• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.16-19
• /
• 2006

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR characteristic of self-assembled 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto $pre-treatment(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1 mM/1 solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a 0.1 ${\mu}M/l$ solution of 4.4'-di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2,$ and finally blown dry with N_2. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2 V to +2 V with 298 K temperature. The vacuum condition was $6{\time}10^{-8}$ Torr. As a result, we found the NDR voltage of the 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate were $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ V(positive region). respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.278-286
• /
• 2008

This paper investigates the fault generation type and the cause of output interruptionsin bulky with $30^{\sim}500[KVA]$ double conversion UPS, and proposes the fault detection method to improve the reliability of power supply used in the critical load in industry. Identifies its existing way of detecting a quality of inverter output it to bypass when exceeds its expectation. Under a UPS managing system, when an inner (Power device, Controller, CPU) fault occurs it disrupts the power supply and these occurrences has been verified by the results of experiments and application results. To overcome these problems, the proposed method constructs independently a fault-detection, a bypass-control device and a triple power supply apart from the conventional UPS operation. Also the detection point is changed to the preceding of a circuit breaker, a reference of fault detection is modified to avoid any clash and the breaking equipment is attached to intercept a spread of accident. As a result of applications of these developed systems to 242 UPS which was installed purposefully to the communication power supply, the service errors has not occurred in the UPS for two years since 2006.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1844-1846
• /
• 2005

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR property of self-assembled 4,4- Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment$(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/l$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2V to +2V with 299K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found the NDR voltage of the nitro-benzene is $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ (positive region), respectively.

• The Journal of Korean Physical Therapy
• /
• v.26 no.6
• /
• pp.449-452
• /
• 2014

Purpose: The purpose of this study was to analyze the coordination between trunk flexion and lower limb extension contributing to vertical propulsion during sit-to-stand (STS) at different chair heights in the elderly. Methods: Ten elderly subjects were asked to stand up at their natural speed from different chair heights : (1) $90^{\circ}$ knee flexion; (2) $100^{\circ}$ knee flexion; (3) $110^{\circ}$ knee flexion; and (4) $120^{\circ}$ knee flexion. A standard chair without a backrest or armrests was used in this study. To remove inertial effects of upper limb movements, subjects were asked to stand up from a chair with their arms crossed at the chest. Mean of results of three trials were used in the analysis at different knee flexion angles. Distances moved by the shoulder for compensatory trunk movement was recorded by motion analysis and vertical force was recorded under foot using force plates. Distances moved by the shoulder and vertical ground reaction force measurements were analyzed using repeated ANOVA. Results: Distances moved by the shoulder significantly decreased with higher chair (p<0.05). Vertical forces were not significant difference on chair heights (p>0.05), but results of pairwise comparisons for vertical force revealed significant difference between $90^{\circ}$ knee flexion and $120^{\circ}$ knee flexion (p<0.05). Conclusion: Trunk movement is probably used as a compensatory mechanism at low chair heights to increase lift-off from sitting by the elderly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.387-387
• /
• 2010

