• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.138-145
• /
• 2015

In this paper, a novel static overmodulation scheme (OVM) for space-vector PWM (SVPWM) is proposed. The proposed static OVM scheme uses the concept of adding offset voltages in linear region as well as overmodulation region to fully utilize DC-link voltage. By employing zero sequence voltage injection, the proposed scheme reduces procedures for achieving SVPWM such as complicated gating time calculation. In addition, this paper proposes a stepwise discontinuous angle movement in high modulation region in order to reduce Total Harmonic Distortion (THD). The validity of the proposed scheme is verified through theoretical analysis and experimental results.

• 산업기술연구
• /
• 제21권B호
• /
• pp.59-66
• /
• 2001

In this paper, a novel overmodulation strategy for PWM inverters to extend linearity region is presented. The proposed strategy uses the concept of space-vector PWM(SVPWM) based on the zero sequence signal(offset voltage) injection principle. So, by modifying the pole voltage simply, the linear control of inverter output voltage over the whole overmodulation range can be achieved easily. The proposed strategy is so simple that its practical implementation is easy. The validity of the proposed strategy is confirmed by the experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.5-8
• /
• 1998

The adaptation to vector control theory is so generalized that it is widely used for implementing the high-performance of AC machine. Nowadays, One-Chip microprocessors or DSP chips are being well-used to implement Vector Control algorithm. DSP Chip have less flexibility for memory decoding and I/O rather than One-Chip microprocessor so that is requires more additional circuit and high cost. And the past One-Chip micro processors have difficult of implementation the complex algorithm because of small memory capacity and low arithmetic performance. Therefore we implemented the vector control algorithm of PMSM(Permanent Magnetic Synchronous Motors) using 80296SA form intel , which have many features as 6M memory space, 500MHz clock frequency, including memory decoding circuit and general I/O, Special I/O(EPA, Interrupt controller, Timer/Count, PWM generator) which is proper controller for the complex algorithm or operation program requiring so much memory capacity, So in this paper we fully digitized the vector control of PMSM included SVPWM Voltage controller using the intel 80296SA

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.468-476
• /
• 2010

This paper proposes and develops a new direct voltage control (DVC) approach. This method is designed to be applied in various applications for AC drives fed with a three-phase voltage source inverter (VSI) working with a constant switching time interval as in the standard direct torque control (DTC) scheme. Based on a very strong min(max) criterion dedicated to selecting the inverter voltage vector, the developed DVC scheme allows the generation of accurate voltage forms of waves. The DVC algorithm is implemented on a dSPACE DS1104 controller board and then compared with the space vector pulse width modulation technique (SVPWM) in an open loop AC drive circuit. To demonstrate the efficiency of the developed algorithm in real time and in closed loop AC drive applications, a scalar control scheme for induction motors is successfully implemented and experimentally studied. Practical results prove the excellent performance of the proposed control approach.

• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.543-549
• /
• 2005

본 논문에서는 캐리어(Carrier)를 이용한 매트릭스 컨버터(Matrix Converter)의 전압 변조 방법을 제안한다. 출력상전압에 적절한 옵셋(Offset) 전압을 더하고, 캐리어 파형의 기울기를 적절히 제어함으로써 입력 전류를 역율 1의 정현파로 제어하면서 동시에 출력 전압의 합성이 가능하다. 이 방법은 기존의 매트릭스 컨버터 전압 변조 방법인 SVPWM과 동일한 스위칭 패턴을 나타내지만, 그 구현은 훨씬 간단한다. 또한 기존의 전압형 인버터(Voltage Source Inverter, VSI)에서 발전된 2상/3상 변조, 과변조(Over Modulation) 등의 개념을 유사하게 적용할 수 있어 그 활용도가 매우 논다. Matlab/Simulink를 이용한 시뮬레이션 결과와 실험을 통해 제안된 방법의 타당성을 검증하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.675-682
• /
• 2000

