• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2011

In this paper, a conceptual design process for Very Light Jet aircraft has been proposed incorporating aircraft safety certification. During the proposed design process, satisfaction of the airworthiness certification for an intermediate resulting aircraft configuration is evaluated and then redesigns are carried out if necessary and until the designed aircraft configuration satisfies the airworthiness requirements. Certification database has been developed using FAR 23, AC 23, KAS 23, and CS 23 as the airworthiness certification. Based on the developed certification database Design Certifcation Related Table has been produced to use the airworthiness requirements as design constraints in the propsed design process. Using Quality Function Deployment the design variables for a redesign are carefully selected and a design optimization is performed. To demonstrate the feasibility and effectiveness of rapid aircraft conceptual design using the proposed approach, a Very Light Jet design optimization including a redesign of wing flap has been performed and the design results have been presented.

• Journal of Environmental Health Sciences
• /
• v.47 no.3
• /
• pp.292-301
• /
• 2021

Objectives: Wearing medical masks has been recommended since the declaration of coronavirus disease-19 (COVID-19) as a pandemic disease. Certified medical masks are evaluated according to filtration efficiency and facial inhalation resistance. However, some people use non-certified common masks. This study aimed to evaluate various non-certified commercial masks based on the certification criteria for medical masks. Methods: Twenty mask products (three anti-droplet, three disposable dental, eight fashion, three cotton, and three children's masks) were selected. For performance evaluation, filtration efficiency and facial inhalation resistance tests were conducted. The evaluation method followed the certification method for KF-certified masks of the Ministry of Food and Drug Safety (MFDS) and the N95 respirator of the National Institute for Occupational Safety and Health (NIOSH). Results: None of the 20 masks met the KF94 certification standard set by the MFDS. Four and three masks respectively met the KF80 certification standard and the N95 standard of NIOSH. Filtration efficiency was significantly higher in three-layer masks than in single layer masks. Pleated-type masks had higher filtration efficiency than cone-type masks. There was no correlation between the structure of masks and facial inhalation resistance. Conclusion: While no masks complied with the KF94 certification standard, a few masks met the KF80 and the N95 certification standards of NIOSH. Although some people wear non-certified commercial masks, protection from aerosols is not guaranteed by such masks. Evaluation of the protection efficiency of non-certified mask against microbiological infection is needed for the prevention of infectious disease.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.47-53
• /
• 2022

A person who intends to become a maritime pilot shall have sea experience as a master, pass the apprentice pilot test and pilot test, and obtain a license from the Minister of Oceans and Fisheries. In Korea, the government limits the number of pilot licenses, considering the demand for pilotage. An inherent problem exist in the apprentice pilot test system as it conducts a relative evaluation based on test scores without an absolute evaluation standard. The purpose of this study is to identify problems of the current pilot test system and to suggest ways to improve the pilot certification system. In this study, the history of amendments of the pilot certification system in the Pilotage Act was investigated, and implications were derived by examining international standards for pilot certification, and a survey was conducted on 77 incumbent pilots. Consequently, a plan to improve the domestic apprentice pilot test and a step-by-step implementation plan for pilot certification system improvement were presented. The results of this study are expected to be utilized not only for the development of the government policy on pilot certification and for related academic basic data.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.93-98
• /
• 2021

In Europe, it is necessary to fulfil the type certification criteria by the European Aviation Safety Agency (EASA) when developing an aircraft engine. According to type certification criteria, a 150 hours endurance test should be performed to verify the stability of the engine structure under the engine's operating limit conditions. The type certification criteria for the 150 hour endurance test are specified in JAR-E, which is the EASA type certification. Currently, the Arriel 2L2 engine is being developed in cooperation with a foreign manufacturer, and a 150 hours endurance test was performed. In this study, a 150 hours endurance test procedure is conducted in consideration of the operation characteristics of the currently developed engine.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.41-46
• /
• 2005

The production, processing, sale and service of food materials are not subject to attainment via a single country. In accordance with internationalization of the world, issues related to food safety have emerged as critical international concerns and they are closely associated with the health and interest of domestic consumers, producers, manufacturers, and distributors. As a third party certification standards, ISO 22000 is in progress International Organization for Standardization(ISO) and the Draft International Standard(DIS) has already been presented on December 2004. The purpose of this study is to analyze the international standards, guidelines and legislation in regard of Food Safety Management System(FSMS) including ISO 9001, Hazard Analysis Critical Control Point(HACCP) and Product Liability(PL) so as to present Korean-model Food Safety Management System requirements and system establishment model.

• Journal of the Korean Society of Safety
• /
• v.34 no.2
• /
• pp.1-6
• /
• 2019

This study focuses on the evaluation of severity measures used for accidents associated with industrial machines and devices. In particular, duration of medical treatment, duration of work loss, number of deaths in an individual accident associated with industrial machines and devices are evaluated in various ways to assess the severity of the accident. The number of accidents with work loss of longer than 1 year as the severity measure and the number of accidents as the frequency measure appeared to be the most discriminating information and allow risk assessment based on these frequency and severity measures for grouping of industrial machines and devices. Results of such risk assessment further confirmed the re-classification of industrial machines and devices that are currently subject to safety certification (SC) and self-declaration of conformity (SDC) or selection of those machines and devices that are newly subject to SC and SDC.

• Food Science and Industry
• /
• v.54 no.2
• /
• pp.62-72
• /
• 2021

It is necessary to improve the self-management ability of Hazard Analysis Critical Control Point (HACCP) certified companies and intensive management for companies with insufficient management. In addition, the efficiency and convenience of HACCP operation should be improved by expanding and distributing smart HACCP. In this way, it is the direction that HACCP in Korea should go forward to continuously discover and expand the field of application with the improving and smartening the HACCP system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.106-112
• /
• 2021

In the early 1960s, US Air Force lost missile launch bases during ICBM development by a defect in the missile design and operation plan. U.S. DoD realized the limitation of the existing accident prevention method. Therefore, the weapon development required system safety activity, and procurement projects of U.S. DoD applied MIL-STD-882(System Safety). Development projects of U.S. DoD more emphasized the importance of system safety after the space shuttle Challenger exploded in 1986. Currently, Airworthiness certification for military aircraft uses system safety to minimize accidents. The domestic defense aviation R&D projects also use the system safety for the airworthiness certification. However, non-aviation weapon R&D projects rarely applied system safety. This paper presents a system safety application method for domestic weapon R&D projects by studying the U.S. military standards/organizations and domestic defense aviation projects.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.28-34
• /
• 2022

In 2021, Virgin Orbit converted a 747-400 aircraft into an air launch platform, and successfully launched it twice in February and July. Compared to the existing ground launch, interest in the air launch is increasing due to its great utility, such as its independence from the launch location or weather, cost reducing factor, shorter launch preparation time, and its benefit pursuant to altitude and speed. Additionally, as small satellites have similar performance to mid/large satellites in the past due to the miniaturization and precision of electronic equipment, small satellite launches are expected to dominate in the future. In this paper, institutional certification methods such as domestic, overseas, civilian and military airworthiness certification regulations/procedures are reviewed to ensure flight safety of aerial projectiles using large domestic civil aircraft, and applicable civil and military airworthiness certification technology standards are reviewed and analyzed. Additionally, we will review and suggest effective airworthiness certification application plans that reflect the reality, and present airworthiness certification standards (draft) for aerial launch vehicles, by analyzing applicable airworthiness certification technical standards when remodeling aerial launch vehicles.