• 전기화학회지
• /
• 제15권1호
• /
• pp.19-26
• /
• 2012

표준 전해액에 2중량%의 VC(vinylene carbonate)와 FEC(fluoroethylene carbonate)를 각각 첨가한 전해액으로부터 흑연 음극 표면에 SEI(solid electrolyte interphase) 층을 형성시키고, SEI 특성에 따른 흑연 음극의 저온($-30^{\circ}C$) 충방전 특성을 조사하였다. 흑연의 충 방전 용량은 FEC를 첨가한 전해액, 표준 전해액, 그리고 VC를 첨가한 전해액의 순서로 감소하였고, 충 방시 발생하는 과전압은 반대경향을 보이며 증가하였다. 이는 첨가제의 종류에 따라 생성된 SEI 층의 저항과 전하전달저항에 차이가 있음을 설명하는데, 이를 SEI 층의 화학 조성과 두께를 비교하여 확인하였다. 표준 전해액으로부터 생성된 SEI 층은 C-O 성분을 포함하는 고분자 형태의 화합물과 리튬 염의 환원분해로 생성된 $Li_xPF_yO_z$ 등으로 구성되었다. VC를 포함한 전해액으로부터 생성된 SEI 층은 C-O 화합물 비율이 높고 조밀하여 리튬 염의 분해가 억제되어 얇은 피막이 생성됨에도 불구하고 가장 큰 저항 값을 보였다. 반면에 FEC로부터 생성된 SEI 층은 C-O 성분의 비율이 VC를 첨가한 전해액의 경우보다는 작으면서도 리튬 염의 분해가 크지 않아서, 리튬 이온의 이동이 가장 용이한 피막을 형성하고 있어 가장 낮은 피막저항 및 전하전달 저항을 나타내었다. 결론적으로 FEC를 첨가제로 사용한 경우 생성된 SEI 층의 저항이 가장 작아서 흑연 음극의 저온특성이 가장 우수하였다.

• 대한기계학회논문집A
• /
• 제36권4호
• /
• pp.405-412
• /
• 2012

종래 아연의 부식 속도를 줄이는 가장 일반적인 방법은 $Cr^{+6}$를 도포하여 화학적으로 개조하는 것이었다. 그러나 $Cr^{+6}$는 현재 환경 보호법 때문에 사용이 제한되어 있다. 따라서 자자들은 Si를 가지는 유/무기 용액에 대한 아연도금강판의 최적 조건을 연구하였다. 최적 내식성은 $190^{\circ}C$에서 5분간 열처리한 조건으로 나타났다. 본 연구에서는 내식성 평가를 위하여 우레탄 용액(Urethane 20 wt.% ; S-700), Si를 가지는 유/무기 용액(Si polysilicate 10 wt.% + Urethane 10 wt.% LR-0317) 및 Si와 Ti를 가지는 2종류의 유/무기 용액(Si polysilicate 7 wt.% + Urethane 13 wt.% + Ti amorphous 0.5 wt.% ; LR-0727(1), Si polysilicate 7 wt.% + Urethane 7 wt.% + Ti amorphous 0.5 wt.% + epoxy 6wt.% ; LR-0727(2))을 사용하였다. 내식성 평가는 냉간압연 강판을 사용하여 염수분무 시험으로 실시하였다. 7시간의 염수 분무 시험에서 LR-0727(1)과 LR-0727(2) 용액이 냉간 압연 강판에 대하여 우수한 내식성을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.331-337
• /
• 2017

Thermal batteries, reserve power source, is activated by melting of molten salt at the temperature range of $350{\sim}550^{\circ}C$. To immobile the molten state electrolyte when the thermal battery is activated, the binder must be added in electrolyte. Usually, molten salts include 30~40 wt% of MgO binder to ensure electrical insulation as well as safety. However, the conventional MgO binder tends to increase ionic conductive resistance and thus the inclusion of the binder increases the total impedance of the battery. This paper mainly focused on the study of yttria stabilized zirconia (YSZ) as an alternative binder for molten salt. The chemical stability between the molten salt and YSZ is measured by XRD and DSC. And the sufficient path for ionic conduction on molten salt could be confirmed by the enhanced wetting behavior and the enlarged pore size of YSZ. The electrochemical properties were analyzed using single cell tests so that it showed the outstanding performance than that using MgO binder.

• 한국미생물·생명공학회지
• /
• 제38권2호
• /
• pp.222-226
• /
• 2010

This study was carried out to isolate and characterize the Lactobacillus plantarum with bile salt deconjugation activity that was isolated from Kimchi. Some isolates were selected and identified as L. plantarum by 16S rRNA gene sequence and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis of whole cell protein patterns. They were assayed to determine their capacities to express bile salt hydrolase (BSH) activity. Among the identified strains, L. plantarum CIB 001 showed the highest level of BSH activity. Then, resistance to gastric acidity and bile condition were analyzed for further characterization. This strain was able to maintain viability for 1h at pH 2.0 and to survive in a MRS (deMan, Rogosa, and Sharpe) broth with 1.0% of bile acids. L. plantarum CIB 001 would potentially be useful in the food industry as probiotics.

