• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.117-125
• /
• 2016

Purpose: This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). Materials and Methods: Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. Results: Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. Conclusion: In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns.

• The korean journal of orthodontics
• /
• v.51 no.1
• /
• pp.32-42
• /
• 2021

Objective: To investigate the three-dimensional forces created by clear aligners on mandibular teeth during differential activation with en-masse retraction and/or intrusion in vitro. Methods: Six sets of clear aligners were designed for differential en-masse retraction and/or intrusion procedures in a first premolar extraction model. Group A0 was a control group with no activation. Groups A1-5 underwent different degrees of retractions and/or intrusions. Each group consisted of 10 aligners. Aligner forces were measured on a multi-axis force/torque transducer measurement system in real-time. Results: In the en-masse retraction groups (A1 and A2), lingual and extrusive forces were observed on the incisors; the canines mainly received distal forces; intrusive forces were seen on the second premolars; and the molars received mesial forces. In the en-masse retraction and intrusion groups (A3, A4, and A5), incisors also received lingual and extrusive forces; canines received distal and intrusive forces; mesial and extrusive forces were seen on the second premolars; and the second molars received distal and intrusive forces. The vertical forces on the incisors did not differ significantly among groups A1, A3, and A5. However, the vertical forces on the second premolars reversed from intrusion in group A1 to extrusion in groups A3 and A5. Conclusions: With clear aligners, the "bowing effect" is seen during en-masse anterior teeth retraction and can be partially relieved by performing en-masse retraction accompanied by anterior teeth intrusion. Vertical control of incisors remained unsolved during en-masse retraction, even when intrusive activation was added to the anterior teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.4
• /
• pp.368-376
• /
• 2020

The primary maxillary second molars usually have three roots. However, an additional root located mesiopalatally is occasionally observed. This study aimed to determine the relationship between a mesiopalatal root of primary maxillary second molars and an abnormal eruption pattern of maxillary second premolars. The study was performed on cone beam computed tomography images taken from 916 children who visited the Dental Hospital of Kyung Hee University from 2010 to 2018. 744 serial cross-sectional cone beam computed tomography images were evaluated. The overall incidence of the mesiopalatal root of primary maxillary second molars was 3.2% (n = 24) and the abnormal eruption pattern of maxillary second premolars was 19.2% (n = 143). Especially, patients with the mesiopalatal root of primary maxillary second molars were significantly more likely to have the abnormal eruption pattern on maxillary second premolars (p = 0.000). The odds of the abnormal eruption pattern of maxillary second premolars with the mesiopalatal root of primary maxillary second molars was about 13 times higher than those without. The eruption pattern of the permanent successor should be carefully observed and treated if the mesiopalatal root of primary maxillary second molar is existent.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2016

The developmental age of permanent teeth was evaluated in children and adolescents according to age and gender using the Nolla Method. A retrospective study was performed on panoramic radiographs of 1,200 subjects aged 4-15 years, including 50 children for each age/gender group. Three well-trained examiners estimated the developmental stage of upper and lower permanent teeth using the Nolla Method. The inter-examiner reliability was excellent (intra-class correlation coefficient value = 0.973). The mean developmental age was calculated. In boys, Nolla stage 6, indicated by crown completion, was seen in the central incisor, lateral incisor, canine, first premolar, second premolar, first molar, and second molar at 5.4, 6.4, 6.7, 7.5, 7.8, 4.6, and 8.1 years, respectively, in the maxilla and at 4.8, 5.1, 6.0, 6.5, 7.2, 4.5, and 8.0 years, respectively, in the mandible. In girls, Nolla stage 6 was seen at 5.3, 6.0, 6.3, 7.3, 7.7, 4.8, and 8.1 years, respectively, in the maxilla and at 4.8, 5.1, 5.9, 6.5, 7.2, 5.0, and 7.9 years, respectively, in the mandible. In this study, the developmental age of permanent teeth was evaluated in Korean children and adolescents who visited Yonsei University Dental Hospital. This study may be helpful in diagnosis and treatment planning in the clinic.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.259-271
• /
• 1992

