• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.683-688
• /
• 2012

Driver's feeling is variously affected by lots of components such as engine, frame, wheels, and seats during the operation of automobiles. The main objective of this research is to identify the correlation between subjective evaluation and vibration metrics that was set by ISO to investigate development of the car vibration quality index using multiple linear regressions (MLR). A previous research related with automotive vibration quality used the method of calculating acceleration values of the point of a seat, a seat back, foot as RMS for objective evaluation. The automotive comfort is determined by RMS values. In comparison with the previous research, this study includes not only the vibration metrics, but also subjective values by jury evaluation. By indentifying the correlation between subjective evaluation and vibration metrics, the automotive vibration quality index is developed through MLR. Based on the results of this study, the proposed the automotive vibration quality index which developed through MLR will be helpful to obtain objective and reliable automotive comfort values.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.359-364
• /
• 2012

Purpose: This study was conducted to analyze the vibration absorption effect for the agricultural product transportation-trailer equipped with vibration absorbable connecting hitch, leaf spring suspension, and shock absorber simultaneously (HLS), comparing with the trailer equipped with vibration absorbable connecting hitch only(H), trailer equipped with connecting hitch and leaf spring suspension (HL), and existing trailer with no vibration absorption device (E). Methods: Vertical accelerations were measured at driver seat and front, middle, rear parts of trailer bottom with no load for 4 types of transportation-trailer, and analyzed using FFT analyzer. Results: The magnitude of average vibration accelerations occurred up to 20 Hz, at this low frequencies the severe damage for agricultural products could be represented, was lower (maximum 6 times) for HLS trailer compared with H trailer. And vibration absorption effect for HLS trailer was also higher up to 40-80 Hz and 80-100 Hz, but the difference was less. At driver seat, the vibration absorption effect was high severely for HL and HLS trailer, and the magnitude of vibration acceleration was showed less difference in comparing at trailer bottom. Conclusions: From the test results, it could be recommended that the agricultural products transportation trailer should be equipped with vibration absorption device of HLS.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.122-132
• /
• 2000

A simplified modeling approach of forced vibration for occupied car seats was demonstrated by using a mathematical model presented in 'Free Vibration of Car seat and Mannequin System' nonlinear and linear equations of motions were rederived for forced vibration and the transfer function was used to calculate the frequency response function. The experimental apparatus were set up and hydraulic shaker was used to obtain the system responses. Through the tests mannequin's head had a lot of problems and the responses with a head and without a head were measured. To explore the effects of linear dampings and friction moments at the joints linear analyses were performed. New sets of linear spring and damping coefficients and torsional dampings at the joints were calculated through parameter study to match up with experimental results. Good agreement between experimental and simulation frequency response estimates were obtained both in terms of locations of resonances and system deflection shapes at resonance indicating that this is a feasible method of modeling seated occupants.

• 재활복지공학회논문지
• /
• 제8권1호
• /
• pp.1-7
• /
• 2014

본 연구에서는 기존의 시/청각 방식의 운전정보 전달체계의 한계를 극복하고 더불어 교통약자들의 운전 수행에 도움이 되는 자동차용 햅틱시트 기술을 개발하고자 하였다. 이를 위해 동전형 모터 30개를 사용한 진동자극용 시트커버형 시제품과 모터드라이버모듈을 제작하였고 촉각이상이 없는 젊은 남녀 10명을 대상으로 6자유도 모션베이스 상에 구축된 가상운전 시뮬레이터를 사용하여 가상운전상황에서의 시트진동자극에 대한 실험을 진행하였다. 모터의 동작전압(1.5V, 2.5V, 3.5V)에 따라 세기가 가변되는 30개소의 진동자극의 위치별 인지율을 측정하여 분석하였다. 피험자들은 2.5V,3.5V로 동작하는 30개소의 모터 진동자극을 모두 인지하였고 최저작동전압인 1.5V에서도 일정수준 이상의 인지율을 보여주는 결과를 얻었으며 이 결과는 차량 내에서의 시트를 통한 진동자극의 운전정보 유용성을 보여주는 것으로 사료된다.

