Fashion & Textile Research Journal (한국의류산업학회지)

The Society of Fashion and Textile Industry (한국의류산업학회)
권호 표지
DOI QR코드

DOI QR Code

Application Two-Dimensional Pattern Development of Cycling Tights based on the Three-Dimensional Body Scan Data of High School Male Cyclist

  • Park, Hyunjeong (Dept. of Clothing and Textiles, Chonnam National University/University Industry Liaision Office of CNU Healthcare Ware R&BD Center/Research Institute of Human Ecology, Chonnam National University) ;
  • Do, Wolhee (Dept. of Clothing and Textiles, Chonnam National University/University Industry Liaision Office of CNU Healthcare Ware R&BD Center/Research Institute of Human Ecology, Chonnam National University)
  • Received : 2020.03.13
  • Accepted : 2020.05.15
  • Published : 2020.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.

Keywords

References

  1. Bartels, V. T. (2005). Physiological comfort of sportswear. Textiles in Sport, 177-203. doi:10.1533/9781845690885.3.177
  2. Choi, J. Y. (2016). 3D skin length deformation of lower body for guidelines on 3D non-uniform compression suits and performance evaluations of compression suits with isokinetic muscular function, cardiopulmonary ability and wear comfort. Unpublished doctoral dissertation, Chungnam National University, Daejeon.
  3. Choi, J. Y., & Hong, K. H. (2015). 3D skin length deformation of lower body during knee joint flexion for the practical application of functional sportswear. Applied Ergonomics, 48, 186-201. doi:10.1016/j.apergo.2014.11.016
  4. Choi, Y. L., & Nam, Y. J. (2009). Surface pattern comparison among lateral body types flattening 3D figure data. Fibers and Polymers, 10(6), 837-846. doi:10.1007/s12221-009-0837-7
  5. Greenberg, S. A. (2003). The history of dermatome mapping. Archives of Neurology, 60(1), 126-131. doi:10.1001/archneur.60.1.126
  6. Han, H. S., Kim, J. Y., Kim, S. M., Lim, H. S., & Park, C. K. (2014). The development of an automatic pattern-making system for made-to-measure clothing. Fibers and Polymers, 15(2), 422-425. doi:10.1007/s12221-014-0422-6
  7. Iberall, A. S. (1970). The experimental design of a mobile pressure suit. Journal of Basic Engineering, 92(2), 251-264. doi:10.1115/1.3424984
  8. Jeong, Y. H., Hong, K. H., & Kim, S. J. (2006). 3D pattern construction and its application to tight-fitting garments for comfortable pressure sensation. Fibers and Polymers, 7(2), 195-202. doi:10.1007/BF02908267
  9. Kim, S. Y. (2008). Engineering design process of tight-fit performance sportswear using 3D information of dermatomes and skin deformation in dynamic posture. Unpublished doctoral dissertation, Chungnam National University, Daejeon.
  10. Liu, K., Kamalha, E., Wang, J., & Agrawal, T. K. (2016a). Optimization design of cycling clothes' patterns based on digital clothing pressures. Fibers and Polymers, 17(9), 1522-1529. doi:10.1007/s12221-016-6402-2
  11. Liu, K., Wang, J., Zhu, C., & Hong, Y. (2016b). Development of upper cycling clothes using 3D-to-2D flattening technology and evaluation of dynamic wear comfort from the aspect of clothing pressure. International Journal of Clothing Science and Technology, 28(6), 736-749. doi:10.1108/IJCST-02-2016-0016
  12. Luo, S., Wang, J., Yao, X., & Zhang, L. (2017). A novel method for determining skin deformation of lower limb in cycling. The Journal of The Textile Institute, 108(9), 1600-1608. doi:10.1080/00405000.2016.1269403
  13. Manshahia, M., & Das, A. (2014). Effect of fiber and fabric constructional parameters on dynamic behavior of compression athletic wear. Fibers and Polymers, 15(2), 414-421. doi:10.1007/s12221-014-0414-6
  14. Nakazawa. (1999). Garment and body type. Seoul: Yehaksa.
  15. Park, H. J. (2018). Development of tight-fit tights and sizing system of cycle wear for male highschool cyclist. Unpublished doctoral dissertation, Chonnam National University, Gwangju.
  16. Park, H. J., & Do, W. H. (2015a). A comparative study for anthropometric measurements of highschool boys and highschool boys cyclist. Fashion & Textile Research Journal, 17(2), 258-264. doi:10.5805/SFTI.2015.17.2.258
  17. Park, H. J., & Do, W. H. (2015b). A research on the actual wearing condition of cycle wear for athletes - Focusing on male cyclist in domestic highschool. Fashion & Textile Research Journal, 17(4), 597-603. doi:10.5805/SFTI.2015.17.4.597
  18. Park, S. Y., & Kim, K. H. (2019). A study on the patterns of roadbike pants through 3D body scanning analysis and evaluation of movement. Journal of Korean Traditional Costume, 22(3), 41-55. doi:10.16885/jktc.2019.09.22.3.41
  19. Shin, S. M., & Chun, J. S. (2013). Changes in back body surface measurements for dynamic postures in the form of baseball batting motion with a 3D body scanning. International Journal of Human Ecology, 14(1), 41-55. doi:10.6115/ijhe.2013.14.1.41
  20. Union Cycliste Inetrnationale. (n. d.). Cycling, a global activity. Retrieved from https://www.uci.org/world-cycling-centre/development/cycling-global-activity.
  21. Dermatome. (n. d.). Wikipedia. Retrieved from https://en.wikipedia.org/wiki/Dermatome_(anatomy)
  22. Zhang, D. L., Wang, J., & Yang, Y. P. (2014). Design 3D garments for scanned human bodies. Journal of Mechanical Science and Technology, 28(7), 2479-2487. doi:10.1007/s12206-014-0605-5