.12.01

Abstract

This paper is related to a new solar power conditioner for a built-in step-up chopper function. In the first step-up chopper proposed solar PV power conditioner for mutually connected in series with the input voltage of the bypass diodes are respectively connected to the positive terminal should install the mutual boosting chopper diode connected in series with the boost chopper switching element between the two power supply and at the same time the first and the second was connected to a second diode and a resonance inductor and a snubber capacitor in series with each other. And the common connection point between the bypass diode and the step-up chopper and the step-up chopper diode common connection point of the switching elements of the input voltage was set to the boost inductor for storing energy. In addition, between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point of the first auxiliary diode and the second common connection point of the auxiliary diode was provided, the resonance capacitor. Between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point and the common connection point of the resonance inductor snubber capacitor and connecting the third secondary diode, between two power supply lines is characterized by configuring the DC link capacitor bus lines in parallel. Therefore, it is possible to suppress the switching loss through, DC link bus lines, as well as there could seek miniaturization and weight reduction of the power conditioner itself by using a common capacitor of the non-polar non-polar electrolytic capacitor having a capacitor, the service life of the circuit can be extended and it is possible to greatly reduce the loss can be greatly improve the reliability of the product and the operation of the product itself.

Keywords

References

  1. Solar Energy Association [eds.], "Design and Construction revised second edition of the power generation system of solar power system", Ohmsha, May 2001
  2. Qun zhao, fengeng Tao, Fred C. Lee Peng Xu and Jia We, "A Simple and Effective Method to Alleviate the Rectifier Reverse-Recoverry Problem in Continuous-Current-Mode Boost Converters", IEEE Transactions on Power Electronics, Vol.16, No5, Sep.2001, pp649-658 https://doi.org/10.1109/63.949497
  3. K. Mark Smith and Keyue Ma Smedley, "A Comparison of Voltage-Mode Soft Switching Methods for PWM Converter", IEEE Transactions on Pawer Electronics, Vol.12, No.12, March. 1997,pp376-386 https://doi.org/10.1109/63.558774
  4. Marn-Go kim and Seung-Ho Baek, "High-Power-Factor Boost Rectifier with a Passive Energy Recovery Snubber", Proceeding og ICPE, Seoul, 1998, pp668-676
  5. Akifusa Hirokazu, original Kenji, Funato Hiroto, Kenzo Kamiyama: "Study on power loss of zero-voltage switching high efficiency rectifier circuit", the Institute of Electrical Engineers Study Group document, June SPC99-69,2000, pp109-113
  6. Chihchiang Hua, Jongrong Lin and Chihming Shen, "Implementation of a DSP-Controlled Photovoltaics System with Peak Pwer Tracking", IEEE Transactions on Industrial Electronics, Vol.45, No1, feb.1998, pp99-107 https://doi.org/10.1109/41.661310
  7. Yeong-Chau Kao tsorng-Juu Liang and Jiann-fun Chen, "Novel Maximum-Power-Point-Tracking Controller for Photovoltaic Energy Conversion System", IEEE Transactions on Industrial Electronics, Vol.48, No3,Jn.2001, pp.594-601 https://doi.org/10.1109/41.925586