• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.3-11
• /
• 2009

The increased demand and consumption of coal has intensified problems associated with disposal of solid waste generated in utilization of coal. Major utilization of coal by-products has been in construction-related applications. Since fly ash accounts for the part of the production of utility waste, the majority of scientific investigations have focused on its utilization in a multitude of use, while little attention has been directed to the use of bottom ash. As a consequence of this neglect, a large amount of bottom ash has been stockpiled. However, the need to obtain safe and economical solution for its proper utilization has been more urgent. The study presented herein is designed to ascertain the performance characteristics of bottom ash, as autoclaved lightweight foamed concrete product. The laboratory test results indicated that tobermorite was generated when bottom ash was used as materials for hydro-thermal reaction. According to the analysis of variance, at the fresh state, water ratio affects on flow and slurry density of autoclaved lightweight foamed concrete, but foam ratio influences on slurry density, while, at the hardened state, foam ratio affects on the density of dry and the compressive strength but doesn't affect on flexural and tensile strength. In the results of response surface analysis, to obtain target performance, the most suitable mix condition for lightweight foamed concrete using bottom ash was water ratio of 70$\sim$80% and foaming ratio of 90$\sim$100%.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.39-48
• /
• 2011

In this paper the method of estimating the bearing capacity of shallow foundation on a finite layer of sandy ground underlain by a rigid base was proposed by assessing results of the model test and the numerical analyses. For model experiments, the centrifuge tests under 1g and 20 g of gravitational levels were performed with sandy soils sampled from the field, changing the relative density of sandy soil and the ratio of thickness of sand layer (H) to the width of strip footing (B). As results of tests, bearing capacity tends to increase with the value of H/B while settlement for a given load intensity decreases. Bearing capacity also increases with relative density of the soil. In order to propose the method of estimating the bearing capacity of thin sandy layer underlain by a rigid base, values of bearing capacity factors from test results were compared with the values of modified bearing capacity factor by Mandel & Salencon (1972) considering the effect of H/B value on bearing capacity. The relation of bearing capacity factor ratio, normalizing friction angle of sandy soil, with the value of H/B was suggested so that this relation could be applied to design in the safe side. The results of numerical analyses obrained by changing the layout of footing, relative density of sandy soil and the value of H/B, were in good agreements with the suggested relation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.417-422
• /
• 2016

Aids to Navigation (AtoN) are marine traffic facilities to improve the safety and efficiency of shipping. "New Dangers" should be appropriately marked using lateral, cardinal or isolated danger marks or by using an Emergency Wreck Marking Buoy. However, Emergency Wreck Marking Buoys are difficult to implement in terms of speed and accuracy of installation. In the case of sinking accidents, it is often difficult to immediately install an Emergency Wreck Marking Buoy because of weather conditions, the marine environment or accident positioning. This study concerns Auto-Releasing Emergency Wreck Marking Buoys, which should be installed in all vessel for safe marine navigation and efficient maritime transport with reference to the Maritime Buoyage System (MBS). Auto-Releasing Emergency Wreck Marking Buoys include an auto-release unit, auto reel chain and auto lighting lantern. These buoys can be automatically released from the deck of a vessel and will float in the water for quick installation at the scene of an accident, even in the case of sinking accidents. Auto-Releasing New Mark Buoys are expected to reduce to installation process, prevent secondary accidents by the risk of navigation and be search and rescue rapidly.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.149-155
• /
• 2020

The Korea Highway Traffic Authority provides statistics that analyze the causes of traffic accidents that occurred since 2015 using the Traffic Accident Analysis System (TAAS). it was reported Through TAAS that the driver's forward carelessness was the main cause of traffic accidents in 2018. As statistics on the cause of traffic accidents, 51.2 percent used mobile phones and watched DMB while driving, 14 percent did not secure safe distance, and 3.6 percent violated their duty to protect pedestrians, representing a total of 68.8 percent. In this paper, we propose a system that has improved the advanced driver assistance system ADAS (Advanced Driver Assistance Systems) by utilizing CNN (Convolutional Neural Network) among the algorithms of Deep Learning. The proposed system learns a model that classifies the movement of the driver's face and eyes using Conv2D techniques which are mainly used for Image processing, while recognizing and detecting objects around the vehicle with cameras attached to the front of the vehicle to recognize the driving environment. Then, using the learned visual steering model and driving environment data, the hazard is classified and detected in three stages, depending on the driver's view and driving environment to assist the driver with the forward and blind spots.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.4 no.4
• /
• pp.43-61
• /
• 1981

Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.12-25
• /
• 2017

In local underground mines heavily depending on the natural ventilation, ducted fan auxiliary ventilation system is strongly recommended instead of the total mine ventilation system requiring large capital and operating costs. Optimizing the installation of ducted fans in series in long large-opening mines is required to assure the economy and efficiency of the ventilation system. The two most critical design parameters for optimization are the wall separation distance and gap length between adjoining ducts. This study aims at deriving the optimal values for those two parameters concerning the economic and environmental aspects through the extensive CFD analysis, which minimizes pressure loss, leakage and entrainment of the contaminated air in the gap space. The ranges of the wall separation distance and gap length for study are selected by taking into consideration the existing recommendations and guidelines. The ultimate goal is to optimize the auxiliary ventilation system using ducted fans in series to provide a reliable and efficient solution to maintain clean and safe workplace environment in local long underground mines.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.487-496
• /
• 2020

For the purpose of next generation technology for robot perfomances, a RAoRA (Robot Actor on Robot Arm) structure was proposed using a robot arm joined with a humanoid robot actor. Mechanical analysis, machine design and fabrication were performed for motions combined with the robot arm and the humanoid robot actor. Kinematical analysis for 3D model, spline interpolation of positions, motion control algorithm and control devices were developed for movements of the robot actor. Preliminary visualization, simulation tools and integrated operation of consoles were constructed for the non-professionals to produce intuitive and safe contents. Air walk was applied to test the developed platform. The air walk is a natural walk close to a floor or slow ascension to the air. The RAoRA also executed a performance with 5 minute-running time. Finally, the proposed platform of robot performance presented intensive and live motions which was impossible in conventional robot performances.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.962-968
• /
• 2013

Problem of greenhouse gases associated with global warming and the world rise in fuel oil prices due to the depletion of fossil fuel has attracted attention. For this reason, maritime transport business, has shown interest in green-ship technology to reduce the consumption of fuel and reduce greenhouse gas for environmental protection. Power system of the ship is one of the most important factors for safe operation. Therefore, at design of ship power system, most of existing vessel used comparative large capacity generator in order to respond peak load such as bow thruster, crane and etc. In the navigation of ship, marine generators most would be operated at low load operation. In the low load operation of the generation rate of 50% or less, the operation efficiency of the generator it deteriorated, to consume more fuel oil. It also, it means that adversely effect the life of the generator. In this paper, studied how to apply for a secondary battery in container ship that relatively frequent arrival and departure in port. As a result, in order to apply the secondary battery to increase the operating efficiency of the generator during the voyage, it was confirmed that it is possible to reduce fuel consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.536-543
• /
• 2016

The installation of grounding systems is important for the safe operation of power systems, and the soil resistivity is an important design consideration for such systems. It varies markedly with the soil type, moisture content and temperature. The Jeju geological structure is formed in a multi-layered structure characteristic of volcanic areas and, and the geological ground resistance values can appear even constructed the same areas ground system different from the soil structure. In this study, a mock-up system using representative soil from Jeju was constructed to analyze the variation of the grounding resistance. The mock-up system was configured using the Gauss-Newton algorithm inversion method to analyze the model numerically using the Wenner method through the soil resistivity measurements used to create the ground model. Also, we analyzed the change in the general ground resistance characteristics of the copper rod, copper pipe, and carbon rod that are used for grounding. The variation of the grounding resistance with the hydration status was found to be $2.9[{\Omega}]$, $16.5[{\Omega}]$ and $20.1[{\Omega}]$ for the copper rod, copper pipes, and carbon rod, respectively, and the influence of the ground moisture resistance of the carbon rod was found to be the lowest with a value of $141[{\Omega}]$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.324-329
• /
• 2020

The emergency evacuation support system provides a safe means of evacuation by preventing the inflow of smoke through the formation of a smoke shield curtain in fire situations and pressurizing fresh air to the inside of the smoke shield curtain. In this study, numerical analysis was performed to examine the effects of the hole size on the flow inside the smoke curtain. As the air supply size decreased, the flow rate through the air supply was formed relatively uniformly from the inlet to the outlet length of the emergency support system. In addition, the size of the air supply hole was more than 20 mm, the flow rate was very low near the outlet, so the air supply hole size should be smaller than 20 mm. In addition, the minor loss of the air supply hole was calculated to be K = 1.5 from the numerical results. Therefore, the proper design of an emergency evacuation support system is possible using the flow characteristics according to the size and minor loss of the air supply hole.