• 한국항해항만학회지
• /
• 제34권2호
• /
• pp.117-122
• /
• 2010

Since fuzzy controllers are nonlinear, it is more difficult to set the controller gains and to analyse the stability compared to conventional PID controllers. This paper proposes a fuzzy PD+I controller for tracking control which uses a linear fuzzy inference(product-sum-gravity) method based on a conventional linear PID controller. In this scheme the fuzzy PD+I controller works similar to the control performance as the linear PD plus I(PD+I) controller. Thus it is possible to analyse and design an fuzzy PD+I controller for given systems based on a linear fuzzy PD controller. The scaling factors tuning scheme, another topic of fuzzy controller design procedure, is also introduced in order to fine performance of the fuzzy PD+I controller. The scaling factors are adjusted by a real-coded genetic algorithm(RCGA) in off-line. The simulation results show the effectiveness of the proposed fuzzy PD+I controller for tracking control problems by comparing with the conventional PID controllers.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권1호
• /
• pp.36-43
• /
• 1999

This paper proposes a new hybrid genetic algorithm for auto-tuning fuzzy controllers improving the performance. In general, fuzzy controllers use pre-determined moderate membership functions, fuzzy rules, and scaling factors, by trial and error. The presented algorithm estimates automatically the optimal values of membership functions, fuzzy rules, and scaling factors for fuzzy controllers, using a hybrid genetic algorithm. The object of the proposed algorithm is to promote search efficiency by the hybrid optimization technique. The proposed hybrid genetic algorithm is based on both the standard genetic algorithm and a modified gradient method. If a maximum point is not be changed around an optimal value at the end of performance during given generation, the hybrid genetic algorithm searches for an optimal value using the the initial value which has maximum point by converting the genetic algorithms into the MGM(Modified Gradient Method) algorithms that reduced the number of variables. Using this algorithm is not only that the computing time is faster than genetic algorithm as reducing the number of variables, but also that can overcome the disadvantage of genetic algoritms. Simulation results verify the validity of the presented method.

• 한국정보통신학회논문지
• /
• 제6권1호
• /
• pp.109-114
• /
• 2002

본 논문에서는 나노규모의 채널길이를 가지는 Si-기반 MOSFET의 문턱전압은 시뮬레이션하여 그 결과를 나타내었다. 180nm의 게이트 길이를 가지는 소자를 기본소자로 하여 정전압 스켈링과 평면 스켈링을 적용하여 소자를 축소하고 시뮬레이션 하였다. 이러한 MOSFET은 LDD(lightly doped drain)구조를 가지고 있으며, 이 구조는 드레인 영역에서의 전계의 크기와 단채널 효과를 줄여준다. 이 영역에서의 고전계현상은 축소에 기인한다. 이러한 소자들의 문턱전압을 조사하고 분석하였다. 이러한 분석은 IC의 응용한계 및 VLSI의 기본자료로 사용될 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1037-1051
• /
• 2024

This paper presents the construction results and design of the UNIST Reactor Innovation platform for small modular reactors as a versatile testbed for exploring innovative technologies. The platform uses simulant fluids to simulate the thermal-hydraulic behavior of a reference small modular reactor design, allowing for cost-effective design modifications. Scaling analysis results for single and two-phase natural circulation flows are outlined based on the three-level scaling methodology. The platform's capability to simulate natural circulation behavior was validated through performance calculations using the 1-D system thermal-hydraulic code-based calculation. The strategies for evaluating cutting-edge technologies, such as the integration of a solid oxide electrolysis cell for hydrogen production into a small modular reactor, are presented. To overcome experimental limitations, the hardware-in-the-loop technique is proposed as an alternative, enabling real-time simulation of physical phenomena that cannot be implemented within the experimental facility's hardware. Overall, the proposed versatile innovation platform is expected to provide valuable insights for advancing research in the field of small modular reactors and nuclear-based hydrogen production.

