• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.89-97
• /
• 1999

In this paper the forming simulations of ellipse bulge have been researched by using $PAM-STAMP_{TM}$ to estimate the sheet metal forming and the plastic deformation characteristic of ellipse bulge. Thin elliptical diaphragms of brass, copper, aluminum, and mild steel are bulged in elliptical dies having aspect ratios of 1.33 and 2. In order to compare the simulation results with the experiment and ellipse bulge's theory derived by using Johnson and Duncan's theory, the relations of hydraulic pressure and polar height, polar thickness strain and polar height, were compared. According to this study, the results of simulation and ellipse bulge's theory derived by using Johnson and Duncan's theory, and the bursting pressure and the bursting polar height are good agreement to the experiment. So, the results of simulation by using $PAM-STAMP_{TM}$ and the ellipse bulge's theory will give engineers good information to make assessment the formability and plastic deformation characteristic of hydraulic ellipse bulge test.

• Child Health Nursing Research
• /
• v.12 no.2
• /
• pp.215-222
• /
• 2006

Purpose: This study was done to identify the effects of the distraction generated by character stamp and stickers on reduction of intravenous injection pain. Method: This study was conducted using a quasi experimental non-equivalent control group non-synchronized design. 60 preschool children who admitted to a Pediatric Department in a C University Hospital were selected as subjects. Convenience assignment was used. The two groups were homogeneous on characteristics. Results: In the experimental group, objective pain(t=3.666, p=.001), subjective pain (t=3.415, p=.001) and perceived pain by the mother(t=2.528, p=0.014) decreased after intravenous injections than the control group. There were no statistical significant differences in pulse rate or fear between the experimental and the control group.　Conclusion: These findings indicate that using character stamp and stickers could be considered as an independent nursing intervention for intravenous injection pain reduction in preschooler.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.879-884
• /
• 2012

In this Paper, we propose an Energy Efficient Time Synchronization technique based on WUSB (Wireless USB) over WBAN (Wireless Body Area Networks) protocol required for Wearable Computer systems. For this purpose, the proposed Time Synchronization algorithm minimizes power consumption and estimates time information with accuracy. It is executed on the basis of WUSB over WBAN protocol at each sensor node comprising peripherals of a wearable computer system. It minimizes power consumption by exchanging time stamp packets and forming a hierarchical structure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.139-142
• /
• 2012

It reflects the value of 2D contents goods. It uses, 3D when holograms DID charm of the goods, the buying power and necessary etc. DID image system are the stamp. 3D holograms and DID image systems, the screen, it plans CMS from the research which it sees and it embodies 3D hologram contents DID image systems. Also charm, also the buying power and analysis, the comparative stamp do satisfaction etc. in about 2D contents and 3D contents and 3D holograms DID.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.138-145
• /
• 2006

A nanopatterning technique was proposed and demonstrated for low cost and mass productive process using the scanning probe lithography (SPL) and soft lithography. The nanometer scale structure is fabricated by the localized generation of oxide patterning on the H-passivated (100) silicon wafer, and soft lithography was performed to replicate of nanometer scale structures. Both height and width of the silicon oxidation is linear with the applied voltagein SPL, but the growth of width is more sensitive than that of height. The structure below 100 nm was fabricated using HF treatment. To overcome the structure height limitation, aqueous KOH orientation-dependent etching was performed on the H-passivated (100) silicon wafer. Soft lithography is also performed for the master replication process. Elastomeric stamp is fabricated by the replica molding technique with ultrasonic vibration. We showed that the elastomeric stamp with the depth of 60 nm and the width of 428 nm was acquired using the original master by SPL process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.126-126
• /
• 2004

1996년 Chou 등이 개발한 가열방식의 나노임프린트 리소그래피(nanoimprint lithography, NIL)은 선폭 100nm 이하의 나노구조물을 경제적으로 제작할 수 있는 대표적인 나노패턴닝(nano-patterning) 공정으로 많은 기대가 모아지고 있으나, 열변형에 의해 다층정렬이 어렵다는 점과, 점도가 큰 레지스트(resist)를 임프린트하기 위해서는 고압(∼30 bar)이 필요하다 점 등의 문제점이 있다. 이를 해결할 수 있는 방법으로 UV 나노임프린트 리소그래피(ultraviolet nanoimprint lithography, UV-NIL)를 들 수 있다.(중략)

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.86-91
• /
• 2000

Numerical simulation of sheet metal forming for panels as other components has wide acceptance in the automotive industry. Therefore this paper was focused in the drawability factors (which are friction coefficient , radius of die and punch ) on the square cup deep drawing by the explicit finite elements code $PAM-STAMP^{TM}$. The computed results are compared with the experimental results to show the validity of the analysis. In order to compare the simulation results with the experiment results and predict the effect of drawability factors, the relationships between punch load punch stroke, and the relationships between thickness strain and distance are used. According to this study, the results of simulation by using $PAM-STAMP^{TM}$ will give engineers good information to access the drawability of square drawing.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.5
• /
• pp.267-271
• /
• 2006

A polymeric waveguide-type wavelength filter based on a Bragg grating has been proposed and fabricated using the simple nanoimpring technique, for the first time to our knowledge. An ultraviolet transparent stamp with the single-mode waveguide pattern incorporating a surface-relief-type Bragg grating was specially designed selective dry-etching process. Using this stamp, the device fabrication was substantially involving just a single-step process of imprint followed by polymer spin-coating. The achieved maximum reflection was higher than 25 dB at the center wavelength of 1569 nm. And the 3-dB bandwidth was 0.8 nm for the device length of 1.5 cm.

• Structural Engineering and Mechanics
• /
• v.72 no.6
• /
• pp.775-783
• /
• 2019

The present study deals with the numerical analysis of the symmetric contact problem of two bonded layers resting on an elastic half plane compressed with a rigid punch. In this context, Finite Element Method (FEM) based software called ANSYS and ABAQUS are used. It is assumed that the elastic layers have different elastic constants and heights and the external load is applied to the upper elastic layer by means of a rigid stamp. The problem is solved under the assumptions that the contact between two elastic layers, and between the rigid stamp are frictionless, the effect of gravity force is neglected. To validate the constructed model and obtained results a comparison is performed with the analytical results in literature. The numerical results for normal stresses and shear stresses are obtained for various parameters of load, material and geometry and are tabulated and illustrated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.829-832
• /
• 2002

공개키 기반구조의 응용이 네트워크 상의 전자 거래로 확대됨에 따라 통신 상대방의 인증을 위해 인증서의 사용이 증대되었으며, 이 인증서는 사용하기 전에 반드시 검증 과정을 거쳐야 한다. 본 논문에서는 시간정보(Time-stamp Information)를 포함한 인증서 검증 프로토콜을 제안한다. 본 논문에서는 긴 길이의 폐지 정보와 주기적으로 발행되는 특징을 가진 인증서 폐지 목록 등 기존의 인증서 검증 메커니즘들이 가지는 문제점을 분석하고 현재의 인증서 상태에 대한 유효성뿐만 아니라 인증서 검증 결과에 시간 정보를 추가하여 보다 신뢰할 수 있는 인증서의 상태 검증 정보를 제공할 수 있는 프로토콜을 제안한다.