• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1277-1286
• /
• 2001

Aluminum 5052/Aramid Fiber Reinforced Plastic(Al5052/AFRP) laminates are applied to the fuselage-wing intersection. The Al5052/AFRP laminates suffer from the cyclic bending moment of variable amplitude during the service. Therefore, the influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in Al5052/AFRP laminate was investigated in this study. Al5052/AFRP laminate composite consists of three thin sheets of Al5052 and two layers of unidirectional aramid fibers. The cyclic bending moment fatigue tests were performed with five different levels of bending moment. The shape and size of the delamination zone formed along the fatigue crack between Al5052 sheet and aramid fiber-adhesive layer were measured by an ultrasonic C-scan. The relationships between da/dN and ΔK, between the cyclic bending moment and the delamination zone size, and between the fiber bridging mechanism and the delamination zone were studied. Fiber failures were not observed in the delamination zone in this study. It represents that the fiber bridging modification factor should turn out to increase and that the fatigue crack growth rate should decrease. The shape of delamination zone turns out to be semi-elliptic with the contour decreased non-linearly toward the crack tip.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.526-532
• /
• 2000

The paste on the glass or fabrication of the PDP(Plasma Display Panel) barrier rib was selectively etched using focused A $r_{+}$ laser(λ=514 nm) and Nd:YAG(λ=532, 266 nm) laser irradiation. The depth of the etched grooves increase with increasing a laser fluence and decreasing a laser beam scan speed. Using second harmonic of Nd:YAG laser(532 nm) the etching threshold laser fluence was 6.5 mJ/c $m^2$ for the sample of PDP barrier rib. The thickness of 180 ${\mu}{\textrm}{m}$ of the sample on the glass was clearly removed without any damage on the glass substrate by fluence of 19.5J/c $m^2$beam scan speed of 20${\mu}{\textrm}{m}$ /s. In order to increase the etch rate of the barrier rib material barrier rib samples heated by a resistive heater during laser irradiation. The heated sample has many defects and becomes to be fragile. This imperfection of the structure compared to the sample without heat treatment allows the effective etching by the focused laser beam. The etch rates were 65${\mu}{\textrm}{m}$/s and 270 ${\mu}{\textrm}{m}$/s at room temperature and 20$0^{\circ}C$, respectively.y.

• Carbon letters
• /
• 제15권3호
• /
• pp.171-179
• /
• 2014

An attempt was made to investigate the effect of the preparation temperature on the electrocapacitive performance of polypyrrole (PPY)/graphene oxide (GO) nanocomposites (PNCs). For this purpose, a series of PNCs were prepared at various temperatures by the cetyltrimethylammonium bromide-assisted dilute-solution polymerization of pyrrole in presence of GO (wt%) ranging from 1.0 to 4.0 with ferric chloride as an oxidant. The formation of the PNCs was ascertained through Fourier-transform infrared spectrometry, X-ray diffraction spectra, scanning electron microscopy and simultaneous thermogravimetric-differential scanning calorimetry. The electrocapacitive performance of the electrodes derived from sulphonated polysulphone-bound PNCs was evaluated through cyclic voltammetry with reference to Ag/AgCl at a scan rate (V/s) ranging from 0.2 and 0.001 in potassium hydroxide (1.0 M). The incorporation of GO into the PPY matrix at a reduced temperature has a pronounced effect on the electrocapacitive performance of PNCs. Under identical scan rates (0.001 V/s), PNCs prepared at $10{\pm}1^{\circ}C$ render improved specific conductivity (526.33 F/g) and power density (731.19 W/Kg) values compared to those prepared at $30{\pm}1^{\circ}C$ (217.69 F/g, 279.43 W/Kg). PNCs prepared at $10{\pm}1^{\circ}C$ rendered a capacitive retention rate of ~96% during the first 500 cycles. This indicates the excellent cyclic stability of the PNCs prepared at reduced temperatures for supercapacitor applications.

