• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.747-761
• /
• 2008

In order to experiment the acoustic remote classification of seabed sediment, we achieved ground-truth data(i.e. video and grab samples, etc.) and developed post-processing for automatic classification procedure on the basis of 300 kHz MultiBeam Echo Sounder(MBES) backscattering data, which was acquired using KONGBERG Simrad EM3000 at Sock-Cho Port, East Sea of South Korea. Sonar signal and its classification performance were identified with geo-referenced video imagery with the aid of GIS (Geographic Information System). The depth range of research site was from 5 m to 22.7 m, and the backscattering amplitude showed from -36dB to -15dB. The mean grain sizes of sediment from equi-distanced sampling site(50 m interval) varied from 2.86$(\phi)$ to 0.88(\phi). To acquire the main feature for the seabed classification from backscattering amplitude of MBES, we evaluated the correlation factors between the backscattering amplitude and properties of sediment samples. The performance of seabed remote classification proposed was evaluated with comparing the correlation of human expert segmentation to automatic algorithm results. The cross-model perception error ratio on automatic classification algorithm shows 8.95% at rocky bottoms, and 2.06% at the area representing low mean grain size.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.242-251
• /
• 2013

Recently, while global concern over offshore resources exploration and development is being increased rapidly, offshore plant industry is highlighted as an industry of high added value. Along with this global trend, domestic concern over offshore plant development is being increased as well. In the overseas case, a marine geotechnical survey guideline for confirming characteristics of seabed sediments is available at the time of installation of offshore plant but such guideline is not available in our country. In this study, survey techniques fit for domestic marine environment was applied according to overseas guideline at southern coastal area, Korea. Among the marine geophysical survey techniques being proposed abroad, magnetic survey and seabed photograph were excluded. However, highly reliable data analysis was enabled for marine geophysical survey, which includes in-situ coring investigation and laboratory soil test. In addition, continuous ocean current survey was included to find scour potential due to the current around the offshore plant. Although coring depth is not so deep, we predicted geological structure through the analysis of amplitude features of seismic data. Characteristics of seabed sediments cold be obtained regionally and directly through combined analysis of marine geophysical survey data and coring data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.678-684
• /
• 2016

The detection of an underwater work space boundary is very important when an underwater construction is carried out using seabed type underwater equipment, such as underwater machines for rubble mound leveling, because it can induce industrial disasters. Therefore, divers are needed to mark the underwater work space boundary. A nylon rope is used to improve the convenience during an underwater diver's work. The results showed that the work space boundary can be detected using a sonar system. Using these results, an efficient method to detect the underwater work space boundary can be obtained when an underwater construction is carried out using seabed type underwater equipment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.263-269
• /
• 2018

Changes in water depth caused by underwater earthquakes and landslides cause sea surface undulations, which in turn propagate to the coast and result in significant damage as wave heights normally increase due to the wave shoaling process. Various types of numerical models have been developed to simulate the generation and propagation of tsunami waves. Most of tsunami models determine the initial surface of the water based on the assumption that the movement of the seabed is immediately and identically transmitted to the sea surface. However, this approach does not take into account the characteristics of underwater earthquakes that occur with time history and spatial variation. Thus, such an incomplete description on the initial generation of tsunami waves is totally reflected in the error during the simulation. In this study, the analytical solution proposed by Hammack (1973) was applied in the tsunami model in order to simulate the generation of initial water surface elevation by the change of water depth with time history and its propagation. The developed solution is expected to identify the relationship among various type of seabed motions, initial surface undulations, and wave speeds of elevated water surfaces.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.781-792
• /
• 2020

Mine tailings, which are inevitably formed by the development of manganese nodules, manganese crusts, and hydrothermal seafloor deposits, have attracted attention because of their quantity and potential toxicity. However, there is a lack of data on the quantity of mine tailings being generated, their physicochemical properties, and their effects as environmental hazards and on marine ecosystems in general. The importance of treating mine tailings in an environmentally friendly manner has been recognized recently and related reduction/treatment methods are being considered. In the case of deep-sea mineral resource development, if mine tailings cannot be treated aboard a ship, the issue becomes one of the cost of transporting them to land and solving the problem of environmental pollution there. Therefore, the Korea Institute of Ocean Science and Technology conducted research on the harmfulness of mine tailings, their effect on marine ecosystem, the diffusion model of contaminated particles, and candidate purification treatment technologies based on five representative controlling factors: 1) effects of pollution /on the environment, 2) effects of environmental/ biological hazards, 3) diffusion of particles, 4) mineral dressings, and 5) reducing/processing mine tailings. The results of this study can provide a basis for minimizing environmental problems by providing scientific evidences of the environmental effects of mine tailings. In addition, it is also expected that these results could be applied to the treatment of pollutants of different origins and at land-based mining waste sites.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.56-68
• /
• 2023

