• 한국결정성장학회지
• /
• 제30권1호
• /
• pp.7-11
• /
• 2020

TiZrN 코팅의 도핑 공정에서 탄소 페이스트 증착 방식에 따른 탄소의 용해성 변화를 격자왜곡(lattice distortion)과 원자농도(atomic concentration)를 통해 비교 및 고찰하였다. 딥코팅, 스핀코팅과 스크린프린팅 방식을 이용하여 탄소 페이스트를 도포한 후, 레이저를 조사하여 탄소 구배층(carbon gradient layer)을 형성시켰다. 모든 구배층은 탄소가 도핑되는 구조였으며, 두께 및 탄소 도핑량은 페이스트 도포 방식에 의존하였다. 결정 구조 분석 결과, 딥코팅에 의해 코팅층을 도핑할 때 보다 스핀코팅과 스크린프린팅에 의해 코팅층을 도핑하였을 때, 더 큰 격자 팽창이 일어남을 확인할 수 있었다. 또한 XPS depth profile을 통해 딥코팅에 의한 탄소 구배층 두께는 약 30 nm, 스핀코팅과 스크린프린팅의 경우 대략 100 nm로 더 깊은 구배층이 형성됨을 확인하였다. 침탄 전 코팅의 경도는 약 30 GPa였으며, 침탄 후에는 딥코팅 시편의 평균 경도가 약 31 GPa였고 스핀코팅과 스크린프린팅의 평균 경도는 대략 37 GPa로 증가한 것으로 보아 탄소 도핑을 통한 격자팽창 및 구배층의 영향을 확인하였다.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.23-33
• /
• 2011

This experimental focus to characterize luminescence properties related to CNT (Carbon Nano Tube) element dispersedly implanted in ZnS-based phosphor thin film panel fabricated by a screen printing method. More specifically FE-SEM measurements, L-V(Luminescence vs. Voltage) and photo luminescence were carried out to determine an optimum value of CNT concentration and film thickness for the thin film structure of CNT-ZnS:(Cu, Al) by the screen printing method. We confirmed that an optimum value of CNT concentration in the ZnS:(Cu, Al) film panel is about 0.75 wt% resulting that the electric conductivity is 1.6 times higher than that of pure CNT sample and showing that the luminescence intensity is increasing until the optimum concentration. Clearly, CNT is presenting in the luminescence process providing a pathway for the creation of hot electron and a channel for the electron-hole recombination but overly inserted CNT may hinder to produce the hot electron for making an avalanching process. In case of the overly doped CNT 1.0 wt% in the ZnS-based phosphor, the luminescence intensity is decreasing although the electric conductivity is exponentially increasing. Based on these results, we realized that hot electron occurred by the external electric field or exciton arose by the external photon source are reduced dramatically over the critical value of CNT concentration because CNT element provide various isolated residues in the composites of ZnS based phosphor rather than pathway or channel for the D-A(Donnor to Acceptor) pair transition or the radiative recombination of electron-hole.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.71-77
• /
• 2011

표면실장형 수동소자인 0402, 0603, 1005 칩에 대한 인쇄 주요인자 결정 및 공정 최적화를 실험계획법을 통해 실시하였다. 실험에 사용된 솔더는 Sn-3.0Ag-0.5Cu와 Sn-0.7Cu이며, 공정변수로는 스텐실 두께, 스퀴지 각도, 인쇄 속도, 기판분리 속도, 스텐실과 기판간의 갭이며, 인쇄압력은 2 $kgf/cm^2$로 고정하였다. 분산분석을 통해 인쇄효율에 영향을 미치는 주요인자가 스텐실 두께와 스퀴지 각도임을 확인할 수 있었다. 주요인자인 스텐실 두께와 스퀴지 각도를 변화시켜 인쇄효율의 최적화 영역을 확인하였고, 0402, 0603, 1005 칩 모두 스퀴지 각도가 $45^{\circ}$ 이하일 경우 인쇄효율이 높았다. 스텐실 두께를 변화할 경우 칩 크기에 따라 인쇄효율이 다른 양상을 보였는데, 0402, 0603 칩에서는 스텐실 두께가 얇을수록 높은 인쇄효율을 보였으며, 1005 칩에서는 스텐실 두께가 두꺼울수록 높은 인쇄효율을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.275-276
• /
• 2008

• 한국의상디자인학회지
• /
• 제16권4호
• /
• pp.229-235
• /
• 2014

This study conducted a research on burn-out printing convergence technology for cellulose blend knit fabrics. Printing technology, which forms color pattern on the fabric, can be generally classified into four according to printer or printing method, e.g. screen printing, roller printing, rotary printing, digital printing. However, these printing methods are flat in design or pattern, which have limitation to overcome monotonousness of fabric, so that recently burn-out process method, which expresses three-dimensional pattern effect by treating chemical on the surface of fabric as the method to appeal its esthetics to the customers. Particularly, in case of cellulose/polyester composite material, first, it is proceeded in 2 processes, by dyeing cellulose or polyester fabric and burning out cellulose fabric, in this process, due to pollution caused by disperse dye migration, color of polyester fabric part could be discolored, which has high falt risk. This research considered coloring burn-out technique, which simultaneously proceed dyeing and burn-out by reducing dyeing and burn-out process to 1 stage, which were proceeded in 2 stages previously. As the research result, it was confirmed that reasonable depth of roller was 0.04~0.06mm in roller printing process, heat treatment condition of burn-out far-infrared radiation was $185^{\circ}C{\times}30m/min$. Color fastness to washing was confirmed to be 4-5 grade, color fastness to rubbing, 3-4 grade, color fastness to light, 4 grade. Also, it was confirmed that energy reduction effect appeared 38.19%, in case of energy cost per yard compared to the existing production, also, 19.74%, in case of production cost.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.102-112
• /
• 2002