• Food Science and Biotechnology
• /
• 제27권6호
• /
• pp.1747-1754
• /
• 2018

The objective of this study was to evaluate probiotic effects of two Lactobacillus plantarum strains (GBL16 and 17) isolated from black raspberry. Results revealed that the number of GBL16 was gradually decreased as bile salt concentration was increased from 0.3 to 1%. However, GBL17 did not show any difference when GBL17 was applied to 1% bile salt, and it indicates that GBL17 is more tolerant to bile salt than GBL16. GBL17 exhibited higher heat resistance and adhesion ability to Caco-2 cells than GBL16. Regarding gut microbiome, no significant change in the number of total bacteria in intestines of mice after treatment with GBLs was determined. However, the combination of GBL16 and GBL17 significantly increased the number of total bacteria in intestines of mice after they were orally administered. Therefore, the results suggest that both GBL16 and 17 strains could be one of major probiotics that can improve human gut health.

• 원예과학기술지
• /
• 제32권6호
• /
• pp.845-852
• /
• 2014

다양한 비생물적 스트레스 중 토양 염 집적은 식물의 광합성 효율, 생장 및 수확량의 감소를 초래한다. 최근 염 저항성 향상을 위한 많은 유전자들이 보고되고 있다. 본 연구의 목적은 형질전환 배추를 이용하여 아직 기능이 밝혀져 있지 않지만 완전장이 보고된 Brassica rapa Salt Stress Resistance(BrSSR) 유전자의 기능을 검정하는 것이다. BrSSR의 생리적 역할을 분석하기 위해, BrSSR의 과발현 vector인 pSL94 vector를 이용하여 내혼계 배추('CT001')를 형질전환하였다. Quantitative real-time RT-PCR 분석에서 형질전환체의 BrSSR 발현량은 대조군 대비 2.59배까지 증가하였다. 한편, 염 처리 후 표현형 분석에서 BrSSR이 과발현된 형질전환체들이 정상적인 생장을 보여줌으로써 염 스트레스에 내성을 가지는 것을 확인할 수 있었다. Microarray 분석을 통해 구축된 염 스트레스 저항성 관련 유전자들의 발현 네트워크 상에서 BrSSR은 기존에 염 저항성 관련 유전자로 보고되어 있는 ERD15(AT2G41430), protein containing PAM2(AT4G14270), GABA-T(AT3G22200)와 매우 밀접하게 연결되어 있는 것으로 분석되었다. 위 결과들을 바탕으로 BrSSR은 염 스트레스 발생 시 식물의 생장 및 저항성에 관련된 중요한 역할을 하는 것으로 판단된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.124.2-124.2
• /
• 2016

Corrosion resistance and adhesion of electro-paint (E-paint) with fluoride conversion coating (FCC) on AZ31 Mg alloy were studied. Corrosion resistance and adhesion were studied as a function of FCC-treatment time and concentration of FCC-bath. Aqueous hydrogen fluoride (HF) solutions, with concentrations ranging from 0.5 M to 5 M, were used to form FCC on chemically polished AZ31 Mg alloy samples for six different times; 10, 30, 60, 90, 120, and 180s. The results from salt spray test (SST) showed that corrosion resistance of E-paint appeared to decrease with increasing FCC treatment times in low concentration FCC baths. The number of blisters formed on the FCC-treated samples increased with increasing FCC treatment time of more than 1 min in low concentration (0.5 M to 1 M) solutions. On the other hand, samples treated in the 5 M HF solution for 120s showed no delamination or blistering even after 1200h of SST.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.372-375
• /
• 2004

Scaling deterioration and resistance to freezing of port concrete structures due to the combined effects of chemical actions by containning chlorides and the freeze-thaw action is also a problem which has not yet been fundamentally solved. Furthermore, deterioration of concrete surface was considered as accelerate factor of concrete durability tended to decrease. Therefore, we considered the scaling measuring method and decreasing influence of durability of concrete according to kind of binders, such as OPC, Slag, Slag+Fa, due to freeze and thaw of concrete by containing chlorides. As a results of this study, it was effective method of scaling deterioration and resistance freewing of concrete, and confirmed the salt deterioration resistance effect to use slag binder against to containing chlorides.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.782-785
• /
• 2004

Salt attack is one of the serious deterioration factor with respect to the durability of concrete structure. Especially, in case of exposed rebar concrete structure in marine environment, corrosion of rebar is accelerated by penetration of $Cl^-$ from exterior. Through this path, volume of corroded rebar is increased about two and half times due to increased inner pressure originated from rust. As a consequence, the overall deterioration of concrete structure, namely, cracks, reduction of adhesive strength and pop-out is followed. In this paper, the effect of structure treatment of concrete on chloride resistance has been investigated. At the same time, the relationship among several characteristics, such as resistance to chloride, water absorption coefficient and surface hardness of concrete has been investigated. It is believed that surface performance improvement by the application of penetrative hardening agent influences on positively water absorption coefficient, surface hardness of concrete and resistance to chloride ion penetration.

• 대한안전경영과학회지
• /
• 제5권1호
• /
• pp.129-141
• /
• 2003

In this thesis, using the 400 series ferrite stainless steel such as 434LD$_2$ which are furter excellent then the existing ferric products in mechanical characteristics, and experiment has been conducted on corrosion resistance of sensor ring. The results are following. 1. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition. 2. 434LD$_2$ ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. thus the decreasing production process has been obtained. 3. As hardness value of $H_{RB}$ 80 and tensile test, 434LD$_2$ ferrite stainless steel with show a good endurance when it is combined to constant velocity joint (c/v joint), and has a good hardness properties endurable to sand and pebble impact.