식품산업 및 가정의 주방에 이르기까지 다양한 분야에서 식품을 가공 조리하는 곳에는 보건 건강을 위하여 비닐장갑은 반드시 필요하다. 최근에는 다양한 소재를 이용하여 위생 비닐장갑을 개발을 하고 있으나 일회용성으로 저가의 물품으로 인식되어 생활에 중요성에 비해 개발이 미흡한 실정이다. 위생 비닐장갑은 다양한 산업에서 필수품으로 활용되고 있는 만큼 위생적이고 내구성이 높은 제품의 개발이 절실히 요구되는 실정이다. 이에 본 연구에서는 봉합면의 측면이 사용중 터지지 않도록 하기 위하여 봉합선의 폭을 기존의 0.1 mm 대신에 1 mm정도로 넓게 하는 기술과 무균성 위생 비닐장갑의 제조 공정 자동화에 주력함으로써, 고품위 무균성 위생비닐장갑을 열공정 안정화 자동화 공정으로 제작코자 하였다. 본 연구의 수행시 당면한 가장 큰 문제점은 봉합선의 폭이 넓어짐에 따라서 knife 형태를 갖는 가열된 금형의 칼날이 비닐과 접촉되어 실링을 하는 단계에서 금형에 비닐이 녹아서 붙어버리는 sticking 현상이 발생하였다. 이는 현장에서 심각한 문제로 더 이상 상용화가 불가능함을 의미한다. 이에 본 연구에서는 금형(die) 재료로 2가지의 서로 다른 소재를 선택해서 상온 상압플라즈마 처리를 함으로써 금형과 비닐사이에 발생하던 sticking 문제를 해결하고자 하였다. 금형으로 사용한 소재는 스테인리스(STS304)와 공구강(SCM)을 사용하였다. 두 시편에 대하여 상온상압 플라즈마 처리를 수행한 뒤 증류수와 Diiodomethane를 이용하여 접촉각과 표면에너지를 측정하였다. 상온 상압플라즈마 처리 시간은 0 ~ 9초로 하였다. 스테인리스의 경우 접촉각이 증류수를 이용하였을 때 $69.7^{\circ}$, $32.2^{\circ}$, $16.7^{\circ}$였으며 Diiodomethane을 이용하였을 때는 $37.3^{\circ}$, $17.6^{\circ}$, $10.6^{\circ}$였다. 표면에너지(surface energy)의 경우 48.13 mN/m, 72.06 mN/m, 78.66 mN/m로 플라즈마 처리시간이 길어질수록 표면 에너지 값이 증가하였다. 공구강의 경우는 증류수를 이용하였을 때 접촉각이 $70.2^{\circ}$, $36.8^{\circ}$, $28.9^{\circ}$였으며 Diiodomethane를 이용하였을 때는 $38.65^{\circ}$, $22.8^{\circ}$, $20.2^{\circ}$였다. 표면에너지의 경우 47.43 mN/m, 69 mN/m, 73.15 mN/m로 스테인리스와 같이 표면에너지 값이 커지는 것을 확인할 수 있었다. 학술대회에서는 금형의 표면에너지를 증기시키거나 감소시키는 방법에 대한 연구결과를 발표할 예정이다.

• Journal of Life Science
• /
• v.14 no.6 s.67
• /
• pp.1009-1017
• /
• 2004

Sialyltransferases cloned so far show the remarkable tissue-specific expression, which is correlated with the existence of cell type-specific sialylated sugar structure in glycoconjugates. In the previous studies, we found various mRNA isoforms of human sialyltransferases generated by alternative splicing and alternative promoter utilization. To understand the regulatory mechanisms for specific expression of human sialyltransferase genes and for production of their mRNA isoforms, in this study, we have isolated and characterized five kinds of human sialyltransferase genes: hST3Gal II, hST8Sia II, hST8Sia III, hST8Sia IV, and hST8Sia V. The hST3Gal II gene is composed of six exons, which span over 17kb, with exons ranging in size from 46 to over 1017 bp. The hST8Sia III gene comprises over 10 kb, and consists of only four exons, which is much smaller and simpler than other human sialyltransferase genes. In contrast, three genes (hST8Sia II, hST8Sia IV and hST8Sia V) span more than 70 kb, and comprise five or more exons. All exon-intron boundaries follow the GT-AG rule. In particular, the sialylmotif L, which is a highly conserved region in all cloned sialyltransferases, was found in one exon of hST8Sia III, whereas this motif is encoded by discrete exons in the other human sialyltransferases. Exon structures of these sialyltransferase genes show the structural diversity, as found in other human sialyltransferase genes reported so far. We determined the transcription start site of hST3Gal II gene by the 5'-RACE and cap site hunting experiments.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.3
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• Journal of Plant Biotechnology
• /
• v.32 no.1
• /
• pp.45-50
• /
• 2005

