Browse > Article
http://dx.doi.org/10.5805/SFTI.2020.22.5.595

Application Two-Dimensional Pattern Development of Cycling Tights based on the Three-Dimensional Body Scan Data of High School Male Cyclist  

Park, Hyunjeong (Dept. of Clothing and Textiles, Chonnam National University/University Industry Liaision Office of CNU Healthcare Ware R&BD Center/Research Institute of Human Ecology, Chonnam National University)
Do, Wolhee (Dept. of Clothing and Textiles, Chonnam National University/University Industry Liaision Office of CNU Healthcare Ware R&BD Center/Research Institute of Human Ecology, Chonnam National University)
Publication Information
Fashion & Textile Research Journal / v.22, no.5, 2020 , pp. 595-606 More about this Journal
Abstract
This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.
Keywords
3D human scan data; 2D clothing pattern; cycling posture; cycling tights; dermatome;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Choi, Y. L., & Nam, Y. J. (2009). Surface pattern comparison among lateral body types flattening 3D figure data. Fibers and Polymers, 10(6), 837-846. doi:10.1007/s12221-009-0837-7   DOI
2 Greenberg, S. A. (2003). The history of dermatome mapping. Archives of Neurology, 60(1), 126-131. doi:10.1001/archneur.60.1.126   DOI
3 Han, H. S., Kim, J. Y., Kim, S. M., Lim, H. S., & Park, C. K. (2014). The development of an automatic pattern-making system for made-to-measure clothing. Fibers and Polymers, 15(2), 422-425. doi:10.1007/s12221-014-0422-6   DOI
4 Iberall, A. S. (1970). The experimental design of a mobile pressure suit. Journal of Basic Engineering, 92(2), 251-264. doi:10.1115/1.3424984   DOI
5 Jeong, Y. H., Hong, K. H., & Kim, S. J. (2006). 3D pattern construction and its application to tight-fitting garments for comfortable pressure sensation. Fibers and Polymers, 7(2), 195-202. doi:10.1007/BF02908267   DOI
6 Kim, S. Y. (2008). Engineering design process of tight-fit performance sportswear using 3D information of dermatomes and skin deformation in dynamic posture. Unpublished doctoral dissertation, Chungnam National University, Daejeon.
7 Liu, K., Kamalha, E., Wang, J., & Agrawal, T. K. (2016a). Optimization design of cycling clothes' patterns based on digital clothing pressures. Fibers and Polymers, 17(9), 1522-1529. doi:10.1007/s12221-016-6402-2   DOI
8 Liu, K., Wang, J., Zhu, C., & Hong, Y. (2016b). Development of upper cycling clothes using 3D-to-2D flattening technology and evaluation of dynamic wear comfort from the aspect of clothing pressure. International Journal of Clothing Science and Technology, 28(6), 736-749. doi:10.1108/IJCST-02-2016-0016   DOI
9 Luo, S., Wang, J., Yao, X., & Zhang, L. (2017). A novel method for determining skin deformation of lower limb in cycling. The Journal of The Textile Institute, 108(9), 1600-1608. doi:10.1080/00405000.2016.1269403   DOI
10 Manshahia, M., & Das, A. (2014). Effect of fiber and fabric constructional parameters on dynamic behavior of compression athletic wear. Fibers and Polymers, 15(2), 414-421. doi:10.1007/s12221-014-0414-6   DOI
11 Park, H. J. (2018). Development of tight-fit tights and sizing system of cycle wear for male highschool cyclist. Unpublished doctoral dissertation, Chonnam National University, Gwangju.
12 Park, H. J., & Do, W. H. (2015a). A comparative study for anthropometric measurements of highschool boys and highschool boys cyclist. Fashion & Textile Research Journal, 17(2), 258-264. doi:10.5805/SFTI.2015.17.2.258   DOI
13 Park, H. J., & Do, W. H. (2015b). A research on the actual wearing condition of cycle wear for athletes - Focusing on male cyclist in domestic highschool. Fashion & Textile Research Journal, 17(4), 597-603. doi:10.5805/SFTI.2015.17.4.597   DOI
14 Dermatome. (n. d.). Wikipedia. Retrieved from https://en.wikipedia.org/wiki/Dermatome_(anatomy)
15 Park, S. Y., & Kim, K. H. (2019). A study on the patterns of roadbike pants through 3D body scanning analysis and evaluation of movement. Journal of Korean Traditional Costume, 22(3), 41-55. doi:10.16885/jktc.2019.09.22.3.41   DOI
16 Shin, S. M., & Chun, J. S. (2013). Changes in back body surface measurements for dynamic postures in the form of baseball batting motion with a 3D body scanning. International Journal of Human Ecology, 14(1), 41-55. doi:10.6115/ijhe.2013.14.1.41   DOI
17 Union Cycliste Inetrnationale. (n. d.). Cycling, a global activity. Retrieved from https://www.uci.org/world-cycling-centre/development/cycling-global-activity.
18 Zhang, D. L., Wang, J., & Yang, Y. P. (2014). Design 3D garments for scanned human bodies. Journal of Mechanical Science and Technology, 28(7), 2479-2487. doi:10.1007/s12206-014-0605-5   DOI
19 Nakazawa. (1999). Garment and body type. Seoul: Yehaksa.
20 Bartels, V. T. (2005). Physiological comfort of sportswear. Textiles in Sport, 177-203. doi:10.1533/9781845690885.3.177
21 Choi, J. Y. (2016). 3D skin length deformation of lower body for guidelines on 3D non-uniform compression suits and performance evaluations of compression suits with isokinetic muscular function, cardiopulmonary ability and wear comfort. Unpublished doctoral dissertation, Chungnam National University, Daejeon.
22 Choi, J. Y., & Hong, K. H. (2015). 3D skin length deformation of lower body during knee joint flexion for the practical application of functional sportswear. Applied Ergonomics, 48, 186-201. doi:10.1016/j.apergo.2014.11.016   DOI