• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7189-7195
• /
• 2015

모멘트법(MoM)인 TE(transversw electric) 전장 적분 방정식(EFIE)으로 완전 전기도체(PEC) 원통을 산란 해석하였다. 이 과정에서 나타나는 특이점(singlarity)과 과대 특이점(hypersingularity)을 포함한 적분 계산은 어렵기 때문에 수치해석 방법으로 특이점을 고립시켜 자체항(self-term)을 얻었다. 모멘트법에서 base 함수와 test 함수의 선택은 수치해석 결과의 정확도와 수렴에 있어 매우 중요한 요인이됨은 알려져 있는 사실이다. basis 함수와 test함수를 달리하여 세 가지 방법으로 PEC 원통에 유도된 전류를 구하였다. 이렇게 구한 결과를 해석학적 방법과 모멘트법에서 얻은 전류와 비교하여 상대 효율 전류 오차를 구하였으며 어떤 결합 방법이 효율적인지 확인하였다. 또한 각 결합방법에 따른 상대 효율 전류 오차의 수렴율을 구하여 가장 정확한 결과를 얻을 조건을 찾았다. 전류 오차의 가장 빠른 수렴오더(order of convergence) 2.528은 펄스 base 함수/델타 test 함수 결함 조건에서 얻었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권4호
• /
• pp.259-264
• /
• 2020

Radiation causes radiation hazards in the human body. In Korea, a case of radiation necrosis occurred in 2014. In this study, the scatter and shielding efficiency according to lead shielding were classified into epidermis and dermis for 0.511 MeV used in nuclear medicine. In this study, experiments were conducted using the slab phantom that represents calibration and the dose of human trunk. Experimental results showed that the shielding rate of 0.25 mmPb was 180% in the epidermis and 96% in the dermis. Shielding at 0.5mmPb showed shielding rates of 158%in the epidermis and 82% in the dermis. As a result of measuring the absorbed dose by subdividing the thickness of the dermis into 0.5 mm intervals, when the shielding was carried out at 0.25 mmPb, the dose appeared to be about 120% at 0.5 mm of the dermis surface, and the dose was decreased at the subsequent depth. Shielding at 0.5 mmPb, the dose appeared to be about 101% at the surface 0.5 mm, and the dose was measured to decrease at the subsequent depth. This result suggests that when lead aprons are actually used, the scattering rays would be sufficiently removed due to the spaces generated by the clothes and air, Therefore, the scattered ray generated from lead will not reach the human body. The ICRU defines the epidermis (0.07), in which the radiation-induced damage of the skin occurs, as the dose equivalent. If the radiation dose of the dermis is considered in addition, it will be helpful for the evaluation of the prognosis for radiation hazard of the skin.

• 센서학회지
• /
• 제10권1호
• /
• pp.16-23
• /
• 2001

국부적인 측정을 수행하는 일반적인 광섬유 센서에 비해 분포형 광섬유 센서는 광섬유의 길이방향을 따라 모든 위치에서 측정이 가능하며 보다 넓은 영역의 측정을 수행할 수 있다. 브릴루인 산란 분포형 광섬유 센서를 구조물의 건전성 감시에 이용할 때에는 광섬유 센서의 일반적인 부착 방법인 에폭시를 이용한 표면부착 방법을 사용하게 된다. 본 논문에서는 에폭시를 이용하여 브릴루인 분포형 광섬유 센서를 구조물의 표면에 부착하였을 때 구조물의 변형률 변화를 광섬유 센서가 정확히 측정해 낼 수 있는지에 대해 유한요소법을 통한 검증을 수행하였다. 구조물로부터 에폭시, 광섬유 코팅, 클래딩을 통해 코어로 전달되는 변형률의 전달률을 해석을 통해 확인하였으며 변형률 분포로부터 에폭시 끝 단의 자유 경계면이 미치는 영향을 살펴보았다.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.311-319
• /
• 2019

This paper proposes an acceleration of the multi-level fast multipole algorithm(MLFMA) by using a double interpolation method. The MLFMA has been primarily used to conduct scattering analysis of electrically large targets, e.g. stealth aircraft. In the MLFMA, radiation functions of each basis functions are first precomputed, and then aggregated. After transfer calculations for the aggregations, each interaction is disaggregated, and then received in the testing function. The key idea of the proposed method is to decrease the sampling rates of the radiation and receiving functions. The computational complexity of the unit sphere integration in terms of the testing functions is thus highly alleviated. The remaining insufficient sampling rate is then complemented by using additional interpolation. We demonstrate the performance of the proposed method through radar cross-section(RCS) calculations for realistic aircraft.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.51-54
• /
• 2003

We analyzed radiative properties of aerosols, $CO^{2}$ and clouds using Optical Properties of Aerosols and Clouds(OPAC) and the Column Radiation Model (CRM). From OPAC, if the soot component is disregarded, dust-like components depict the highest extinction values in the solar spectral range and the lowest. single scattering albedoes, which are attributable to the presence of large particles. In the dust aerosol, the high absorptivity in the infrared may induce a warming of the lower atmospheric layer in the nighttime. The radiative properties of aerosols, clouds and double $CO^{2}$ using the CRM model at Seoul (37N, 127.4 E) on 3 April 2003 were calculated. The solar zenith angle is 65˚ and the surface albedo is 0.1836 during the clear day. The aerosol optical depth change 0.14 to 1.7, which is derived during Asian dust days in Korea. At this time, abedo by aerosols is considered as 0.3. In cloudy condition, the short wave cloud forcing on both the TOA and the surface is -193.89 $Wm^{-2}$ and -195.03 $Wm^{-2}$, respectively, and the long wave cloud forcing is 19.58 $Wm^{-2}$ and 62.08 $Wm^{-2}$, respectively. As a result, the net radiative cloud forcing is -174.31 $Wm^{-2}$ and -132.95 $Wm^{-2}$, respectively. We calculate also radiative heating rates by double $CO^{2}$ during the clear day. The $CO^{2}$ volumn mixing ratio is 3.55E-4.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.112-117
• /
• 2006