• 한국위성정보통신학회논문지
• /
• 제8권3호
• /
• pp.10-14
• /
• 2013

본 논문에서는 저전력 기술인 DVFS (Dynamic Voltage Frequency Scaling) 응용을 위하여, 동작주파수의 변화에도 소비전력이 일정한 특성을 갖는 전류모드 회로를 적용함에 있어서, 저속 동작에서 소비전력이 과다한 전류모드 회로의 문제점을 전류모드 회로에서 sub-threshold 영역 동작의 MOSFET을 적용함으로써 소비전력을 최소화하는 설계기술을 소개한다. 회로설계는 MOSFET BSIM 3모델을 사용하였으며, 시뮬레이션한 결과, strong-inversion 동작일 때 소비전력은 $900{\mu}W$이었으나, sub-threshold 영역으로 동작하였을 때, 소비전력이 $18.98{\mu}W$가 되어, 98 %의 소비전력의 절감효과가 있음을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.311-316
• /
• 2001

소자의 고집적을 위한 특성분석 기술은 빠른 변화를 보이고 있다. 이에 따라 고집적 소자의 특성을 시뮬레이션을 통하여 이해하고 이에 맞게 제작하는 기술을 매우 중요한 과제 중의 하나가 되었다. 소자가 마이크론급에서 나노급 이하로 작아지면서 그에 맞는 소자개발을 위해 여러 가지 구조가 제시되고 있는데 본 논문에서는 TCAD를 이용하여 여러 가지 구조 중에서 고농도로 도핑된 ground plane 위에 적층하여 만든 EFI MOSFET와 LDD구조의 단점을 개선한 newEPI MOSFET에 대해 조사하였다. 이 구조의 특성과 임팩트이온화와 전계 그리고 I-V 특성 곡선을 저 농도로 도핑된 드레인(LDD) MOSFET와 비교 분석하였다. 또한 TCAD의 유용성을 조사하여 시뮬레이터로서 적합함과 나노구조 소자에서의 스켈링이론의 적합함을 보았다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.656-668
• /
• 2013

This paper presents a wavelet-fuzzy based controller for indirect field oriented control of three-phase induction motor drives. The discrete wavelet transform is used to decompose the error between the actual speed and the command speed of the induction motor drive into different frequency components. The transformed error coefficients along with the scaling gains are used for generating the control component of the motor. Self-tuning fuzzy logic is used for online tuning of the scaling gains of the controller. The proposed controller has the ability to meet the speed tracking requirements in the closed loop system. The complete indirect field oriented control scheme incorporating the proposed wavelet-fuzzy based controller is investigated theoretically and simulated under various dynamic operating conditions. The simulation results are compared with a conventional proportional integral controller and a fuzzy based controller. The speed control scheme incorporating the proposed controller is implemented in real time using a digital processor control board. Simulation and experimental results validate the effectiveness of the proposed controller.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.319-329
• /
• 2016

High-level design aids are mandatory for design of a continuous-time delta-sigma modulator (CTDSM). This paper proposes a top-down methodology design to generate a noise transfer function (NTF) which is compensated for excess loop delay (ELD). This method is applicable to low pass loop-filter topologies. Non-ideal effects including ELD, integrator scaling issue, finite op-amp performance, clock jitter and DAC inaccuracies are explicitly represented in a behavioral simulation of a CTDSM. Mathematical modeling using MATLAB is supplemented with circuit-level simulation using Verilog-A blocks. Behavioral simulation and circuit-level simulation using Verilog-A blocks are used to validate our approach.

• 한국환경과학회지
• /
• 제29권1호
• /
• pp.15-23
• /
• 2020

The determination of soil characteristics is important in the simulation of rainfall runoff using a distributed FLO-2D model in catchment analysis. Digital maps acquired using remote sensing techniques have been widely used in modern hydrology. However, the determination of a representative parameter with spatial scaling mismatch is difficult. In this investigation, the FLO-2D rainfall-runoff model is utilized in the Yongdam catchment to test sensitivity based on three different methods (mosaic, arithmetic, and predominant) that describe soil surface characteristics in real systems. The results show that the mosaic method is costly, but provides a reasonably realistic description and exhibits superior performance compared to other methods in terms of both the amount and time to peak flow.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.438-440
• /
• 2004

Energy consumption has become an increasingly important consideration in designing real-time embedded systems. In this paper, we propose a voltage scaling method to reduce energy consumption in fixed priority real-time systems using variable voltage processors. The Hyperperiod of tasks is divided into dimains. The most suitable voltage of each domain is determined off-line and stored in a table. During task execution, the voltage of processor is adjusted according to the information of the table. A simulation result shows that the proposed method can reduce 80% of power consumption in comparison to no power management. The difference to the optimal EDF based method is only 5%.