• Journal of Korean Clinical Nursing Research
• /
• v.26 no.2
• /
• pp.164-174
• /
• 2020

Purpose: This study was to investigate the relationships among patient safety culture, safety competence and safety nursing activity among nurses in anesthetic and recovery rooms, and to identify the factors contributing to safety nursing activity. Methods: A descriptive correlational study was conducted. Participants were 156 nurses from 13 hospitals. Data were collected from February 11 to March 15th, 2019, and analyzed using descriptive statistics, t-test, Mann-Whitney U test, one-way ANOVA, Pearson's correlation and multiple regression analysis with SPSS statistics 24.0 Program. Results: Safety nursing activity was significantly different in relation to nurses' level of education, position at work, clinical career, clinical career at anesthetic and recovery rooms, and work experience in patient safety. Safety nursing activity demonstrated a significant positive correlation with patient safety culture and patient safety competence. Factors contributing to safety nursing activity were patient safety knowledge, skill and attitude, clinical career, clinical career at anesthetic and recovery rooms, and the patient safety improvement system which explained 57.0% of total variance of safety nursing activity. Conclusion: To improve safety nursing activities at anesthetic and recovery rooms, it is necessary to develop patient safety programs with enhanced knowledge, skill and attitude to take patient safety as a top priority.

• Safety and Health at Work
• /
• v.2 no.1
• /
• pp.26-33
• /
• 2011

Objectives: The purpose of this retrospective cohort study was to investigate the relationship between exposure of Korean workers to petrochemicals in the refinery/petrochemical industry and lymphohematopoietic cancers. Methods: The cohort consisted of 8,866 male workers who had worked from the 1960s to 2007 at one refinery and six petrochemical companies located in a refinery/petrochemical complex in Korea that produce benzene or use benzene as a raw material. Standardized mortality ratios (SMRs) and standardized incidence ratios (SIRs) were calculated for 1992-2007 and 1997-2005 based on the death rate and cancer incidence rate of the Korean male population according to job title (production, maintenance, laboratory, and office workers). Results: The overall mortality and most cause-specific mortalities were lower among these workers than those of the general Korean population. Increased SMRs were observed for leukemia (4/1.45; SMR 2.77, 95% CI: 0.75-7.09) and lymphohematopoietic cancers (5/2.51; SMR 2, 95% CI: 0.65-4.66) in production workers, and increased SIRs were also observed in leukemia (3/1.34; SIR 2.24, 95% CI: 0.46-6.54) and lymphohematopoietic cancers (5/3.39; SIR 1.47, 95% CI: 0.48-3.44) in production workers, but the results were not statistically significant. Conclusion: The results showed a potential relationship between leukemia and lymphohematopoietic cancers and exposure to benzene in refinery/petrochemical complex workers. This study yielded limited results due to a short observational period; therefore, a follow-up study must be performed to elucidate the relationship between petrochemical exposure and cancer rates.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.545-554
• /
• 2020

As recent safety accidents at construction sites can lead to serious accidents that threaten the lives of workers, the role of safety managers in charge of safety management has emerged. However, the current construction safety management system requires the improvement and simplification of the work contents due to the excessive workload and inefficient safety tasks of each person. In this respect, the main purpose of this study is to reduce the occurrence of construction safety accidents by deriving correlations using 2×2 Matrix analysis techniques through expert opinion, simplifying unnecessary tasks and identifying areas requiring improvement. Therefore, if this research reduces inefficient safety manager work and reduces job stress caused by excessive simple document work, thereby efficiently reorganizing safety manager's work to prevent blind spots of hazards and risks, it will ultimately have a great effect on preventing safety accidents at construction sites.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.131-138
• /
• 2022

This study was to investigate the characteristics of nursing students' safety by reviewing literature reported in Korea. Methods: A total of 29 articles were selected by the combination with 'safety', 'safety*', 'patient safety', 'patient safety*' 'nursing students', and 'nursing * students' from the database(via DBpia, KCI, KISS, NANET, NDSL, NL, RISS). Results: Publication year of researchs are '2015-2019' 69.0%, publication journal 'non-nursing' 79.3%, mean of participants 242.4 persons, 'under 200 persons' 51.7%, number of participating area 'one region' 48.2%, number of participating schools 'over three schools' 42.3%, participating grade 'senior in colleges' 56.2%. Participant were calculated by G*Power and unapproved by Institutional Review of Board(IRB) were 58.6%. Most of statistics measures were 'regression' 75.9%, and authors' number were '2 co-authors' 58.6%. In keyword analysis, it has changed from knowledge-oriented to patient-centered. Conclusion: Future research will require research and policy support for the development of an integrated educational approach and intervention plan to strengthen the safety competency of nursing students.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.214-223
• /
• 2013

