• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.53-57
• /
• 2011

Recently, the risk of safety accidents in the coastal zone has been increased due to revitalization of marine leisure and tourism. The effective measures, however, to prevent safety accidents in the coastal zone have not taken with increasing rate of the accidents. The nature of land and sea should be taken into account properly when the countermeasures to prevent the safety accidents in the coastal zone are devised, since the characteristics of land and sea are mixed in the environmental condition of the coastal zone. Through the field survey, this study analyzes the current problems on the safety in the coastal zone. Also, it suggests the future direction of the safety standards in the coastal zone on the basis of the safety improvement direction in the coastal zone.

• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.89-95
• /
• 2019

Currently, the legal framework for installation of safety facilities has not been implemented for new multi-purpose business excluding 23 multi-purpose business types, and therefore, there is a high likelihood of large number of casualties in case of fire accident. At present, the new multi-purpose business can start its operation only with administrative actions of the licensing agencies and registration to the tax agency, and it is difficult that the fire department, which is a competent safety management department, makes intervention them in the same way as before. In addition, as the licensing agency has no authority to restrict the business due to insufficient implementation of safety facilities, a lot of civil complaints occur, which causes difficulties in changing concerned laws and regulations rapidly. In this study, it is considered to analyze the legal system, status of safety management of multi-purpose business, type of new multi-use facility and characteristics of fire risk. Based on such analysis results, this study will suggest the improvement plan to solve the blind zones in the safety management, which enables the multi-purpose business to be operated within the legal framework.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.2
• /
• pp.70-75
• /
• 2019

The purpose of this study is to conduct survey on the DfS system for employees who perform construction-related tasks, analyze the results, and present improvement directions. The results of the survey showed that the system was gradually being settled, with about 82% and 93% positive results on the recognition and necessity of the system. In addition, the three highest response rates for the improvement of the system were first, improving the expertise of DfS-related performance personnel, second, improving the awareness of DfS-related actors, and third, reflecting the appropriate costs associated with DfS. For the realization of the above improvements, it was proposed to prepare a curriculum for improving the professionalism of the staff, to implement an incentive system for improvement of perception, and to prepare appropriate payment criteria for preparing reports available during the construction phase. In addition, the Korea Infrastructure Safety and Technology Corporation will need to perform its active role in order to become a system for preemptive management of risk factors for construction accidents from the design stage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.92-102
• /
• 2016

In this study, the systems and standards for temporary equipment and materials established in domestic and foreign countries are examined to provide improvement schemes and to insure their safety. Statistical analyses of the data obtained from the internet and/or field visit surveys of employees working in manufacturing, leasing, and construction companies related to temporary equipment and materials and improvement schemes were conducted to evaluate the implementation of a safety certification system for currently used temporary equipment and materials. This safety certification system has been enforced since 2009, but the number of accidents at construction sites, which are reported by the 'serious accident cases and measures in construction sites' group of the Korea Occupational Safety & Health Agency (KOSHA), has increased. The respondents' answers regarding the suitability of the items, which are required for the safety certification of the equipment and materials, were 'yes (36%)', 'no (30%)', and 'unknown (35%)'. Less than half of the answers regarding the current system were positive and most of the respondents answered that the current system does not reflect the evolution of the construction environment. A system is needed to approve items certified in foreign countries and newly developed materials and items, in addition to the (automatic) registration for the reuse of temporary equipment and materials, and improvements are needed in their safety. In this study, after examining the size and practicability of the items requiring approval from the current system, the certification methods are reevaluated and improvement schemes are provided for the system.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.429-438
• /
• 2013

In this study, compare and analyze for high-rise evacuation safety design criteria improvement about internal high-rise building egress safety rule. To the result, high-rise evacuation safety design criteria improvement data can be summarized as follows. First, should compute the evacuation capacity about the number of persons and when more than 2 exits are requested, over 50% of evacuation capacity must be satisfied even approaching to 1 exit is unable. Second, 2 ways of evacuation can be made smoothly by the stair or exit separation-distance standard regulation. Third, regulate the length limitation of dead-end corridor or passageway and it should give grades in limitation of whether the spring-cooler has been installed. Fourth, must secure the evacuation way and do the evacuee guidance when it's safety area and elevator or stair. Also needs to provide extra safety area to secure horizontal direction Escape Safety except fire escaping floor.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.2-3
• /
• 2015

This paper probes into safety leadership in construction and its impacts on site safety performance. A safety leadership model for construction is proposed. It contains two impacting paths of safety leadership, namely safety management and safety culture. By action research, safety improvement is achieved through leadership fulfillment on construction sites.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2012

The statistics of the safety accidents in labs show that the biggest reason for them is researchers' carelessness and insecure actions. In this way, the safety accidents in labs are affected a lot by researchers' safety consciousness. Therefore, in order to prevent the safety accidents in labs, this study aims at measuring the degree of researchers' safety consciousness, grasping the elements affecting their safety consciousness and suggesting the measures to improve the lacking safety consciousness. To accomplish this goal, a survey was conducted and analyzed on the safety consciousness of 1,226 researchers working at 10 government- supported research institutes in Daedeok R&D Complex. As a results, the measures to improve researchers' safety consciousness will be suggested as follows. First, in an environmental aspect, improvement of labs' environment exposed to danger, interest and participation of CEO, regular discussion on the safety in labs, installment of safety equipments in labs, and enlargement of individual labs are necessary. Second, in an educational aspect, the safety education offered by institutes need to be enhanced, experiential safety education fit for the characteristics of research should be applied, the time for safety education must be observed, and the communication among team members through the collective education in department units and safe culture through the campaigns to enhance safety consciousness have to be established. Third, in a systematic aspect, sanctions have to be imposed on the researchers who do not attend safety education, the number of safety supervisors and safety budget of labs should be increased, a safety certification system need to be introduced when a lab is built, the problems in safety have to be open to all departments and rewards for the persons of merit in labs should be extended.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.215-221
• /
• 2010

Many researches and projects are actively implemented in the academic world and industrial world in order to increase the productivity through changing utility layout. Effective layout makes the flow of parts and products go on wheels and helps labor forces and utilities to be used efficiently. In this study, we looked at effect on utility layout change through a case of a company making a fuel tank of vehicle in Korea. Due to the layout improvement, this company could have flowshop system on welding line, so the stock in line was decreased, checking the number of stock became easier than before and it was possible to evaluate exact cycle time per unit. Through not only confirming qualitative effect, but also checking quantitative effect such as UPH(Unit per Hour), we obtained the conclusion that the layout improvement increased the productivity.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.179-184
• /
• 2011

This study contain below two contents. First, this study analyse an effect of consciousness of the quality cost for quality cost activity. Second, this study analyse an effect of quality cost activity for productivity improvement. The empirical result of this study is meaning that quality cost consciousness effects productivity improvement by quality cost activity. Therefore, this paper emphasize consciousness of quality cost for productivity improvement.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.2
• /
• pp.85-94
• /
• 2005

The purpose of this study is to execute the investigation of injurious factors causing muscle-skeletal diseases at an automotive glass manufacturing company and, on the basis of the results, to enhance productivity by the improvement of working environment. By using an survey and an ergonomic evaluation method, symptoms of muscle-skeletal diseases of workers and working postures at each process were analyzed, and quantitative evaluation of muscle-skeletal disease risk against each process was performed. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. Suggested improvement plan was applied to the workplace step by step and it is confirmed that improvement plan not only removes the injurious factors of muscle-skeletal diseases but also is effective to enhance productivity.