DOI QR코드

DOI QR Code

Development of Current Limiting COS Fuse Link with Improved Overcurrent and Protection Coordination performance

과전류 차단과 보호협조 성능이 향상된 한류형 COS 퓨즈링크 개발

  • Received : 2019.12.06
  • Accepted : 2020.03.06
  • Published : 2020.03.31

Abstract

A Cut Out Switch (COS) is used for line protection and pole transformer protection in power systems. The COS used to protect the pole transformer is installed on the power side of the pole transformer to protect the electric equipment from fault currents. The COS is composed largely of a body and a fuse holder, and when the fault current is energized, the element of the fuse link in the fuse holder is melted to block the fault current. The arc generated when the COS fuse link is blown causes fire and noise, causing discomfort to residents in the surrounding area, and the arc flame can cause secondary damage to the peripheral device. In this study, a current-limiting COS fuse with improved overcurrent blocking performance rather than explosion type was developed to solve the arc and noise problems during COS operation. The overcurrent breaking performance of the current-limiting COS improves the reliability by developing a striker and COS fuse bracket. In addition, this study aimed to verify the performance of the developed current-limiting COS fuse through a test at an authorized institution.

컷아웃스위치(COS: Cut Out Switch 이하 COS)는 전력계통에서 수용가로 전력을 송배전하기 위해 사용되는 변압기의 입력단에 설치되어 사고전류로부터 변압기를 보호하기 위해 설치되는 보호장치이다. COS는 크게 퓨즈링크와 COS몸체 및 접속부로 구성되어 사고전류시 퓨즈링크의 엘리먼트가 용단되어 사고전류를 차단하는 역할을 한다. COS 퓨즈링크가 용단되어 발생하는 강력한 아크가 화염과 소음을 유발시켜 주변지역 거주자에게 불쾌감 및 공포감을 주며, 아크화염으로 인하여 주변기기의 2차 피해를 유발시킬 수 있다. 본 논문에서는 COS 동작 시 발생되는 아크와 소음 및 보호협조의 문제점을 해결하기 위해 폭발형이 아닌 한류형 COS 퓨즈를 개발하였다. 또한 과전류 차단 기능이 없는 한류형 퓨즈의 단점을 개선하기 위해 퓨즈 엘리멘트, 스트라이커와 COS 퓨즈금구 개발을 통하여 과전류 차단성능의 신뢰성을 향상시켰다. COS의 동작 특성 향상은 퓨즈 엘리멘트의 최적 형상 도출, 스트라이커의 원활한 동작을 위한 동작선의 재질과 두께 및 저항 산정, 그리고 스트라이커와 연계된 하부금구류의 구조 개선을 통하여 수행하였다. 본 연구에서 개발한 COS 퓨즈링크는 공인기관의 시험을 통하여 차단성능과 보호협조 성능을 검증하였다. 시험은 본 연구의 한류형 COS와 기존의 폭발형 비한류형 COS의 비교 시험으로 수행하였다.

Keywords

References

  1. KEPCO Development business headquarters, "Glossary of Technical Terms for Transmission and Distribution", Korea Electric Power Corporation, pp. 448, Feb. 2013
  2. Korea Electric Power Corporation, "Cut Out Switch for Extra-high Tension", KEPCO Standard Specification, vol.3, ES-5920-0002, Apr. 2008
  3. H.Y. Song, K.M. Ju,, D.H. Lee, N.K. Kang, N.H. Jung, "An Experimental Study on the Propagation Characteristics and Reduction of Impulse Noises from a High Voltage COS Fuse", The Korean Society for Noise and Vibration Engineering, Proceeding of Autumn Conference, pp. 71-74, 2005
  4. P.S. Shim,"A Study on the Cut-out Switch for the Protection of Transformer in Power Utility System", Hoseo University Department of Safety Engineering PhD Thesis, pp. 84-85, Jun, 2004
  5. Y-H Kim, "A Study on the melting Characteristics of Fuse Element by Repeating Overcurrent", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol. 22, No. 2, pp. 120-126, Feb. 2010. https://doi.org/10.5207/JIEIE.2008.22.2.120
  6. J.K. Song, H.Y. Kim, "Study of Deterioration Improvement of Power Fuse", Journal of the Korea Academia-Industrial cooperation Society, Vol. 15, No. 6, pp. 3827-3831, 2014. https://doi.org/10.5762/KAIS.2014.15.6.3827