BACKGROUND: This study focused on the development of an analytical method about dichlorprop (DCPP; 2-(2,4-dichlorophenoxy)propionic acid) which is a plant growth regulator, a synthetic auxin for agricultural commodities. DCPP prevents falling of fruits during their growth periods. However, the overdose of DCPP caused the unwanted maturing time and reduce the safe storage period. If we take fruits with exceeding maximum residue limits, it could be harmful. Therefore, this study presented the analytical method of DCPP in agricultural commodities for the nation-wide pesticide residues monitoring program of the Ministry of Food and Drug Safety. METHODS AND RESULTS: We adopted the analytical method for DCPP in agricultural commodities by gas chromatograph in cooperated with Electron Capture Detector(ECD). Sample extraction and purification by ion-associated partition method were applied, then quantitation was done by GC/ECD with DB-17, a moderate polarity column under the temperature-rising condition with nitrogen as a carrier gas and split-less mode. Standard calibration curve presented linearity with the correlation coefficient ($r^2$) > 0.9998, analysed from 0.1 to 2.0 mg/L concentration. Limit of quantitation in agricultural commodities represents 0.05 mg/kg, and average recoveries ranged from 78.8 to 102.2%. The repeatability of measurements expressed as coefficient of variation (CV %) was less than 9.5% in 0.05, 0.10, and 0.50 mg/kg. CONCLUSION(S): Our newly improved analytical method for DCPP residues in agricultural commodities was applicable to the nation-wide pesticide residues monitoring program with the acceptable level of sensitivity, repeatability and reproducibility.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.2
• /
• pp.33-39
• /
• 2017

In recent days, crash safety system based on vehicle-to-vehicle communication (V2V) has been legislated. This V2V based safety system collects information from nearby vehicles to predict any crash possibility. Thus, it requires accurate and reliable data. Regularly updated features of Basic Safety Message(BSM) will be used to test validity of various elements included in the BSM. Then, the focus was made on whether values of these elements had notable differences compared to previous values. Through this paper, the validation tool was implemented and the result from V2V OBU experiment was used to identify problems in the current model and additional features that need to be implemented in V2V OBU for more accurate BSM.

• Korean Journal of Human Ecology
• /
• v.19 no.2
• /
• pp.311-323
• /
• 2010

This study includes definitions and major issues relating to product safety, and reviews about product safety laws of Korea and of other countries. In addition, this study suggests several ideas for a future governmental policy concerning product safety and the government policies to guide in securing consumers' safety of products. First, we need to set up consumer safety policies and laws dealing with complex consumer safety issues and to integrate existing laws for the safety of products. Second, opening a consumer safety agency and training workers who have relation to the safety policy, as a profession, are necessary. Third, it is required to redefine the product safety guidelines, strengthen the safety policy and to minimize safety regulations by the government directly. Fourth, each product of the safety management policies must be regularly evaluated and given feedback for improving its effectiveness. Fifth, information gathering, disclosing, and having a feedback system related to product safety should be rebuilt for the effective management of unsafe products. In addition, laws and the aims of product safety management being changed to focus on the consumers, control on imported products, collaboration with network and mutual-assistance systems of product safety-related agencies including international organizations and major countries and taking leading roles in the world are essential.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.18-25
• /
• 2021

Specialty contractor facilities, which involve a combination of welding and commissioning, face a high risk of serious accidents such as fire, explosion, and suffocation associated with welding work, nitrogen, and argon use. In such facilities, the organizational safety culture has considerable impact on the frequency of accidents. In this study, a safety culture evaluation was conducted on specialty contractors. NOSACQ-50, a standardized survey method on safety culture, was selected as an assessment tool to evaluate the safety culture in specialized construction companies that could not afford to invest heavily in safety. The self-administered questionnaire survey was conducted with 201 workers of four construction companies and the results were analyzed. It was found that in companies with low safety culture, the occurrence of irrationality was 66.0%, while in companies with high safety culture, the occurrence of irrationality was 42.6%. Thus, the difference in the occurrence of irrationality by safety culture was statistically significant. The difference in safety culture level according to the experience of occurrence of irrationality was also significant. It was also found that the higher the belief in safety management authorization, safety responsibilities of managers, worker safety priorities, and safety system effects, the lower the probability of irrationality.

• Journal of Korean Society for Quality Management
• /
• v.50 no.2
• /
• pp.251-264
• /
• 2022

Purpose: This study aims to contribute to the research flow on the relationship between win-win supportive collaboration and safety, while noting that win-win supportive collaboration affects corporate safety-related factors such as climate, safety prevention, and behavior from the perspective of domestic small and medium-sized logistics companies that have signed contracts with large logistics companies, Methods: Based on responses from 147 small and medium-sized logistics companies, structural equation modeling is performed to examine the relationship among the factors such as supportive collaboration, safety climate, safety prevention, safety behavior. Results: Study results are as follows. Supportive collaboration of large logistics companies influence the formation of a safety climate and safety behavior within logistics SMEs positively. In addition, safety prevention and safety behavior are affected by safety climate in a positive way. Conclusion: Win-Win supportive collaboration is a driving force behind safety management practices in the supply chain leading to safety management performance, so it is necessary to consider it for the growth of the sustainable supply chain.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.99-106
• /
• 2023

This study would analyze a survey conducted with 609 workers to use the results as materials for the settlement of safety culture for the characteristics of the establishment by assessing the status of the workers' exposure to harmful risks and the impact on safety culture to present the following conclusions. This study has significance in that it found that exposure to harmful/dangerous factors in the establishment and the workers' experiences of occupational accidents affect their perception of safety culture and that in particular, 'worker safety priority' of the safety cultural factors was an important factor, and it is judged that continuous studies are necessary so that the perceptions of safety culture will spread in the establishment.