• Title/Summary/Keyword: SS7

Search Result 944, Processing Time 0.03 seconds

A Genome-wide Association Study of Preferred Primal Cuts of Hanwoo Cattle Using Single-step GBLUP (한우 부분육 선호부위에 대한 ssGBLUP을 활용한 GWAS 분석)

  • Lee, Jae Gu;Park, Byoungho;Park, Mi Na;Alam, M.;Kim, Sidong;Do, Changhee;Choi, Tae Jeong
    • Journal of agriculture & life science
    • /
    • v.50 no.3
    • /
    • pp.99-117
    • /
    • 2016
  • Data on primal cuts were collected from 1,829 steers of Hanwoo progeny testing programs, between 2010 and 2015 for the ssGWAS. SNP data were analyzed by using Illumina Bovine 50K Beadchip. The SNP data that matches with phenotype data was 674 animals. As a first step, the genomic estimated breeding value(GEBV) of the loin and rib cuts were estimated, which was used in the estimation of SNP marker effects and their variances related to the traits. Then, the estimated variance explained by each marker was expressed as a proportion to the total genetic variance. Finally, the SNP loci and their significance to any possible QTL were examined. Among the 20 best SNP loci explaining a larger proportion of SNP variance to the total genetic variance for tender loin yield, the region between 12,812,193 ~ 12,922,313bp on BTA 10 harbored a cluster of SNPs that explained about 7.32 to 7.34% of the total genetic variance. For strip loin yield, a peak for higher effects for multiple SNPs was found in BTA24, between 38,158,543 and 38,347,278bp distances, which explained about 8.36 to 8.56% of the observed variance for this trait. For loin yield had relatively smaller effects in terms of the total genetic variance. Therefore, loin yield might be affected by a few loci with moderate effects and many other loci with smaller effects across the genome.

Thickness Effects of Active Layers on the Properties of Zinc Tin Oxide Transparent Thin Film Transistors (Zinc Tin Oxide 투명 박막트랜지스터의 특성에 미치는 활성층 두께의 영향)

  • Ma, Tae Young
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.27 no.7
    • /
    • pp.433-437
    • /
    • 2014
  • Transparent thin film transistors were fabricated on $n^+$-Si wafers coated by $Al_2O_3/SiO_2$. Zinc tin oxide (ZTO) films deposited by rf magnetron sputtering were employed for active layers. The mobility (${\mu}s$), threshold voltage ($V_T$), and subthreshold swing (SS) dependances on ZTO thickness were analyzed. The $V_T$ decreased with increasing ZTO thickness. The ${\mu}s$ raised from $5.1cm^2/Vsec$ to $27.0cm^2/Vsec$ by increasing ZTO thickness from 7 nm to 12 nm, and then decreased with ZTO thickness above 12 nm. The SS was proportional to ZTO thickness.

Calculate of EMC and Runoff Characteristic of Silica Mine (규사광산의 유출특성 및 EMC산정)

  • Choi, Yong-Hun;Won, Chul-Hee;Shin, Min-Hwan;Yang, Hee-Jung;Choi, Jung-Dae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1042-1046
    • /
    • 2009
  • 강원도 홍천군 북방면 능평리에 위치한 규사광산을 2008년 3월부터 12월까지 발생한 강우사상에 대하여 모니터링을 실시하였다. 모니터링 지점은 채광작업과 가공작업이 이루어지는 계곡의 하류로 평시 $500m^2$/day의 유량이 흐르는 작은 소하천이다. 관측된 13회의 총 강우량은 712.6 mm가 발생하였다. 강우강도는 0.5 ${\sim}$ 4.7 mm/hr, 선행무강우일수는 1.2 ${\sim}$ 9.8일로 나타났다. 유출률은 28.0 $^{\sim}$ 98.0 %로 나타났으며, 유출율 98.0 %는 168.0 mm의 많은 양의 강우가 발생한 7월 24일부터 25일까지의 강우사상에서 발생하였다. 채석과 가공작업등의 영향으로 인하여 강우시 다른 오염 물질보다 SS 농도와 EMC가 매우 높고, 범위가 가장 큰 것으로 나타났다. 또한 SS는 강우량과 건기일수에 민감한 영향이 있는 것으로 나타났다. 따라서 규사광산지역은 다른 오염 물질보다 SS를 저감 시킬 수 있는 비점오염저감시설이 필요할 것으로 사료된다. 기상조건에 따른 오염부하와 EMC의 정확한 산정하기 위해서는 장기간의 모니터링을 통한 많은 자료의 수집이 동반되어야 할 필요가 있다. 본 연구에서 조사된 자료와 분석된 결과는 토지이용별 비점오염부하의 산정과 저감기술의 개발에 활용할 수 있으며, 수질오염총량제의 신뢰성을 향상시킬 것으로 판단된다.