• 한국융합학회논문지
• /
• 제10권6호
• /
• pp.165-170
• /
• 2019

본 연구는 스쿠터 시트에 대해 구조해석과 진동해석을 하였다. 스쿠터는 주변에서 쉽게 접할 수 있고 거리에서 손쉽게 볼 수 있다. 이에 따라 본 연구는 스쿠터의 종류 중 비본A, 줄리오 B, 시티에이스 C, 3가지 종류를 비교하여 사람의 무게와 비슷한 힘을 스쿠터 시트에 가하고 구조해석을 통해 어떤 시트가 가장 변형이 많이 오는 가를 변형량을 서로 비교하고 사람에게 편안함을 줄 수 있는지 주행 중 진동을 흡수하여 탑승자에게 불편함을 주지 않을 지를 알아보았다. 구조해석 결과로서 모델 C가 전변형량이 가장 컸다. 그리고 모델 B가 변형이 많이 되면서 앉기 편하도록 변화되는 것을 알 수 있었다. 이 연구를 통해 어느 시트가 가장 편안하고 내구성이 강할지 확인해 볼 수 있었다. 본 연구결과를 토대로 얻은 스쿠터 시트 모델의 내구성 해석 결과 데이터를 활용함으로서 실생활에서의 기계나 구조물에 융합하여 그 미적 감각을 나타낼 수 있다.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.261-266
• /
• 2003

이 논문에서는 반능동 진동 흡수기를 통합 시트/섀시 현가 장치에 확대, 적용하여 그 성능을 조사하였다. 통함 현가시스템의 성능분석을 위해 집중 인체질량과 함께 실험적으로 입증된 한 비선형 시트 쿠션 모델을 도입하였다. 또한 3 자유도 시트/섀시 현가시스템의 효과적인 진동제어를 위해 리아푸노브 바이스테이트 제어법칙을 사용하였다. 시뮬레이션결과 반능동 통합 현가장치는 시트 쿠션 모델과 관계없이 운전자의 승차감과 관련 있는 시트의 절대가속도 크기와 시트쿠션의 시트 트랙에 대한 상대변위를 상당히 감소시킬 수 있음을 알 수 있었다. 그러나, 주로 사용되어온 선형 쿠션 모델을 사용한 경우보다 비선형쿠션 모델을 사용한 경우의 제진성능이 약간 저조함을 알 수 있었다. 따라서, 자동차 시트 설계시 성능분석을 위해서는 실제의(비선형의) 시트 쿠션 특성을 적용해야 함을 알 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.680-683
• /
• 2005

The wing component model for flutter analysis consisting of stiffness, mass, and aerodynamic model has been constructed based on the full airframe finite element model for 4-seat canard-type small aircraft. A study on wing flutter characteristics has been investigated based on the wing component model constructed using PK method in MSC/NASTRAN for flutter analysis. In addition, wing flutter mechanism for the aircraft under consideration has been analyzed based on the results of normal mode and flutter analysis.

• 소음진동
• /
• 제10권2호
• /
• pp.269-279
• /
• 2000

This paper deals with the development of biomechanical model on a seat with backrest support in the vertical direction. Four kinds of biomechanical models are discussed to depict human motion. One DOF model mainly describes z-axis motion of hip, two and three DOF models describe z-axis of hip and head, and while nine DOF model suggested in this study represents more motion than the otehr model. Three kinds of experiments were executed to validate these models. The first one was to measure the acceleration of the floor and hip surface in z-axis, the back surface in x-axis, and the head in z-axis under exciter. From this measurement, the transmissiblities of each subject were obtained. The second one was the measurement of the joint position by the device having pointer and the measurement of contact position between the human body and the seat by body pressure distribution. The third one was the measurement of the seat and back cushion by dummy. The biomechanical model parameters were obtained by matching the simulated to the experimental transmissiblities at the hip, back, and head.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.675-679
• /
• 2006

Today, the interior noise perceived by the occupants is an important factor in the design of automotive interior assemblies. Buzz, Squeak and Rattle Noises in a Seats are one of the major concerns mentioned above. In this study, the terms 'Buzz, squeak and rattle' were defined as the noise originating from structural vibrations in an assembly. And, the BSR noise of vehicle seat was investigated and the improvement of BSR noise level was confirmed though the structural treatment based on the structural analysis results from the modal and sound intensity of seat.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.518-523
• /
• 1995

To improve the set comfort of commercial vehicles in various road conditions, it is necessary to design a seat shock absorber which can avoid the vibration zone imposing the discomfort feeling and fatigue on drivers. Through the vibration and dynamic analysis, a shock absorber that has 4 steps of damping ability is developed. Dynamic characteristics analysis of the seat damper is performed considering each valve and oil path for the design purpose.