A STUDY OF MANDIBULAR DENTAL ARCH FORM OF THE KOREAN WITH NORMAL OCCLUSION

한국인 정상교합자의 하악치열궁 형태에 관한 연구

  • Nam, Jong-Hyun (Department of Orthodontics, College of Dentistry, Kyung Hee University) ;
  • Lee, Ki-Soo (Department of Orthodontics, College of Dentistry, Kyung Hee University)
  • 남종현 (경희대학교 치과대학 교정학 교실) ;
  • 이기수 (경희대학교 치과대학 교정학 교실)
  • Published : 1996.10.01

Abstract

The purpose of this study was to classify mandibular dental arch forms based on Raberin's method, and to compare Raberin's arch forms with that of the Korean's, and to designate arch form of bracket level according to distance between cusp tip and buccal surface of bracket level. The sample consisted of 159 mandibular dental casts showing normal occlusion which was taken from 62 males and 97 females of the Korean, aging from 13 to 25 years. The model was taken by X-ray. The landmarks were cusp points which expressed the mandibular dental arch line of cusp tips and buccal points which were measured from cusp tips to buccal surfaces of bracket level. The landmarks on the film were digitized, and measurements and statistics were performed. The results were as follows; 1. The models were classified as type 1, type 2, type 3, type 4 and type 5 by the author, and polynomial functions of the six degree and R-square values were calculated using statistical method, and each calculated equations explained each group with the least R-square value of 0.97, and each arch forms' were plotted. 2. The distribution of type 1 was $17.6\%$, type 2 $20.8\%$, type 3 $20.8\%$, type 4 $16.3\%$ and type 5 $24.5\%$. 3. The Korean arch form was characterized by larger width, smaller height compared to the French arch form. 4. The designated arch form of bracket level, viz the distance between cusp point and buccal point was calculated. The distance between cusp point and buccal point of incisor was 1mm, canine 1.9mm, first premolar 2.5mm, second premolar 2.6mm, first molar 2.7mm and second molar 2.7mm.

이 연구는 한국인 하악치열궁 형태를 분류하고, 교두정에서 브라켓 높이의 협면점까지 거리를 계측하여 이상적인 호선 제작에 도움을 얻기위하여 시행되였다. 13세에서 25세사이의 정상적인 교합자 159명의 석고모형을 대상으로 순측 및 협측 교두정을 지나는 하악치열궁선에서 견치간, 제1대구치간 및 제2대구치간 폭경과 이들의 고경을 계측한 다음, 유클리안 거리를 이용한 평균군집분석을 시행하여 치열궁형태를 5가지로 분류하고, 각각의 6차 다항식과 결정계수를 구하였으며, 교두정에서 브라켓 높이의 협면점까지의 거리를 계측하고 비교검토하여 다음의 결과를 얻었다. 1. 5가지 하악치열궁선을 실제의 크기로 작도하고, 1형, 2형, 3형, 4형 및 5형으로 명명하였다. 2. 각각의 치 열궁선은 하악 제2대구치간 폭경으로 표현되는 6차다항식과 결정 계수를 산출하였으며 이 식으로 $97\%$이상 설명이 가능하였다. 3. 각 치열궁선의 분포는 5형이 $24.5\%$로 가장 많았으며, 2형과 3형이 각각 $20.8\%$ 1형은 $17.6\%$, 4형은 $16.3\%$의 분포를 보였다. 4. 한국인의 하악치열궁선은 프랑스인에 비하여 폭경이 넓고 고경이 낮은 특성을 보였다. 5. 교두정에서 브라켓높이의 협면점까지의 거리는 절치가 1.0, 견치는 1.9, 제1소구치는 2.6, 제1 및 제2 대구치는 2.7 이였다.

Keywords