  • PDF

Enhancement of Sewage Treatment Efficiencies by Recirculation in Absorbent Biofilter System (재순환에 의한 흡수성 바이오필터 시스템의 오수처리효율 향상)

  • Kwun, Soon-Kuk;Cheon, Gi-Seol;Kim, Song-Bae
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.47 no.3
    • /
    • pp.69-76
    • /
    • 2005
  • An Absorbent Biofilter System (ABS) combined with the recirculation process was investigated for the feasible application in additional removing of organics (BOD, SS) as well as nutrients (TN, TP) from small Community wastewater in Korea. Polyurethane biofilter media with high porosity and large surface area were /used for the aerobic system. A part of treated wastewater was recirculated into the anoxic septic tank to promote removal of nutrients. The concentrations of BOD and SS of treated wastewater satisfied the regulations for small on-site wastewater treatment facility (10 mg/L) during the overall experimental period. The effluent concentrations of BOD and SS were decreased with enhancement of removal efficiencies of 95.7 and $96.7\%$. The nitrogen and phosphorus removal efficiencies by the recirculation increased to $52.9\%\;and\;43.2\%$ in average during the overall experimental period, respectively. With the improvement, these values were increased as much as additional 42 and $18\%$ compared with those of non-recirculation. The rates of nitrification and denitrification were enhanced showing $65\~77\%\;and\;42\~92\%$, respectively. The described process modification is a low cost and effective method of enhancing nitrogen and phosphorus removal, especially on existing systems without changing major design components of a treatment facility.

Analysis of Degradation Behavior of Structural Steels Depending on Environment (환경에 따른 구조용 강의 열화거동 분석)

  • Lee Chang-Soon;Park In-Gyu;Kim Yong-Ki;Chang Se-Ky
    • Proceedings of the KSR Conference
    • /
    • 2004.06a
    • /
    • pp.171-176
    • /
    • 2004
  • Electro chemical corrosion tests were conducted on two structural steels, SS400 and SM490A, in various solutions with different pH values, All materials showed typical active corrosion behaviors in the solutions, and corrosion potential and current density were measured from the slopes obtained from the Tafel curves using linear polarization method. Corrosion potential increased in the acidic region and then decreased depending on the pH values of the solutions. All materials showed the fast corrosion rate in artificial acid rain(pH=4.7), but the slower corrosion rate was observed in NaOH solution(pH=12.0) for SS400 and in distilled water(pH=7.0) for SM490A, respectively, which is thought to come from the difference in chemical composition of two alloys. Generally homogeneous corrosion occurred in acid rain condition, and almost no corrosion was observed in distilled water in both alloys. NaOH solution produced more corrosion than distilled water, and more corrosion had progressed in SS400 than in SM490A in $3.5\%$ NaCl solution.