This study was designed to investigate the criteria of the perfect smile that was necessary to improve the esthetic problem in oral and maxillo-facial region and treating the anterior tooth region. The author took the facial straight photograph of 240 university students(male : 129, female : 111) in a resting and a smiling position, measured and analized the lip pattern and the relation between the lip and the teeth when they were smiling. Besides, 10 members of committee for appraisal (dentist : 5 persons, professor of the college of fine arts : 5 persons) estimated the smiling pattern. After that the author have compared and analyzed the obtained results. The results obtained were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 42.92% , straight was 45.00% and curved upward was 12.08%. The group in which the upper lip curved upward was the most esthetic. 2. In the relation between the upper lip and the teeth, high smile was 29.17%, average smile was 55.83% and low smile was 15.00%. The group of average smile was the most esthetic. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of paralled was 60.42%, the group of straight was 34.17% and the group of reverse was 5.41%. The group of parallel was the most esthetic. 4. In the relationship between maxillary anterior incisor and lower lip, the group of the maxillary anterior incisor were slightly covered by the lower lip was 10.42%, the group of the maxillary anterior teeth touched to the lower lip was 35.83%, and the no-touching was 53.75%. The group of the maxillary anterior teeth touched to the lower lip was the most esthetic. 5. In the teeth displayed in a smile, displayed to the canine was 0.84%, displayed to the first premolar was 19.17%, displayed to the second premolar was 57.92%, displayed to the first molar was 20.00% and displayed to the second molar was 2.08%. The group of displayed to the first molar was the most esthetic. 6. At smiles, the width of the mouth corner was 0.46 times of the full face width, 0.95 times of the interpupillary distance, and 1.23 times of the resting position. 7. At smiles, the lengh of the upper lip was 0.71 times and lower lip was 0.93 times of the length in the resting position.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.105-111
• /
• 1996

Most of orthodontic cases are treated with extraction of certain teeth, which influence the pre-eruptive movement of the lower third molar The purpose of this study was to evaluate the positional change of lower third molar following orthodontic treatment. Pre- and post-treatment pantomograms of 163 orthodontic patients (77 nonextraction group, 78 first premolar- extraction group, 8 second molar- extraction group) were analyzed in terms of the mesiodistal and buccolingual angles of lower third molar. The results were as follows. 1. The change of the mesiodistal angle of lower third molar by orthodontic treatment was significant in second molar-extraction group. 2. The mesiodistal angle of lower third molar in pre-treatment was significantly correlated to the mesiodistal angle in post-treatment and/or the change of the mesiodistal angle by treatment. 3. The change of the buccolingual angle of lower third molar by orthodontic treatment was significant in non -extraction group or first premolar-extrction group. 4. The change of the buccolingual angle of lower third molar by treatment was significantly correlated to the mesiodistal angle in post-treatment, the change of the mesiodistal angle by treatment, the buccolingual angle in pre-treatment or the buccolingual angle in post-treatment.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.535-546
• /
• 1996

The purpose of this study was to classify mandibular dental arch forms based on Raberin's method, and to compare Raberin's arch forms with that of the Korean's, and to designate arch form of bracket level according to distance between cusp tip and buccal surface of bracket level. The sample consisted of 159 mandibular dental casts showing normal occlusion which was taken from 62 males and 97 females of the Korean, aging from 13 to 25 years. The model was taken by X-ray. The landmarks were cusp points which expressed the mandibular dental arch line of cusp tips and buccal points which were measured from cusp tips to buccal surfaces of bracket level. The landmarks on the film were digitized, and measurements and statistics were performed. The results were as follows; 1. The models were classified as type 1, type 2, type 3, type 4 and type 5 by the author, and polynomial functions of the six degree and R-square values were calculated using statistical method, and each calculated equations explained each group with the least R-square value of 0.97, and each arch forms' were plotted. 2. The distribution of type 1 was $17.6\%$, type 2 $20.8\%$, type 3 $20.8\%$, type 4 $16.3\%$ and type 5 $24.5\%$. 3. The Korean arch form was characterized by larger width, smaller height compared to the French arch form. 4. The designated arch form of bracket level, viz the distance between cusp point and buccal point was calculated. The distance between cusp point and buccal point of incisor was 1mm, canine 1.9mm, first premolar 2.5mm, second premolar 2.6mm, first molar 2.7mm and second molar 2.7mm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.308-329
• /
• 1997