Virus-free stocks was produced by the combination of the heat treatment of virus infected plant and shoot-tip grafting (STS). To produce virus-free stocks, the plants infected with citrus viruses were used for virus-free stock production using the modified method of STG in thermotherapy at $40^{\circ}C$ for 16 hours in the light, and at $30^{\circ}C$ for 8 hours of darkness for 4 weeks. Trifoliate orange (P. trifoliata) were used as rootstock seedling for STG. Percentages of virus-free stocks against citrus tristeza virus (CTV), satsuma dwarf virus (SDV) and citrus tatter leaf virus (CTLV) were $75.7\%,\;100.0,\%\;82.6\%$ respectively. Shoot tip size for successful STG were as small as possible. Less than $0.3\;\cal{mm}$ of shoot tips gave the hight efficiency of virus free plants but survival rates were low. And, survival rate after shoot-tip culture was analyzed and the rates were dependant on the cultivars; Yuzu cultivar showed the hight survival rate ($74.6\%$) and early satsuma mandarin (Iwasagi) was $13.3\%$ as the lowest cultivar. But citrus trees were not succeed to grown, turned brown, and died.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.3
• /
• pp.217-224
• /
• 2021

Fluoroquinolone (FQ) resistant gram-negative pathogens have emerged worldwide, and the recent increase in FQ resistant Escherichia coli is of great concern in Korea. This study investigated FQ resistance determinants and the epidemiological relationship of 56 ciprofloxacin-resistant E. coli isolated from a tertiary hospital in Daejeon, South Korea from June to December 2018. Molecular epidemiology was investigated by multilocus sequence typing (MLST). Polymerase chain reaction (PCR) and sequence analysis were performed to identify chromosomal mutations in the quinolone resistance determining regions (QRDR) of gyrA, gyrB, parC, and parE and to describe the occurrence of the following plasmid-mediated quinolone resistance (PMQR) genes: aac(6)-Ib-cr, qepA, qnrA, qnrB, qnrC, qnrD, and qnrS. MLST analysis showed 12 sequence types (STs) and the most prevalent ST was ST131 (31/56, 55.4%), followed by ST1193 (13/56, 23.2%), and ST405 (3/56, 5.4%). In 56 ciprofloxacin-resistant E. coli isolates, Ser83→Leu and Asp87→Asn in gyrA and Ser80→Ile and Glu84→Val in parC (51.8%, 29/56) were the most frequent amino acid substitutions and aac(6)-Ib-cr (33.9%, 19/56) was the most common PMQR gene. These results of FQ resistance determinants were more frequently observed in ST131 compared with other clones. Continuous monitoring of the epidemiological characteristics of ciprofloxacin-resistant E. coli isolates and further investigation of FQ resistance determinants are necessary.

• Journal of Life Science
• /
• v.30 no.2
• /
• pp.122-128
• /
• 2020

Although Candida albicans is the major fungal pathogen of candidemia, severe infections by non-albicans Candida (NAC) spp. have been increasing in recent years. Among NAC spp., C. glabrata has emerged as the second most common pathogen. However, few studies have been conducted to investigate its structure, epidemiology, and basic biology. In the present study, multi-locus sequence typing (MLST) was performed with a total of 102 C. glabrata clinical isolates that were isolated from various types of clinical specimen. For MLST, six housekeeping genes-FKS, LEU2, NMT1, TRP1, UGP1, and URA3-were amplified and sequenced. The results were analyzed using the C. glabrata database. Out of a total of 3,345 base-pair DNA sequences, 49 variable nucleotide sites were found, and the results showed that 12 different sequence types (ST) were identified from the 102 clinical isolates. The data also demonstrated that the undetermined ST1 was the most predominant ST in Korea. Further, seven undetermined STs (UST) containing UST2-8 were classified at specific loci. The data from this study may provide a fundamental database for further studies on C. glabrata, including its epidemiology and evolution. The data may also contribute to the development of novel antifungal agents and diagnostic tests.