  • PDF

Electrical Properties Depending on Active Layer Thickness and Annealing Temperature in Amorphous In-Ga-Zn-O Thin-film Transistors (활성층 두께 및 열처리 온도에 따른 비정질 인듐갈륨징크옥사이드 박막트랜지스터의 전기적 특성 변화)

  • Baek, Chan-Soo;Lim, Kee-Joe;Lim, Dong-Hyeok;Kim, Hyun-Hoo
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.25 no.7
    • /
    • pp.521-524
    • /
    • 2012
  • We report on variations of electrical properties with different active layer thickness and post-annealing temperature in amorphous In-Ga-Zn-O (IGZO) thin-film transistors (TFTs). In particular, subthreshold swing (SS) of the IGZO-TFTs was improved as increasing the active layer thickness at an given post-annealing temperature, accompanying the negative shift in turn-off voltage. However, as increasing post-annealing temperature, only turn-off voltage was shifted negatively with almost constant SS value. The effect of the active layer thickness and post-annealing temperature on electrical properties, such as SS, field effect mobility and turn-off voltage in IGZO-TFTs has been explained in terms of the variation of trap density in IGZO channel layer and at gate dielectric/IGZO interface.

Structural Analysis of Deformation and Force on Base Frame by Materials of Processed Food Equipment (가공식품 설비의 재질별 베이스 프레임에 관한 변형 및 하중 구조해석)

  • Kim, Ki-Hong;Kim, Seok-Ho;Choi, Won-Sik
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.25 no.5
    • /
    • pp.741-746
    • /
    • 2022
  • In this paper, structural analysis was conducted on the base frame for materials of the conveyor system that automatically produces nurungji. The materials of the base frame were selected as SS400, STS304, Al6063-5. Structural analysis performed Von-Mises stress and maximum displacement for 38 hot plates in real situation, and performed weight of distribution force for yield strength, and calculated safety factor. SS400 and STS304 have little displacement, but Al6063-5 is deformed to 0.149mm, which is 2.6 times greater than other materials. However, since the safety factor was calculated as 8.5, it can be applied to the applicable food processing equipment. The weight of the distributed force for the yield strength of the materials was 17.7kN for SS400, 14.7kN for STS304, and 10.2kN for Al6063-T5. When manufacturing other processed foods with a base frame of the same size, a material suitable for the corresponding weight should be selected.

Estimation of Nonpoint Pollutant Loads in the Hwanggujichoen Basin using SWMM (SWMM을 이용한 황구지천유역의 비점원오염부하량 평가)

  • Cho, Jae-Heon;Cho, Nam-Heung
    • Journal of Environmental Impact Assessment
    • /
    • v.12 no.5
    • /
    • pp.349-358
    • /
    • 2003
  • Water pollution of Hwanggujicheon stream is severe because urban area of Suwon City is included in the basin. A countermeasure for water quality prevention of the stream is necessary. In this study, nonpoint pollutant load of BOD, SS, TN and TP are estimated using SWMM. The result indicates that BOD, SS, TN and TP loads during 3 months from July to September are 67.0%, 60.8%, 54.7% and 74.5% of the annual total load, respectively. We can see that most of nonpoint pollutant loads are generated in the rainy season. Annual nonpoint pollutant loads of BOD, SS, TN and TP in the Hwanggujicheon stream are 342 ton, 1,500 ton, 480 ton and 12.6 ton, respectively.

Acquisition of PN sequence by neural netowrks in direct-sequence spread-spectrum systems (신경망을 이용한 DS/SS 시스템의 PN 코드의 초기 동기)

  • 이상목;유철우;강창언;홍대식
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.7
    • /
    • pp.44-54
    • /
    • 1996
  • In DS/SS systems it is necessary to synchronize the locally generated despreading signal with the received spreading signal to demodulate the received signal. The synch process between the two signals is usually accomplished in two steps : first acquisition then tracking. In this paper, an acquisition system aided by the neural network is proposed for the rapid and exact acquisition in DS/SS. the neural netowrk is composed o fthree-layered perpecptrons and trained by the backpropagation algorithm. The performance of the proposed system is analyzed and compared with ones of conventional systems using the sequential estimation technique under an additive while gaussian noisy channel. In all of th econsidered simulations, the proposed system outperforms conventional systems.

  • PDF