Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

Convergence Study on Durability Analysis of Scooter Seat

스쿠터 시트의 내구성 해석에 관한 융합 연구

  • Oh, Bum-Suk (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 오범석 (공주대학교 기계자동차공학부) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2019.04.11
  • Accepted : 2019.06.20
  • Published : 2019.06.28
Download PDF
⟨ Previous Next ⟩

Abstract

This study carried out the structural analysis and vibration analysis on scooter seat. By comparing with three kinds of B-bone A, Julio B, and City Ace C, the load was applied to scooter seat as much as a weight of person. Through structural analysis, this study examined which seat is most deformed by comparing the deformation each other or affords passengers most convenience and does not afford passengers the inconvenience by absorbing the vibration during driving. Model C has the most total deformation at the structural analysis result and Model B is seen to be changed to be convenient to sit the deformation as it deforms largely. Through this study, which seat is most convenient and becomes strong on durability can be confirmed. As the durability analysis result data of scooter seat model obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

본 연구는 스쿠터 시트에 대해 구조해석과 진동해석을 하였다. 스쿠터는 주변에서 쉽게 접할 수 있고 거리에서 손쉽게 볼 수 있다. 이에 따라 본 연구는 스쿠터의 종류 중 비본A, 줄리오 B, 시티에이스 C, 3가지 종류를 비교하여 사람의 무게와 비슷한 힘을 스쿠터 시트에 가하고 구조해석을 통해 어떤 시트가 가장 변형이 많이 오는 가를 변형량을 서로 비교하고 사람에게 편안함을 줄 수 있는지 주행 중 진동을 흡수하여 탑승자에게 불편함을 주지 않을 지를 알아보았다. 구조해석 결과로서 모델 C가 전변형량이 가장 컸다. 그리고 모델 B가 변형이 많이 되면서 앉기 편하도록 변화되는 것을 알 수 있었다. 이 연구를 통해 어느 시트가 가장 편안하고 내구성이 강할지 확인해 볼 수 있었다. 본 연구결과를 토대로 얻은 스쿠터 시트 모델의 내구성 해석 결과 데이터를 활용함으로서 실생활에서의 기계나 구조물에 융합하여 그 미적 감각을 나타낼 수 있다.

Keywords

OHHGBW_2019_v10n6_165_f0001.png 이미지

Fig. 1. Study models

OHHGBW_2019_v10n6_165_f0002.png 이미지

Fig. 2. Constraint conditions of model

OHHGBW_2019_v10n6_165_f0003.png 이미지

Fig. 3. Structural analysis of A

OHHGBW_2019_v10n6_165_f0004.png 이미지

Fig. 4. Structural analysis of B

OHHGBW_2019_v10n6_165_f0005.png 이미지

Fig. 5. Structural analysis of C

Table 1. Total Deformation Equivalent, Elastic Strain and Equivalent Stress at models

OHHGBW_2019_v10n6_165_t0001.png 이미지

References

  1. J. U. Cho. (2015). Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type. Journal of the Korea Convergence Society, 6(1), 57-63. https://doi.org/10.15207/JKCS.2015.6.1.057
  2. J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Structural Analysis due to the Configuration of Guitar. Journal of the Korea Convergence Society, 6(4), 9-14. https://doi.org/10.15207/JKCS.2015.6.4.009
  3. Y. K. Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150. https://doi.org/10.15207/JKCS.2018.9.5.145
  4. G. G. Choi & J. U. Cho. (2018). A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted. Journal of the Korea Convergence Society, 9(11), 271-276. https://doi.org/10.15207/JKCS.2018.9.11.271
  5. J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Structural Analysis due to The Configuration of Door Hinge. Journal of the Korea Convergence Society, 6(3), 59-64. https://doi.org/10.15207/JKCS.2015.6.3.059
  6. J. I. Lee. (2017). The Convergence Design for Stiffness and Structure Advancement of Automotive Body. Journal of the Korea Convergence Society, 8(4), 189-197. https://doi.org/10.15207/JKCS.2017.8.4.189
  7. S. Y. Oh. (2012). A Traffic Hazard Prediction Algorithm for Vehicle Safety Communications on a highway. Journal of Digital Convergence, 10(9), 319-324. https://doi.org/10.14400/JDPM.2012.10.9.319
  8. K. H. Ko. (2018). An Estimating Algorithm of Vehicle Collision Speed Through Images of Blackbox. Journal of Digital Convergence, 16(9), 173-178. https://doi.org/10.14400/JDC.2018.16.9.173
  9. J. H. Hyeon, Y. H. Moon & S. W. Ha. (2018). Development of Automation Software for Corner Radius Analysis of Composite Laminated Structure. Journal of Convergence for Information Technology, 8(3), 107-114. https://doi.org/10.22156/CS4SMB.2018.8.3.107
  10. J. H. Ku. (2017). A Study on the Platform for Big Data Analysis of Manufacturing Process. Journal of Convergence for Information Technology, 7(5). 177-182. https://doi.org/10.22156/CS4SMB.2017.7.5.177
  11. M. J. Kang & J. U. Cho. (2014). A Study on Structural Durability due to the Configuration of Ripper at Excavator. Journal of the Korea Convergence Society, 5(2), 13-18. https://doi.org/10.15207/JKCS.2014.5.2.013
  12. G. G. Choi & J. U. Cho. (2018). A Convergence Study through Durability Analysis due to the Shaft Length of Automotive Constant Velocity Joint. Journal of the Korea Convergence Society, 9(8), 179-184. https://doi.org/10.15207/JKCS.2018.9.8.179
  13. J. H. Lee & J. U. Cho. (2015). Study on the Convergent Life Evaluation due to the Bumper Configuration of Multipurpose Vehicle. Journal of the Korea Convergence Society, 6(5), pp. 85-90. https://doi.org/10.15207/JKCS.2015.6.5.085
  14. J. U. Cho. (2014). Analytical Study on Durability due to the Load of Artificial Knee Joint. Journal of the Korea Convergence Society, 5(2), 7-11. https://doi.org/10.15207/JKCS.2014.5.2.007
  15. M. S. Kang, H. S. Park, J. H. Choi, J. M. Koo & C. S. Seok. (2012). Prediction of Fracture Strength of Woven CFRP Laminates According to Fiber Orientation. Transactions of the Korean Society of Mechanical Engineers-A, 36(8), 881-887. https://doi.org/10.3795/KSME-A.2012.36.8.881
  16. J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236. https://doi.org/10.15207/JKCS.2017.8.7.231
  17. C. S. Seak & S. Y. Kim. (2000). Variation of the Fracture Resistance Curve with the Change of a Size in the CT Specimen. Transactions of the Korean Society of Mechanical Engineers - A, 24(12), 2963-2971. https://doi.org/10.22634/KSME-A.2000.24.12.2963
  18. G. W. Hwang, J. U. Cho & C. D. Cho. (2016). A Property of Crack Propagation at the Specimen of CFRP with Layer Angle. Transactions of the Korean Society of Mechanical Engineers - A, 40(12), 1013-1019. https://doi.org/10.3795/KSME-A.2016.40.12.1013
  19. J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236. https://doi.org/10.15207/JKCS.2017.8.7.231