A system that extracts seabed topographic information by simultaneously and continuously observing the horizontal position and water depth in the sea by combining a single beam echosounder and GNSS was constructed. By applying the developed system to actual measurements of small-scale sea areas, the effectiveness of bathymetry and sea-floor topographic data acquisition using GNSS and echosounder was examined. By using the developed outdoor program DS-NAV and indoor program DS-CAD and applying the tide level data at the time of actual measurement of the target sea area, it was possible to derive bathymetry results based on the datum level i.e. approximate lowest low water level(A.L.L.W). By using the developed outdoor program DS-NAV and indoor program DS-CAD and applying the tide level data at the time of actual measurement of the target sea area, it was possible to derive the results of bathymetric survey based on the datum level. From database built through the actual measurement. it was possible to create 3D model of the sea-floor topography and extract cross-sections. The results of this study are expected to be economically useful for extracting seabed topographical information from small sea areas or in dredging sites for offshore construction.

• Ocean and Polar Research
• /
• v.45 no.1
• /
• pp.11-22
• /
• 2023

For the commercial development of deep-sea mineral resources, the International Seabed Authority is engaged in wide ranging discussions to establish the Regulations on Exploitation. The core issue of the Regulations on Exploitation is how to protect the marine environment along with the royalty system that distributes the profits from such development. The United Nations Convention on the Law of the Sea stipulates the protection of the marine environment in Part 12 (Articles 192-237) for the preservation of the marine environment, and in the 1994 Implementation Agreement, the protection of the marine environment at the stage of application for approval of the plan of work together with the Regulations on Exploration for the protection of the marine environment. For this purpose, certain obligations are imposed on the applicants. In the Regulations on Exploitation, financial systems such as environmental performance guarantee, insurance, and environmental compensation funds, which were not found in the Regulations on Exploration, are added to further specify the measures for marine environment protection generally stipulated in the 1982 Law of the Convention or 1994 Implementation Agreement. Regarding the financial system for marine environment protection, the Marine Environmental Protection and Conservation Informal Working Group meeting is revising the purpose of the environmental compensation fund. Among these financial system elements, it is judged that there is a possibility that the environmental performance guarantee and insurance may overlap considerably, and it is also thought that the establishment of the environmental compensation fund can also provide a substantial sum of money that will meet the purpose of the compensation fund in terms of securing its financial resources. In this paper, the question is posed as to whether or not this can be accomplished. In this respect, this paper examines the environmental performance guarantee, insurance, and environmental compensation fund, which are necessary for the protection of the marine environment of the deep seabed, but which can impose appropriate obligations on contractors for the commercial development of deep seabed mineral resources. At the same time as figuring out how it is operated in relation to relevant domestic laws, I would like to propose a plan to reflect the implications derived from the domestic law operation process in the Regulations on Exploitation.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.36-41
• /
• 1998

본 논문에서는 부분파수적분법과 유전자알고리즘기법의 조합을 통한 광대역 신호로 부터 직접적인 해저지질특성치의 역산기법을 제시하였다. 광대역주파수신호의 시간영역 모 의는 부분파수적분법을 사용하여 계산시간을 단축하였고, 다수의 국부최소점이 존재하는 역 산문제에 유전자알고리즘기법을 적용한 전역되적점에 대한 탐색을 수행하였다. 본 방법을 사용하여 해저퇴적층의 지질특성 요소에 대한 역산을 수행하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.161-162
• /
• 2004

탄성 매질에서의 음파 반사 특성에 나타나는 임피던스 변화 특성을 고찰하였다. 접지각이 작은 영역에서의 임피던스 값은 접지각에 관계없이 거의 일정한 값을 가지고 해저면 Type 변화에는 민감하게 변화하는 특성을 나타내었다.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.97-105
• /
• 2000

This paper presents an automatic mesh generation considering water depth, which is based on the depth interpolation. The key feature of this method is that the position of a mesh on any depth in the shallow water area can be generated. The Examples are carried out, and the results are shown to be good. This method is shown to be a useful and powerful tool for the flow calculation for the seabed topography.