An easier implementation method of the field oriented control of induction machine using Matlab/Simulink and dSpace board is proposed in this paper. The total system for the control of induction motor is modeled with the help of Matlab/Simulink. These models consist of induction motor block, SVPWM inverter block and control algorithm block, etc. And this system is simultaneously simulated and experimented in Matlab/Simulink environment with dSpace borad (DS1102). It is possible that Matlab and dSpace board compiler can make $^'{\ast}.c'\;and\;^'{\ast}.obj'$ file of models designed in Matlab/Simulink environment automatically. Both Simulation and experimental results are given.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.400-402
• /
• 2007

This paper presents a vector control implementation for PMSM using Real Time Workshop and Embedded Target for TI C2000 DSP in MATLAB/SIMULINK. Speed, current and vector controllers are easily designed and implemented by using the MATLAB/SIMULINK program. Feedback of motor speed is processed through C28x QEP(Quadrature Encoder Pulse) block from encoder pulse. 3-Phase currents ares processed through C28x ADC block from current sensors. And gating signal of PWM inverter is generated through SVPWM and PWM block. Real-time program is drawn using SIMULINK and then converted program code for speed control of PMSM is downloaded into the TI eZdsp 2812 board. Experiments were carried out to examine validity of the proposed vector control implementation.

• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.66-74
• /
• 2005

최근 급속도로 발전되고 있는 산업분야에서 서보시스템은 빠른 응답특성과 고도의 정밀성이 요구되고 있다. 이러한 특성의 요구로 인하여 산업용 서보전동기 구동시스템에 고정자 혹은 회전자 자속벡터의 순시위치와 고정자 전류를 검출하여 좌표변환에 의해 고정자 전류를 여자성분과 토크성분으로 분리 제어하는 벡터제어 이론이 많이 적용되고 있다. 벡터제어에서는 좌표변환과 SVPWM 발생을 위해 많은 연산을 요구하므로 디지털 제어시스템에서 DSP에 많은 부담을 주고 있다. 그러나 직접토크제어(DTC) 알고리즘은 디지털 제어 구조로 토크와 고정자 자속 성분의 전류제어에 룩업 테이블을 사용하므로 벡터제어처럼 많은 제어기와 복잡한 연산을 필요로 하지 않고, 동적 응답특성이 전동기의 정수변화에 영향이 적으면서 직접 전동기의 토크와 고정자 자속을 독립적으로 제어할 수 있는 장점을 가진다. 따라서 본 논문에서는 표면 부착형 영구자석 동기전동기(SPMSM)를 사용하여 DTC에 의한 서보 전동기 제어와 벡터제어에 의한 서보 제어시스템 결과를 비교하여 직접토크제어 알고리즘의 산업용 서보 시스템으로의 적용 가능성을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.265-268
• /
• 2004

교류 전동기의 전류 제어 특성은 전동기의 재정 수의 특성, 전류 제어기의 구성 및 제어 주기, PWM기법 및 주파수에 의해 달라지며, 시스템의 동적 특성 및 효율에도 큰 영향을 미친다. 본 논문은 PMSM(Permanent magnet synchronous motor)의 동기좌표계에서 벡터 제어 시 전류 제어 특성을 분석할 수 있는 실제와 동일한 디지털 전류 제어기 및 SVPWM(Space Vector PW)을 포함한 시뮬레이터를 구현하였으며 고속 및 일반 PMSM을 대상으로 시뮬레이션을 수행하여 그 결과 전류 제어 특성의 예측 가능함을 보였다.

• 전력전자학회논문지
• /
• 제17권2호
• /
• pp.129-134
• /
• 2012

In this paper, a new simple PWM method for Vienna rectifier is proposed. The previous SVPWM method for Vienna rectifier is very complex and difficult to implement. To solve these problems, a new single-carrier comparison PWM method for voltage control of Vienna rectifier is proposed. Because of using the only single carrier, implementation of the proposed PWM is very simple. In the proposed PWM method, carrier comparison parts of the PWM block is only changed from the 2 level PWM control block. The usefulness of the proposed PWM method is verified by the simulation and experiment.