Browse > Article
http://dx.doi.org/10.6111/JKCGCT.2020.30.1.007

Solid solubility of carbon in TiZrN coating by paste deposition methods for laser carburization  

Lee, Sungchul (Department of Materials Science and Engineering, Incheon National University)
Kim, Seonghoon (School of Materials Science and Engineering, Pusan National University)
Kim, Jaeyoung (College of Global Business, Korea University)
Kim, Bae-Yeon (Department of Materials Science and Engineering, Incheon National University)
Lee, Heesoo (School of Materials Science and Engineering, Pusan National University)
Publication Information
Journal of the Korean Crystal Growth and Crystal Technology / v.30, no.1, 2020 , pp. 7-11 More about this Journal
Abstract
Carbon solubility on the paste deposition methods in the carbon-doped TiZrN coating was investigated in terms of lattice distortion and atomic concentration. After depositing the carbon paste by the dip coating, spin coating and screen printing, the laser was ablated to form the carbon gradient layer. Thickness and the concentration of doped carbon depended on the paste deposition method. Crystal structure analysis indicated that more lattice distortion occurred when coating layers were doped with spin coating and screen printing than when coating layers were doped with dip coating. The XPS depth profile showed that the thickness of carbon gradient layer by dip coating was about 30 nm, spin coating and screen printing are approximately 100 nm, formed more gradient layer. The hardness before laser carburization was about 30 GPa, and the hardness of 31 GPa with dip coating and 37 GPa with spin coating and screen printing. It was indicated that paste deposition methods for laser carburization contributed to lattice distortion and gradient layer.
Keywords
Carbon-doped TiZrN; Laser carburization; Carbon paste; Deposition methods;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Y. Choi, S. Jeon, M.S. Jeon, H.G. Shin, H.H. Chun, Y.S. Lee and H. Lee, "Crack propagation behavior of TiN coatings by laser thermal shock experiments", Appl. Surf. Sci. 258 (2012) 8752.   DOI
2 A.U. Chaudhry, B. Mansoor, T. Mungole, G. Ayoub and D.P. Field, "Corrosion mechanism in PVD deposited nano-scale titanium nitride thin film with intercalated titanium for protecting the surface of silicon", Electrochim. Acta 264 (2018) 69.   DOI
3 G. Abadias, V.I. Ivashchenko, L. Belliard and Ph. Djemia, "Structure, phase stability and elastic properties in the $Ti_{1-x}Zr_x$N thin-film system: Experimental and computational studies", Acta Mater. 60 (2012) 5601.   DOI
4 M. Abdoos, K. Yamamoto, B. Bose, G. Fox-Rabinovich and S. Veldhuis, "Effect of coating thickness on the tool wear performance of low stress TiAlN PVD coating during turning of compacted graphite iron (CGI)", Wear 422 (2019) 128.
5 F.F. Klimashin and P.H. Mayrhofer, "Ab initio-guided development of super-hard Mo-Al-Cr-N coatings", Scr. Mater. 140 (2017) 27.   DOI
6 Y. Li, P. Zhang, P. Bai, K. Su and H. Su, "TiBCN-ceramicreinforced Ti-based coating by laser cladding: Analysis of processing conditions and coating properties", Coat. 9 (2019) 407.   DOI
7 S. Jeon, E. Hong, S. Kwon and H. Lee, "Influence of Carbon interstitials to $Ti_{1-x}Me_xN$ (Me = Zr, Al, Cr) coatings by pulsed laser ablation on wear resistance", Appl. Surf. Sci. 443 (2018) 329.   DOI
8 E. Hong, T. Kim, S. Lee, J.W. Lee and H. Lee, "Atomic structure and residual stress of carbon-doped TiMeN (Me = Zr, Al, and Cr) coatings on mechanical properties", Ceram. Int. 45 (2019) 9192.   DOI
9 R. Jagdheesh, B. Pathiraj, E. Karatay, G.R.B.E. Romer and A.J.H. Veld, "Laser-induced nanoscale superhydrophobic structures on metal surfaces", Langmuir 27 (2011) 8464.   DOI
10 M.S. Trtica, B.M. Gakovic, L.T. Petkovska, V.F. Tarasenko, A.V. Fedenev, E.I. Lipatov and M.A. Shulepov, "Surface modifications of TiN coating by the pulsed TEA $CO_2$ and KrCl laser", Appl. Surf. Sci. 225 (2004) 362.   DOI
11 Y. Danlos, S. Costil, H. Liao and C. Coddet, "Influence of Ti-6Al-4V and Al 2017 substrate morphology on Ni-Al coating adhesion - Impacts of laser treatments", Surf. Coat. Technol. 205 (2011) 2702.   DOI
12 Y. Rong, Y. Ming, W. Ji, D. Li, A. Mei, Y. Hu and H. Han, "Toward industrial-scale production of perovskite solar cells: screen printing, slot-die coating, and emerging techniques", J. Phys. Chem. Lett. 9 (2018) 2707.   DOI
13 L.E. Scriven, "Physics and applications of dip coating and spin coating", Mater. Res. Soc. Symp. Proc. (1988) 121.
14 C.J. Brinker, G.C. Frye, A.J. Hurd and C.S. Ashley "Fundamentals of sol-gel dip coating", Thin Solid Films 201 (1991) 97.   DOI
15 B. Denkena and D. Biermann, "Cutting edge geometries", CIRP Annals 63 (2014) 631.   DOI
16 X. Wang, P.Y. Kwon, C. Sturtevant and J. Lantrip, "Tool wear of coated drills in drilling CFRP", J. Manuf. Process 15 (2013) 127.   DOI
17 Landau LD and Levich VG, "Dragging of a liquid by a moving plate", Acta Phys. Chim. URSS 17 (1942) 42.
18 N. Sahu, B. Parija and S. Panigrahi, "Fundamental understanding and modeling of spin coating process: A review", Indian J. Phys. 83 (2009) 493.   DOI
19 I.J. Fox, M.F.J. Bohan, T.C. C lay pole and D.T. Gethin, "Film thickness prediction in halftone screen-printing", Proceedings of the Institution of Mechanical Engineers, Part E:Proc. Inst. Mech. Eng. E 217 (2003) 345.   DOI