Cathode ray tubes (CRT) are the most common electronic display in use in information technology. The CRT consists of an electron gun, electrostatic or magnetic fields to direct the electron beam, and a phosphor screen. When the electron beam strikes the phosphor screen, the phosphor generates light. The phosphor screen has formed by precipitation method, electro-forming and centrifuge method. The high quality product was achieved by electro-forming or centrifuge method. Now applying method is electro-forming used with phosphor and Eh(isopropyl alcohol). Now applying method has been much consumption of raw-material, dirty working environment, dangerous fire and require of high cost. New method to form phosphor surface of monochrome is required to improve this matter. This study was developed novel method to form the phosphor surface by heat-transfer method. This method have advantages of simple process, automatization, clean environment, saving raw material and saving running-cost.

• Transactions on Electrical and Electronic Materials
• /
• 제7권2호
• /
• pp.72-75
• /
• 2006

Ferroelectric PZT heterolayered thick films were fabricated by the alkoxide-based sol-gel method. PZT(Zr/Ti=60/40) paste was made and alternately screen-printed on the $Al_2O_3$ substrates. We have introduced a press-treatment to obtain a good densification of screen printed films. The porosity of the thick films was decreased with increasing the applied pressure and the thick films pressed at $0.6ton/cm^2$ showed the dense microstructure and thickness of about $76{\mu}m$. The relative dielectric constant increased with increasing the applied pressure. The remanent polarization and coercive field increased with increasing applied pressure and the values for the PZT thick films pressed at $0.6ton/cm^2$ were $16.6{\mu}C/cm^2$, 76.9 kV/cm, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.427-431
• /
• 2002

A screen printed graphite electrode has been developed for a simple and sensitive determination of phenolic compounds in an aqueous solution. The electrode developed uses a simple and effective screen printing technique with ${\alpha}-Cyclodextrin({\alpha}-CD)$ modified graphite ink. Phenols were captured on the surface of the ${\alpha}-CD$ modified electrode through complex formation. The phenol/ ${\alpha}-CD$ complex was deposited and quantified electrochemically using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square wave voltammetry (SWV). The optimization of the experimental parameters was performed in regard to electrode composition, pH, temperature, sample preconcentration time. Interferences from other organic compounds were investigated. The detection limit for phenols was 500 ${\pm}7$ nM for DPV, with the linear range of 0.5 ${\mu}M$ -25.0 ${\mu}M$ and 30 ${\pm}2$ nM for SWV, with the linear range of 30 nM - $50{\mu}M$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.917-919
• /
• 2009

Effects of nano-silver contents(15~50wt%) on screen printed-etched gate electrodes and electrical characteristics of OTFTs were investigated. As Ag contents increased, the screen-printed film was transferred exactly without spreading and obtained the densely-packed layer with a stable and excellent conductivity but, its thickness was increased and surface became rougher. It was found that the leakage current of MIM devices and off-state currents of OTFTs became larger due to poor step coverage of PVP dielectric layer on the thick and rough gate electrodes for nano-Ag inks with Ag contents more than 30wt%.

• 폴리머
• /
• 제36권2호
• /
• pp.169-176
• /
• 2012

저항형 습도센서의 개발을 위하여 스크린 인쇄방법으로 glass epoxy(GE) 기재 위에 핑거의 수와 그 사이의 간격이 다른 여러 가지 바이트형의 금 전극을 제조하였다. 전극의 기본적인 구조는 핑거 수가 3, 4 및 5를 가지며 간격은 각각 310과 460 ${\mu}m$이다. 전극은 처음에 은 나노 페이스트로 전극 패턴을 인쇄하고 연속적으로 Cu, Ni 및 Au를 무전해 도금을 진행하여 제조하였다. 감습성 고분자 전해질은 [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride(MDBAC)과 methyl methacrylate(MMA)의 공중합체를 사용하였으며 스크린 인쇄 방법으로 Au 전극/GE 기재 위에 인쇄하였다. 이렇게 제조된 습도 센서의 20-95%RH 영역의 상대습도 대 로그 임피던스 그래프에서 좋은 직선성을 보여주었으며 히스테리시스는 1.5%RH 이하 및 75초의 응답 및 회복 속도를 보여주었다. 전극의 구조는 고분자 저항형 습도센서의 감습특성에 큰 영향을 미치며 전해질 고분자와 전극 사이의 활성화 에너지, 온도의존성, 감도, 직선성 및 히스테리시스와 같은 감습특성 등의 차이를 비교하였고 특히 이온의 이동에 관여하는 활성화 에너지 및 온도 의존성에 큰 영향을 미쳤다.