• Journal of Electrochemical Science and Technology
• /
• 제11권2호
• /
• pp.148-154
• /
• 2020

Highly ordered mesoporous manganese oxide films were electrodeposited onto indium tin oxide coated (ITO) glass using sodium dodecyl sulfate (SDS) and ethylene glycol (EG) which were used as a templating agent and stabilizer for the formation of micelle, respectively. The manganese oxide films synthesized with surfactant templating exhibited a highly mesoporous structure with a long-range order, which was confirmed by SAXRD and TEM analysis. The unique porous structure offers a more favorable diffusion pathway for electrolyte transportation and excellent ionic conductivity. Among the synthesized samples, Mn₂O₃-SDS+EG exhibited the best electrochemical performance for a supercapacitor in the wide range of scan rate, which was attributed to the well-developed mesoporous structure. The Mn₂O₃ prepared with SDS and EG displayed an outstanding capacitance of 72.04 F g^-1, which outperform non-porous Mn₂O₃ (32.13 F g^-1) at a scan rate of 10 mV s^-1.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.300-312
• /
• 1993

The material deterioration of service-exposed boiler tube steels in fossil power plant was evaluated by using the electrochemical technique namely, modified electrochemical potentiokinetic reactivation(EPR). It was focused that the passivation of Mo$_{6}$C carbide which governs the mechanical properties of Mo alloyed steels did not occur even in the passivity region of steel in sodium molybdate solution and the reactivation peak current (Ip) observed as the result of non-passivation indicating the precipitation of Mo$_{6}$C carbides. To obtain the optimal test conditions for the field test by using the specially designed electrochemical cell, the effects of scan rate, the surface roughness and the pH of electrolyte on Ip value were also investigated. Furthermore, the change of mechanical properties occurred during the long time exposure at high temperature was evlauated quantitatively by small punch(SP) tests and micro hardness test taking account of the metallurgical changes. It is known that reactivation peak current (Ip) has a good relationship with Larson-Miller Parameter(LMP) which represents the information about material deterioration occurred at high temperature environment. In addition it was possible to estimate the ductile-brittle transition temperature (DBTT) by means of the SP test. The Sp test could be, therefore, suggested as a reliable test method for evaluating the material degradation of boiler tube steels. From the good correaltion between the SP DBTT and Ip values shown in this study, it was knows that the change of mechanical properties could be evaluated non-destructively by measurring only Ip values.ues.

• 한국콘텐츠학회논문지
• /
• 제13권1호
• /
• pp.294-299
• /
• 2013

본 연구는 MRI 검사 중 방송을 통한 의도적인 접촉이 환자의 불안 감소에 유용한가를 알아보기 위해서 실험군과 대조군을 통해 다음과 같은 결과를 얻었다. 1. 두 집단 간의 검사 전 불안점수의 동질성은 인정되지 않아 유용성 결과를 도출하지 못하였다. 2. 방송을 통한 의도적 접촉이 객관적 불편감(t=-2.214, p=.031)을 낮추는 결과를 보였다. 3. 방송을 통한 의도적 접촉이 긴장감(t=-3.722, p=.000), 공포감(t=-2.74, p=.009)을 낮추는 결과를 보였다. 4. 방송을 통한 의도적 접촉이 맥박수(t=-4.180, p=.000)가 감소하는 결과를 보였다. 결론적으로 방송을 통하여 의도적인 접촉을 시도하면서 MRI 검사를 진행하였을 경우 검사 후 검사 대상자의 혈압에는 유의한 영향을 미치지 못하였으나 환자의 주관적, 객관적 불편감의 감소, 또한 활력 징후의 하나인 맥박이 감소됨을 알 수 있었다. 따라서 방송을 통한 의도적 접촉이 환자의 심리적인 긴장감을 완화시키고 안정감을 느끼게 하여 환자 care와 검사에 효과적인 대체요법이 될 수 있을 것으로 사료된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제29권4호
• /
• pp.257-260
• /
• 2006

전신 PET/CT 검사에서 $^{18}F-FDG$의 방사성의약품을 투여한 환자가 방사선원이 되기에 환자로부터 종사자의 피폭선량 예측을 위한 PET 검사실에서 환자 주변의 공간선량률을 측정 분석하였다. 연간 개인피폭선량은 대학병원의 핵의학 분야에 근무하는 종사자가 방사선종양학과와 소규모병원의 진단방사선 분야에 비해 검사 중에 환자로부터 방출되는 공간선량률에 의하여 개인피폭선량이 높게 나타났다. 그리고 PET/CT 검사에서 $^{18}F-FDG$를 이용하는 경우에 $^{99m}Tc$ 보다 공간선량률이 $4{\sim}6$배 정도로 훨씬 높고, 촬영실 전체에 공간선량률이 분포함을 알 수 있었다. 따라서 방사성의약품 투여 후 안정실이나 PET 검사 중에 촬영실 내에서는 항상 방사선 방어의 기본인 시간은 짧게, 거리는 멀리, 차폐를 고려하여 PET 검사를 수행하는 것이 매우 중요하고, 환자로부터의 공간선량률에 따른 종사자의 개인피폭선량을 줄이기 위한 최선의 노력이 필요하다.

