• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.25-29
• /
• 2016

High charge state electron cyclotron resonance (ECR) ion source is important on the performance of heavy ion accelerators. In this paper, a low temperature superconductor (LTS) was used to make a hexapole coil for an 18-GHz ECR ion source. Several hexapole structures, including racetrack, graded racetrack, and saddle were implemented and analyzed for the hexapole-in-solenoid ECR ion source system. Under the appropriate radial confinement field, the smaller outer radius of hexapole can be better for the solenoid design. Saddle hexapole was selected by comparing the wire length, maximum outer radius of the hexapole, the Lorentz force at the end part of the hexapole and the maximum magnetic field in the coil. Based on saddle hexapole, a new design for hexapoles, the snake hexapole, was developed in this paper. By comparative analysis of the Lorentz force at the end part of the saddle and snake hexapoles, the snake hexapole is much better in the ECR ion source system. The suggested design for the ECR ion source with the snake hexapole is presented in this paper.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.745-751
• /
• 2021

The International Maritime Organization(IMO) has established Emission Control Areas(ECA) in the Baltic Sea, North Sea, and sea areas in the United States since 2012, and encourages the use of clean fuels such as Natural Gas(NG). To keep pace with the increase in international demand for LNG bunkering vessels, research for the localization of key equipment for LNG bunkering must also be performed in Korea. For research and development of core bunkering equipment and systems, in this study, heat transfer analysis and structural analysis were performed by modeling the saddle, which must first be secured structurally by directly receiving the load of the hose. As a result, the suitability of the model was reviewed by analyzing the temperature distribution and stress level through the analysis results of this study.

• Wind and Structures
• /
• 제36권2호
• /
• pp.133-147
• /
• 2023

The random vibration of saddle membrane structures under wind load is studied theoretically and experimentally. First, the nonlinear random vibration differential equations of saddle membrane structures under wind loads are established based on von Karman's large deflection theory, thin shell theory and potential flow theory. The probabilistic density function (PDF) and its corresponding statistical parameters of the displacement response of membrane structure are obtained by using the diffusion process theory and the Fokker Planck Kolmogorov equation method (FPK) to solve the equation. Furthermore, a wind tunnel test is carried out to obtain the displacement time history data of the test model under wind load, and the statistical characteristics of the displacement time history of the prototype model are obtained by similarity theory and probability statistics method. Finally, the rationality of the theoretical model is verified by comparing the experimental model with the theoretical model. The results show that the theoretical model agrees with the experimental model, and the random vibration response can be effectively reduced by increasing the initial pretension force and the rise-span ratio within a certain range. The research methods can provide a theoretical reference for the random vibration of the membrane structure, and also be the foundation of structural reliability of membrane structure based on wind-induced response.

• 박물관보존과학
• /
• 제1권
• /
• pp.75-86
• /
• 1999

국립김해박물관 개관전시를 위해 일제시대 창녕 교통 제 89호분에서 출토된 금동제안교장식(金銅製鞍橋裝飾 이하 "안교장식")을 보존처리하였다. 안교장식은 수많은 편으로 파손된 채 다른 유물과 뒤섞여 보관되어 왔다. 보존처리는 유물의 원형을 되찾고 재질을 안정화시키는 점에 두고 과학적인 조사와 처리를 실행하는 한편 유물의 제작기법도 상세히 조사할 수 있었다. 그 결과 안교장식의 두꺼운 부식생성물을 벗기고 파편을 접착하여 원래 모습으로 복원하게 되었고 전시와 관리도 가능하게 조치하였다. 또한 다양한 고대 제작기법이 적용된 안교장식임을 확인할 수 있었다.

• 대한전자공학회논문지SD
• /
• 제47권3호
• /
• pp.1-6
• /
• 2010

Saddle MOSFET의 모서리의 효과에 대한 고전역학과 양자역학적 시뮬레이션의 비교분석을 3차원 수치 시뮬레이터를 사용하여 수행하였다. 비교분석 결과 양자역학적 시뮬레이션에서는 실리콘 핀의 단면에서의 정확한 최대 전자 밀도의 위치와 크기를 제공함으로써 소자의 정확한 설명을 제공하는 것을 보여 주었고, 이를 이용하여 모서리 효과 및 그것이 소자의 문턱전압의 특성을 미치는 영향의 정확한 분석이 실행되었다. 또한, 모서리 효과를 억제하기 위해서 실리콘 핀의 모서리를 둥글게 하거나 구석의 바디도핑을 낮추는 두 가지 가능한 기법을 제시했다.

