• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.125-125
• /
• 2017

• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.83-90
• /
• 2020

재난·재해는 우리 사회의 인명과 재산에 막대한 피해를 주고 있으며, 국가적으로 해결해야 할 사회문제로서 인식되고 있다. 사물인터넷, 인공지능, 드론(무인기), 빅 데이터와 같은 4차 산업혁명 기술들은 과학·기술적 사회문제해결 도구로서 재난·안전산업 분야에도 흡수되면서 사회 전반에 영향을 미치고 있다. 국내 무인기 관련 29개 기관/기업은 재난치안 현장에서 운용 가능한 멀티콥터형 소형무인기 통합시스템 구축('17~'20)을 완료할 예정이다. 본 논문은 국가 재난대응 체계의 전략 자산으로서 재난치안용 무인기의 중장기적인 발전 방향을 고찰하고자 한다. 먼저, 재난안전 산업 및 정책 동향을 분석하고, 소형무인기 개발현황 및 향후계획, 부족기술 확보, 경쟁력 강화 방안 고찰을 통해 개발전략, 특화임무, 플랫폼, 통신, 관제, 운용 측면에서 재난치안용 무인기의 단계별 연구개발 방향을 제안한다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1140-1153
• /
• 2016

Since the inception of nuclear power as a commercial energy source, safety has been recognized as a prime consideration in the design, construction, operation, maintenance, and decommissioning of nuclear power plants. The release of radioactivity to the environment requires the failure of multiple safety systems and the breach of three physical barriers: fuel cladding, the reactor cooling system, and containment. In this study, nuclear reactor containment pressurization has been modeled in a large break-loss of coolant accident (LB-LOCA) by programming single-cell and multicell models in MATLAB. First, containment has been considered as a control volume (single-cell model). In addition, spray operation has been added to this model. In the second step, the single-cell model has been developed into a multicell model to consider the effects of the nodalization and spatial location of cells in the containment pressurization in comparison with the single-cell model. In the third step, the accident has been simulated using the CONTAIN 2.0 code. Finally, Bushehr nuclear power plant (BNPP) containment has been considered as a case study. The results of BNPP containment pressurization due to LB-LOCA have been compared between models, final safety analysis report, and CONTAIN code's results.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 춘계학술대회
• /
• pp.113-123
• /
• 2007

Through so that accident of semiconductor industry deduces unsafe factor of the person center on unsafe behaviour that incident history and questionnaire and I made starting point that extract very important factor. It served as a momentum that make up base that analyzes factors that happen based on factor that extract factor cause classification for the first factor, the second factor and the third factor and presents model of human error. Factor for whole defines factor component for human factor and to cause analysis 1 stage in human factor and step that wish to do access of problem and it do analysis cause of data of 1 step. Also, see significant difference that analyzes interrelation between leading persons about human mistake in semiconductor industry and connect interrelation of mistake by this. Continuously, dictionary road map to human error theoretical background to basis traditional accidental cause model and modern accident cause model and leading persons. I wish to present model and new model in semiconductor industry by backbone that leading persons of existing scholars who present model of existent human error deduce relation. Finally, I wish to deduce backbone of model of pre-suppression about accident leading person of the person center.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1842-1852
• /
• 2019

The AP1000 reactor coolant pump is a vertical shielded-mixed flow pump, is the most important coolant power supply and energy exchange equipment in nuclear reactor primary circuit system, whose steadystate and transient performance affect the safety of the whole nuclear island. Moreover, safety demonstration of reactor coolant pump is the most important step to judge whether it can be practiced, among which software simulation is the first step of theoretical verification. This paper mainly introduces the fluid-solid coupling simulation method applied to reactor coolant pump, studying the feasibility of simulation results based on workbench fluid-solid coupling technology. The study found that: for the unsteady calculations of the pure liquid media, the average head of the reactor coolant pump with bidirectional fluid-solid coupling decreases to a certain extent. And the coupling result is closer to the real experimental value. The large stress and deformation of rotor under different flow conditions are mainly distributed on impeller and idler, and the stress concentration mainly occurs at the junction of front cover plate and blade outlet. Among the factors that affect the dynamic stress change of rotor, the pressure load takes a dominant position.

• 한국수의병리학회지
• /
• 제1권2호
• /
• pp.91-96
• /
• 1997

General steps in the discovery and development of novel drugs in the United States are presented. The first step is the discovery of novel drugs. Brief histories and mechanisms of a few novel drugs in the American market are outlined. In this presentation preclinical animal toxicologic studies (drug safety evaluateion) are emphasized in regard to drug development. When preclinical animal studies have defined the toxicity and the doses at which it occurs an Investigational new Drug Application (IND) is submitted to the Food and Drug Administration (FDA) An IND notifies the FDA the intention to begin testing a novel drug in human subjects.