• 센서학회지
• /
• 제9권4호
• /
• pp.316-326
• /
• 2000

본 논문에서는 백색광 간섭현상 (white light interferometry)을 위한 신호처리 알고리즘을 제안한다. 제안하는 알고리즘으로 간섭기의 광경로 절대길이 (absolute optical path length)를 정확하게 측정할 수 있다. 그리고 제안하는 알고리즘은 간섭 무늬 (fringe scan)의 상호 상관관계 함수 (cross-correlation function)와 가설 검증을 사용한다. 가설 검증은 간섭 무늬의 상호 상관관계 함수가 대칭이 되는 봉우리를 영차 간섭 봉우리 (zero order fringe peak) 후보자로 선정함으로써 영차 간섭 봉우리를 오판할 확률을 줄인다. 산탄잡음(shot noise)이 제안된 알고리즘의 성능에 미치는 영향을 컴퓨터 모의 실험을 통하여 조사하였다. 모의 실험결과와 보외법 (extrapolation)을 사용하여 신호대산탄잡음비 (signal-to-shot noise ratio)가 31 dB 보다 클 때의 알고리즘의 성능을 예측하였다. 간섭 봉우리의 세 가지 매개변수 변화 (신호대산탄잡음비, 간섭 스캔 샘플링율 광원의 가간섭성 길이)에 따른 영차 간섭 봉우리 추정 오차를 계산하였다. 모의 실험 결과를 통하여 제안한 알고리즘이 영차 간섭 무늬 봉우리를 정확하게 판별할 수 있음을 보여주었다. 제안하는 신호처리 알고리즘은 소프트웨어적인 기법으로서 경제적이고 속도가 빠르며 간단한 알고리즘이다.

• Radiation Oncology Journal
• /
• 제11권1호
• /
• pp.91-96
• /
• 1993

From September 1989 to June 1992,22 patients with nasopharyngeal carcinoma were treated in Asan Medical Center with an external beam of 60 Gy followed by a boost dose of 15 Gy HDR brachytherapy. There were 5 females and 17 males with median age of 44 years (range: 20-69 years). All patients were histologically confirmed and staged by physical examination, CT scan and/or MRI. By the AJCC TNM staging system, there were 2 patients with stge II (T2NO), 4 with stage III (T3NO, T1-3N1), and 16 with stage IV (T4 or N2-3). Four patients received chemotherapy with 5-FU and cisplatin prior to radiotherapy. All patients were followed up periodically by a telescopic examination and radiologic imaging study of CT scan or MRI with a median follow-up time of 13 months (range: 3-34 months). Twenty one patients showed a complete response ore month after completing therapy and one patient showed a complete response after three months. At the time of this analysis, seventeen patients remain alive without evidence of disease, but four patients developed distant metastasis and one patient died a month after treatment. The local control rate was $100{\%}$ in a median follow-up time of 13 months. The two year overall and disease free survival rates by the Kaplan-Meier method were $94{\%}$ and $67{\%}$, respectively. Serious radiation sequelae have not been observed yet. Although longer follow-up is needed, this retrospective analysis suggests that HDR brachytherap. given as a boost therapy for nasoharyngeal carcinoma may improve the local control. To reduce the incidence of distant metastasis, we need to develop a more effective systemic chemotherapy.

• 한국조리학회지
• /
• 제18권4호
• /
• pp.266-276
• /
• 2012

본 연구는 이스트의 소금 스트레스 시간이 반죽의 발효와 제품의 특성에 미치는 결과를 분석하여 산업적으로 이용하고자 이루어졌다. 반죽의 가스 생성율과 발효율, pH, 부피, 비용적, TPA, crumScan, 색도와 관능검사 등을 통하여 분석하였다. 반죽의 가스 생성율과 발효율을 살펴본 결과 침지시간이 45분일 때 가장 가스 보유력이 좋은 것으로 나타났고, 침지시간이 15분, 30분, 45분의 pH 값이 5.74로 빵을 만들기에 가장 적절한 값이었다. 부피와 비용적은 45분이 가장 좋았으며, 조직감 분석결과 대조구의 경도가 가장 낮고 부드러웠으며, 탄력성은 크게 차이가 없었다. CrumScan결과 기공의 조밀도는 대조구가 가장 낮았으며, 기공의 찌그러짐 정도는 45분이 가장적었다. 색도 분석 결과는 L값은 75분, a값과 b값은 15분이 가장 높았다. 관능검사에서는 질감, 향, 식감, 맛에서 가장 기호도가 높은 침지시간 45분이 전체적인 기호도에서도 역시 가장 선호되었다.