In this paper we present that the effects of polymer adsorption on stabilities and CMP performance of ceria abrasive particles. Characterization of ceria abrasive particles in the presence of poly(vinyl pyrrolidone) (PVP) was performed by the measurements of adsorbed amounts of PVP, average sizes, and the back scattering intensities of the ceria abrasive particles as functions of PVP molecular weight and PVP concentration. The ceria abrasive particles in the presence of PVP were used to polish $SiO_2\;and\;Si_3N_4$ films deposited on Si wafers in order to understand the effect of PVP adsorption on chemical mechanical polishing (CMP) performance, together with ceria abrasive particles without PVP. Adsorption of PVP on the ceria abrasive particles enhanced the stability of ceria abrasive particles due to steric stabilization of the thick adsorbed layer of PVP. Removal rates of the deposited $SiO_2\;and\;Si_3N_4$ films by the ceria abrasive particles in the presence of PVP were much lower than those in the absence of PVP and their magnitudes were decreased with an increase in the concentration of free PVP chains in the dispersion media. This suggests that the CMP performance in the presence of PVP could be mainly controlled by the hydrodynamic interactions between the adsorbed PVP chains and the free ones. Moreover, the molecular weight dependence of PVP on the removal rates of the deposited films was hardly observed. On the other hand, high removal rate selectivity between the deposited films in the presence of PVP was not observed.

• 한국인터넷방송통신학회논문지
• /
• 제18권3호
• /
• pp.61-69
• /
• 2018

본 논문에서는 밀리미터파대역의 공대지 레이다에서 이중 편파 채널을 활용한 지상 표적을 식별하기 위한 방법을 제안한다. 먼저 공대지 레이다의 조우 상황에서 Push-Broom 표적 탐지 방법을 설명하고 수신 신호를 모델링한다. 시간 영역 스펙트럼 추정 기법인 RELAX 알고리즘을 이용하여 산란점을 추출하고 표적의 특성 벡터를 생성하였다. 그리고 이를 기반으로 각각의 4표적에 대한 DB를 구성하였다. 제안하는 방법으로 표적 식별 시뮬레이션을 수행한 결과 이중 편파 채널의 데이터를 이용하면 단일 채널에 비해서 표적 식별률이 최대 15% 이상 높아지는 것을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제21권5호
• /
• pp.500-504
• /
• 2005

Water samples were collected at 7 sites located along the River Nakdong on 30 occasions. Water qualities, size and fractal dimension ($d_F$) of suspended particles were measured. Laser light scattering method was used to obtain the size and $d_F$ of suspended particles. The average size of particles in this river ranged from $89{\mu}m$ and $169{\mu}m$, which appears to be relatively coarse compared with other rivers worldwide. The average $d_F$ of suspended particles in this study ranged from 1.8 to 1.9. The correlation analysis showed that DO, TN, $NO_3$ and chlorophyll-${\alpha}$ had significant positive relationships with particles size, whereas flow rates and TSS had negative relationships. Interestingly, the factors of which had positive relationships with particles size showed negative relationship with the fractal dimension ($d_F$) of suspended particles. Generally, as the size of particles increased, the fractal dimension of particles decreased which was indicating the shape of the larger particles became more irregular.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.194-199
• /
• 1998

대기 무선 광통신시스템은 레이저 광의 높은 지향 특성에 의해 저전력 통신이 가능하나, 대기공간을 전송채널로 사용하기 때문에 전송되는 광신호는 흡수, 산란, 교란 등의 대기효과에 의해 심각한 영향을 받는다. 따라서, 본 논문에서는 이러한 대기효과를 고려하여 대기 광무선 LOS (line of sight) 통신링크의 링크방정식을 구한 후, 컴퓨터 시뮬레이션을 통해 무중계 전송거리를 구함으로써 시스템 성능을 평가하였다. 그 결과 주어진 데이터 전송율에서 무중계 전송 가능한 거리가 제시되었고, 주어진 비트 오류율에서 전송거리가 약간 증가함에 따라 데이터 전송율이 급격히 감소함을 알 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.99-100
• /
• 1993

Calorimetric (D.S.C) studies were carried out on the nylon 4,6 single crystals grown from 1,4-butanediol solution at various crystallisation temperatures, based on the assessment of the lamellar thickness by small angle x-ray scattering. Samples were annealed mainly ot get rid of residual solvents inside the crystals. The effect of annealing on the crystal perfection is inferred from the measured thermal properties of the crystals. Accordig to the scanning rates less than 80 K/min., D. S C. melting peaks indicate that changes in the internal morphology of nylon 4,6 crystals preapred at different crystallisation temeratures yield a thermodynamic melting temperature. Tm, of 319 $^{\circ}C$, for the infinitely extended crystal thickness (1/ι). The obtained heat of fusion value for the inginite crystal thickness, Ho, was 270 J/g from the plot of measured feat of fusion ($\Delta$Hm) vs. reciprocal crystal thickness (1/ι). based on these values, the fold surface energy, $\delta$e. of 65.4 erg/$\textrm{cm}^2$ was obtained from Hoffman-Waeeks equation. The thermodynamic melting temperature and heat of fusion of the infinite crystal thickness for the solution grow nylon 4,6 single crystals are found to be higher than of the reported corresponding solution grown nylon 6,6 single crystals. pbtained crystallinity from D. S. C measurements ranges from 40 to 50 %, which is close to the reported yalue for the nylon 6,6 single ctystals but lower than we expected.