• 한국자기학회지
• /
• 제20권2호
• /
• pp.75-82
• /
• 2010

나노구조 교환결합 삼층박막의 열적안정성을 예측하기 위한 최근의 연구진전에 대하여 리뷰한다. 새로운 해석적/수치적 방법을 이용하여 나노구조 교환결합 삼층박막의 에너지 배리어, 나아가서 열적안정성을 예측한다. 이 방법의 특징은 수치적인 방법을 이용하여 얻은 magnetostatic 자기장을 포함하는 해석적인 전체 에너지 방정식을 이용함에 있다. 단자구라는 가정하에, 모든 magnetostatic 자기장은 자성층 전체 부피에 대해 그 값을 평균함으로써 유효 값을 취할 수 있다. 그러나, 평형상태에서는 자구의 구조가 복잡하며, 또한 불안정한 saddle point에서의 자구 구조를 알 수 있는 직접적인 방법이 없기 때문에, saddle point에서의 magnetostatic 자기장 역시 얻을 수 없다. 이러한 어려움은 micromagnetic simulation을 통해 얻을 수 있는 critical 자기장과 saddle point에서의 magnetostatic 자기장을 연결하는 방정식을 사용함으로써 극복되었다. 이 방법은 신뢰성이 확보된 micromagnetic simulation에 기반을 두고 있기 때문에 열적안정성을 정확하게 예측하는 것이 가능하다.

• Physical Therapy Rehabilitation Science
• /
• 제3권2호
• /
• pp.101-106
• /
• 2014

Objective: To investigate the appropriate position for abdominal drawing-in maneuver (ADIM) exercise by rehabilitative ultrasound image. Design: Cross-sectional study. Methods: Twenty-eight young adults with no history of low back pain participated in the study. Three positions compared were crook lying position with hip $60^{\circ}$ flexion, standing position with the feet hip width apart and knees straight, and saddle standing positionunsupported with the knees $20^{\circ}$ flexed. Once in the appropriate position, the subjects were verbally cued to draw in their abdominal wall, with the intention of pulling their navel inward toward their lower back. The thickness of each transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) muscles were measured via ultrasound and recorded at the end of inspiration. Results: When compared to the TrA thickness of rest, the TrA thickness was significantly increased in all three positions (crook lying, standing, and saddle standing) during the ADIM (p<0.05). IO thickness was significantly greater in standing and saddle standing than in crook lying (p<0.05). EO thickness was constant in all the three positions. Conclusions: The present study suggests that standing and saddle standing positions could be recommended for the ADIM to maximize recruitment of the TrA and IO activation. Specifically, the saddle standing position with knees flexed to $20^{\circ}$ was observed to increase the TrA activation more than the standing position. These findings should be considered when core stability exercises such as the ADIM are conducted.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.55-60
• /
• 2007

The electro-acoustic guitar pickup converts the vibration of strings to the electric signals, and delivers them to an amplifier. The vibration of the strings is transferred to the piezoelectric material through the saddle. This paper aims to improve sound quality for electro-acoustic guitars through the finite element analysis of the saddle. Firstly, the conventional pickup is modeled and analyzed with a commercial program called ANSYS. It is obvious that there exists interference phenomenon of stress. A structural modification of the pickup is performed, based on the beam theory. The modified structure is modeled and analyzed. Finally, the fabricated structures are subjected to the measurements and compared with the conventional pickup. It can be concluded that the interference with the modified structure is much less than that with the conventional structure, and that the sound quality is improved with the modified structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.853-861
• /
• 2007

To understand the concept of dynamic motion in two degree nonlinear coupled system, free vibration not including damping and excitation is investigated with the concept of nonlinear normal mode. Stability analysis of a coupled system is conducted, and the theoretical analysis performed for the bifurcation phenomenon in the system. Bifurcation point is estimated using harmonic balance method. When the bifurcation occurs, the saddle point is always found on Poincare's map. Nonlinear phenomenon result in amplitude modulation near the saddle point and the internal resonance in the system making continuous interchange of energy. If the bifurcation in the normal mode is local, the motion remains stable for a long time even when the total energy is increased in the system. On the other hand, if the bifurcation is global, the motion in the normal mode disappears into the chaos range as the range becomes gradually large.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.603-616
• /
• 1995

Presented in this paper is an algorithm to obtain the intersections of a polyhedral surface composed of triangle facets with a series of parallel planes for extracting machining information from the surface. The change of the topology of the intersection curves is caused by characteristic points of the surface when sectioning the surface with parallel planes. The characteristic points are internal maximum, internal minimum, internal saddle, boundary maximum, boundary minimum, boundary max-saddle, and boundary min-saddle points. The starting points of the intersects are found efficiently and robustly using the characteristic points. The characteristic points as well as the intersection contours can be used to evaluate the machining information for process planning, and to generate NC tool path in CAD/CAM system.