• 로봇학회논문지
• /
• 제15권3호
• /
• pp.256-268
• /
• 2020

This study is about a design method for deriving task safety scenarios for the application of collaborative robots. A five-step process for deriving task safety scenarios for collaborative robots has been proposed, which focuses on the type of collaboration between human and collaborative robot. The three types of collaboration were classified according to the collaboration workspace and the worktime of human and collaborative robot. Based on these three types of collaboration, task safety scenarios include scenarios that predict risk from unintended use during work. Collaboration with collaborative robot is a human-centered process because human actions can create dangerous situations. Besides, we improved the understanding of this design methodology by presenting examples of the application of task safety scenarios according to the process for each type of collaboration.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.365-376
• /
• 2010

This paper summarizes the results of a Writing Group on the Extension of CFD codes to two-phase flow safety problems, which was created by the Group for Analysis and Management of Accidents of the Nuclear Energy Agency' Committee on the Safety of Nuclear Installations (NEA-CSNI). Two-phase CFD used for safety investigations may predict small scale flow processes, which are not seen by system thermalhydraulic codes. However, the two-phase CFD models are not as mature as those in the single phase CFD and potential users need some guidance for proper application. In this paper, a classification of various modelling approaches is proposed. Then, a general multi-step methodology for using two-phase-CFD is explained, including a preliminary identification of flow processes, a model selection, and a verification and validation process. A list of 26 nuclear reactor safety issues that could benefit from investigations at the CFD scale is identified. Then, a few issues are analyzed in more detail, and a preliminary state-of-the-art is proposed and the remaining gaps in the existing approaches are identified. Finally, guidelines for users are proposed.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.110-117
• /
• 2011

The paper tries to understand the other side of characteristics on occupational injuries and diseases in forestry. Occupational injuries and diseases in forestry seems to be greatly influenced by the environmental characteristics of the mountain district and individual's ability of workers. A traditional method on the analysis of occupational injuries and diseases data may show that the main cause of occupational injuries and diseases is the material factors significantly. To identify the other side of occupational injuries and diseases in forestry, the occupational injuries and diseases data of 3,091 workers in forestry was analyzed. The data in forestry, 2009 shows certain characteristics among the recent occupational injuries and diseases data. The first step is to classify the data according to standard of classification of original cause materials. Material factors are 72.3% and human factors (included managerial factors) and environmental factors are 27.0%. The next step is to reclassify the first step data by using the concept of influence factors which caused and influenced occupational injuries and diseases. The result is that material factors are 2.4%, human factors(included managerial factors) and environmental factors are 97.0%. Also, an aging degree of workers in forestry is higher than other categories of business. It is true that an aging degree of injured or diseased workers in forestry is higher than that of other categories of business. However, relevance with increase of occupational injuries and diseases could not be explained. An injury and disease rate in forestry is remarkably increased recently than other categories of business. One of the reason why an injury and disease rate increased remarkably in 2009 could be considered as the increase of the number of workers and related budget. Therefore, this study proposes important measures or means to prevent occupational injuries and diseases in forestry.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.846-857
• /
• 2019

Voltage step-down converters are very popular in distributed power systems, voltage regular modules, electric vehicles, etc. However, a high step-down voltage ratio is required in many applications to prevent the traditional buck converter from operating at extreme duty cycles. In this paper, a series capacitor interleaved buck converter with a soft switching technique is proposed. The DC voltage ratio of the proposed converter is half that of the traditional buck converter and the voltage stress across the one main switch and the diodes is reduced. Moreover, by paralleling the series connected auxiliary switch and the auxiliary inductor with the main inductor, zero voltage transition (ZVT) of the main switches can be obtained without increasing the voltage or current stress of the main power switches. In addition, zero current turned-on and zero current switching (ZCS) of the auxiliary switches can be achieved. Furthermore, owing to the presence of the auxiliary inductor, the turned-off rate of the output diodes can be limited and the reverse-recovery switching losses of the diodes can be reduced. Thus, the efficiency of the proposed converter can be improved. The DC voltage gain ratio, soft switching conditions and a design guideline for the critical parameters are given in this paper. A loss analysis of the proposed converter is shown to demonstrate its advantages over traditional converter topologies. Finally, experimental results obtained from a 100V/10V prototype are presented to verify the analysis of the proposed converter.