• 인터넷정보학회논문지
• /
• 제4권3호
• /
• pp.31-37
• /
• 2003

본 논문에서는 유한상태머신을 위한 효율적인 비주사 DFT (design-for-testability) 기법을 제안한다. 제안된 기법은 순차회로 모델이 아닌 조합회로 모델을 사용한 ATPG를 수행하여 짧은 테스트 패턴 생성 시간과 완벽한 고장 효율을 보장한다. 또한 완전주사 기법이나 다른 비주사 DFT 기법에 비해 적은 면적 오버헤드를 보이며 테스트 패턴을 칩의 동작속도로 인가한다는 장점이 있다. 실험결과에서는 MCNC`91 벤치마크 회로를 이용하여 제안된 기법의 효율성을 입증한다.

• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2730-2741
• /
• 1993

A mathematical model of the seeker scan-loop which is composed of a spin-stabilized gyroscope and its driving signal processors is derived. The derived model has a transmission zero pair on the imaginary axis near to the required bandwidth. The LQG/LTR design methodology is evolved for the derived scan-loop model. To implement the designed LQG/LTR compensator to the actual plant, the compensator order is reduced using the internally balanced realization method. The performances of the LQG/LTR compensator are tested and compared with those of the P-control. Especially, stability-robustnessexperiments for model uncertainties represented in the form of time-delays are performed. It is demonstrated that the LQG/STR compensator is actually very robust to model uncertainties.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.89.1-89
• /
• 2001

• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.85-97
• /
• 2002

STUMPS는 스캔 구조를 이용한 자체 테스트로 널리 사용되는 기술이다. 다중 스캔 체인에 STUMPS를 적용할 때 병렬 패턴 생성기로 사용되는 LFSR은 인접한 비트 시퀀스 사이에 높은 correlation이 존재하므로 회로의 고장 검출률을 저하시킨다. 이러한 문제를 해결하기 위해서 하드웨어 오버헤드 증가에도 불구하고 LFSR과 스캔 체인의 입력 사이에 부가적인 조합회로가 놓인다. 본 논문은 다중 스캔 체인을 갖는 순차회로에 대해 회로 자체의 스캔 체인들을 사용하여 유사 무작위 테스트 패턴을 생성하는 효과적인 테스트 패턴생성 방법과 그 구조를 소개한다. 제안된 테스트 패턴 생성 기술은 기존에 패턴 생성기로 사용되는 LFSR과 조합회로의 구성을 사용하지 않으므로 하드웨어 오버헤드를 줄일 수 있으며 충분히 높은 고장 검출률을 얻을 수 있다. 또한 스캔 체인 당 단지 수 개의 XOR 게이트만이 회로 변형을 위해 필요하므로 설계가 매우 간단하다.

• 전자공학회논문지
• /
• 제52권6호
• /
• pp.70-76
• /
• 2015

본 논문은 FPGA 내부의 경계 스캔 체인을 자가 테스트 회로로써 재활용하기 위한 FPGA 자가 테스트 회로 설계 기술을 소개한다. FPGA의 경계 스캔 체인은 테스트나 디버깅 기능뿐만 아니라 각 셀에 연결되어 있는 입출력 핀의 기능을 설정하기 위해서도 사용되기 때문에 일반적인 칩의 경계 스캔 셀보다 매우 크다. 따라서, 본 논문에서는 FPGA 경계 스캔 셀의 구조를 분석하고 소수의 FPGA 로직과 함께 테스트 패턴 생성과 결과 분석이 가능하도록 설계한 BIST(built-in-self-test) 회로를 제시한다. FPGA의 경계 스캔 체인을 자가 테스트를 위하여 재사용함으로써 면적 오버헤드를 줄일 수 있고 보드상에서 프로세서를 사용한 온-라인(on-line) 테스트/모니터링도 가능하다. 실험을 통하여 오버헤드 증가량과 시뮬레이션 결과를 제시한다.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.178-184
• /
• 2004

In this paper, we designed an image processing system for the high speed line-scan camera which adopts the new memory model we proposed. As a resolution and a data rate of the line-scan camera are becoming higher, the faster image processing systems are needed. But many conventional systems are not sufficient to process the image data from the line-scan camera during a very short time. We designed the memory controller which eliminates the time for transferring image data from the line-scan camera to the main memory with high-speed SRAM and has a dual-port configuration therefore the DSP can access the main memory even though the memory controller are writing the image data. The memory controller is implemented by VHDL and Xilinx SPARTAN-IIE FPGA.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.35-41
• /
• 1998

This paper presents a decoupling controller of the missile seeker scan loop with a spin-stabilized platform. A precise seeker motion with respect to the scan command is essential for the higher acquisition probability of the target. As the seeker scan loop is a deeply cross-coupled two input two output system, an accurate pointing or scanning for each axis to the target is very difficult, even though provided with the help of a high performance controller. When a decoupling control is applied to the seeker scan loop, the cross-coupling between two axes can be reduced to a remarkable amount. As a low order of controller is required for the real time operation, a PI controller with decoupling filter is suggested and compared with other controllers. A linearized dynamic model of seeker scan loop is used and validated through the comparison of experimental results of step responses.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.595-606
• /
• 2020

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.866-869
• /
• 2000

To improve quality of the ground surface, we have to consider a number of parameters. But it is difficult to make experiment with many parameters. Most of all experiments try to search optimal grinding condition with conservative factors such as feed rate, depth of cut, wheel rotating speed, etc. But This paper attempts to view the significance of some different factors effecting on the surface roughness by introducing helical scan grinding method and material removal rate. The design of experiment is used to find the optimal grinding condition which minimizes the surface roughness value bout optical glass material. To analyze experimental results, ANOVA(ANalysis of VAriation) is used. Discussion on the result about helical scan grinding is also given.

• 한국임상수의학회지
• /
• 제35권3호
• /
• pp.93-96
• /
• 2018

This study aimed to establish an injection protocol to determine the precise CT scan timing in canine abdominal multi-phase CT using the test bolus method. Three dynamic scans with different contrast injection parameters were performed using a crossover design in eight normal beagle dogs. A contrast material was administered at a fixed dose of 200 mg iodine/kg as a test bolus for dynamic scans 1 and 2, and 600 mg iodine/kg as a main bolus for dynamic scan 3. The contrast materials were administered with 1 ml/s in dynamic scan 1, and 3 ml/s in dynamic scan 2 and 3. The mean arrival time to the appearance of aortic enhancement in dynamic scan 3 was similar to that in dynamic scan 2, and different significantly to that in dynamic scan 1. The mean arrival time to the peak aortic and pancreatic parenchymal enhancement in dynamic scan 3 was similar to that in dynamic scan 1, and different significantly to that in dynamic scan 2. In multi-phase CT scan, a test bolus should be injected with the same injection duration of a main bolus, to obtain the precise arrival times to peak of arterial or pancreatic parenchymal enhancement.