A lot of the research paper was reported about the result of influence of IMC (Intra-mobile connector) in the IMZ implant placed solely in the alveolar bone, but reports about the effect of IMC on functional load at state of connecting with natural teeth ere rare. The major propose of this study was find the mechanical character of IMC itself by using the finite element analysis program after simulated variance of condition connected with the natural teeth and implant on funcional load. When first and second premolar was lost, IMZ implant was placed with a diameter of 3.3mm and a length of 13mm with IMC in second premolar area. Rigid connection was done and the non-figid connention was located on the female part of the canine abutment and the implant respectively and then both the infraocclusion of $30{\mu}m$ and the non-infraocclusion under the load of 40kg applied to the portion of the natural teeth, the pontic and the implant. The displacement and the stress of it was estimated and analyzed IMC itself of the rigid connection and the non-rigid connection was grouped. The following result were obtained. 1. In all groups, the displacement of Y-axis was greater than that of X-axis and the aspect of displacement showed that IMC was displaced downward and to the center. 2. There was no differences in the displacement of IMC regardless of the connection type. 3. In the displacement of IMC, I 4 was the least, I 1 and I 3 are similar and I 2 was the greatest. 4. There was no differences in the peak value of maximal stress of IMC regardless of the connection type. 5. In the peak value of maximal stress of IMC, I 4 was the least, I 1 and I 3 were similar, and I 2 was the largest.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.8-19
• /
• 2009

The purpose of this study was to investigate the effects of four restorative materials under various occlusal loading conditions on the stress distribution at the CEJ of buccal. palatal surface and central groove of occlusal surface of endodontically treated maxillary second premolar, using a 3D finte element analysis. A 3D finite element model of human maxillary second premolar was endodontically treated. After endodontic treatment, access cavity was filled with Amalgam, resin, ceramic or gold of different mechanical properties. A static 500N forces were applied at the buccal (Load-1) and palatal cusp (Load-2) and a static 170N forces were applied at the mesial marginal ridge and palatal cusp simultaneously as centric occlusion (Load-3). Under 3-type Loading condition, the value of tensile stress was analyzed after 4-type restoration at the CEJ of buccal and palatal surface and central groove of occlusal surface Excessive high tensile stresses were observed along the palatal CEJ in Load-1 case and buccal CEJ in Load-2 in all of the restorations. There was no difference in magnitude of stress in relation to the type of restorations. Heavy tensile stress concentrations were observed around the loading point and along the central groove of occlusal surface in all of the restorations. There was slight difference in magnitude of stress between different types of restorations. High tensile stress concentrations around the loading points were observed and there was no difference in magnitude of stress between different types of restorations in Load-3.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.193-200
• /
• 2008

Statement of problem: There have been a few studies about unsplinted implant retainted maxillary overdenture. Purpose: The purpose of this study was to examine the effect of different position of implant for 2 implants-retained maxillary overdenture. Materials and methods: Three-dimensional finite element models were used to reproduce an edentulous human maxilla with an implant-retained overdenture. Two implants in the canine tooth positions on both side and in the second premolar tooth positions on both side models were examined. Axial loads of 100 N were applied to the occlusal surface at the right first molar tooth positions. Maximum stress at the implant-bone interface and stress at the cortical bone surface just under the loading point were observed. Results and conclusion: Within the limits of this study, maximum stresses were concentrated around implant of canine position at loading side. The second premolar area was thought to be more favorable to distribution of stress on mucosa, alveolar bone and implants than canine area for maxillary overdenture.