• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1168-1176
• /
• 2003

Internet telephony service is very cheap and very easy to introduce the value-added service than the POTS, but is difficult to the QoS of telephone service. The existing internet typically offers "best effort" services only, which do not make any commitment about delay, packet loss and jitter. This paper compensates the low quality of the speech for packet loss or delay using FEAPT algorithm in Internet phone. In the FEAPT algorithm, the receiver expands the received packet under resonable threshold, and hence compensates the QoS of speech.of speech.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.423-424
• /
• 2008

The procedure of design and verification for a 16-bit RISC processor is introduced in this paper. The proposed processor has Harvard architecture and consists of 24-bit address, 5-stage pipeline instruction execution, and internal debug logic. ADPCM vocoder and SOLA algorithm are successfully carried out on the processor made with FPGA.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.78-82
• /
• 1988

자유표면 유동을 시뮬레이션할 수 있는 수치 알고리듬 중 가장 최근에 개발된 volume of fluid (VOF) 방법을 이용하여 뚜껑이 닫힌 사각 컨테이너 속의 슬라싱을 시뮬레이션 하였다. 그 결과 유동이 작은 경우에는 알고리듬이 불안정하게 되어 장기간 시뮬레이션을 어렵게 하는 문제점이 발견되었다. 이 문제점을 해결하기 위해 VOF 알고리듬이 불안정하게 되어 장기간 시뮬레이션을 어렵게하는 문제점이 발견되었다. 이 문제점을 해결하기 위해 VOF 알고리듬 중 유량이동 알고리듬을 수정하여 원래의 알고리듬으로 시뮬레이션한 결과와 비교 분석하였다

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.127-132
• /
• 1998

The present study is aimed to investigate flow characteristics of Two dimensional backward-facing step by numerical approach. A convection conservative difference scheme based upon SOLA algorithm is used for the solution of the two-dimensional incompressible Navier-Stokes equations to simulate the laminar, transitional and turbulent flow conditions at which the experimental data can be available for the backward-facing step. The twenty kinds of Reynolds number are used for the calculations. In an effort to demonstrate that the reported solutions are dependent on the mesh refinement, computations are performed on seven different meshes of uniformly increasing refinement. Also to investigate the result of inflow dependence, two kinds of the inflow profile are chosen for the laminar flow. As criterion of benchmarking the result of numerical simulation, reattachment length is used for the selected Reynolds numbers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.176-183
• /
• 1999

This paper is aimed to investigate behaviour of vortex in 2-D step cavity with high Reynolds numbers$(3.2{\times}10^{3},\;10^{4},\;3{\times}10^{4},\;5{\times}10^{4}\;and\;7{\times}10^{4})$. The SOLA algorithm which is MAC type was adopted to solution method computing the flow field on irregular grid. In case of $Re=7{\times}10^{4}$ flow behavior is steady bu periodic unsteady sinusoidal fluctuation of local velocity and kinetic energy is found for $Re=10^{4}$ Continuous movements of small eddies in the secondary flow regions are discov-ered for $3{\times}10^{4}$ Generation of eddies and their active migrating behavior are detected over $Re=5{\times}10^{4}$ resulting in complete unsteady and non-linear flow characteristics Furthermore a typhoon-like vortex(TLV) appears intermittently and rotates along the separation regions and boundary layers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.9-18
• /
• 1999

The present study is aimed to investigate flow characteristics of two-dimensional backward-fac-ing step by numerical approach. A convection conservation difference scheme based upon SOLA algorithm is used for the solution of the two-dimensional incompressible Navier-Stokes equations to simulate the laminar transitional and trubulent flow conditions at which the experimental data can be available for the backlward-facing step. The twenty kinds of reynolds number are used for the calculations. In an effort to demonstrate that the reported solutions are dependent on the mesh refinement computations are performed on seven different meshes of uniformly increasing refinement. also to investigate the result of inflow dependence two kinds of the inflow profile are chosen for the laminar flow. Irregular grid is adopted to minimize the errors on the satis-faction fo the discretized continuity. As criterion of benchmarking the result of numerical simula-tion reattachment lengthis used for the selected Reynolds numbers. The results of the present study prove the fact that the numerical predictions agree well with the experimental data and the flow characteristics are shown at the backward-facing step.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.4
• /
• pp.622-632
• /
• 1995

The present numerical study is aimed to investigate time-dependent characteristics of a two-dimensional lid-driven square cavity flow of three high Reynolds numbers, $7.5{\times}10^3$, $10^4$ and $3{\times}10^4$. A conservative convection term on irregular grids was adopted by renewing the MAC type difference schemes on regular grids. Relaxation of velocity and pressure is implemented by SOLA algorithm. In case of $Re=7.5{\times}10^3$, flow behavior converges to steady state after a transient period. But for $Re=10^4$, periodic unsteady sinusoidal fluctuation of local velocity and kinetic energy is found and continuous movements of small eddies in the secondary flow regions are also discovered. Random generation of eddies and their active migrating behavior are detected for $Re=3{\times}10^4$, resulting in complete unsteady and non-linear flow characteristics. And, an organized structure similar to a Moffat vortex is also observed from the time-mean flow patterns. Furthermore, a typoon-like vortex(TLV) appears intemittently and rotates along the separation regions and boundary layers.

• Journal of information and communication convergence engineering
• /
• v.13 no.2
• /
• pp.132-138
• /
• 2015

Enlarging the horizontal viewing angle is an important feature of integral imaging monitors. Thus far, the horizontal viewing angle has been enlarged in different ways, such as by changing the size of the elemental images or by tilting the lens array in the capture and reconstruction stages. However, these methods are limited by the microlenses used in the capture stage and by the fact that the images obtained cannot be easily projected into different displays. In this study, we upgrade our previously reported method, called SPOC 2.0. In particular, our new approach, which can be called SPOC 2.1, enlarges the viewing angle by increasing the density of the elemental images in the horizontal direction and by an appropriate application of our transformation and reshape algorithm. To illustrate our approach, we have calculated some high-viewing angle elemental images and displayed them on an integral imaging monitor.