• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.197-205
• /
• 2018

Nowadays, wireless sensor networks (WSNs) have been widely adopted in structural health monitoring (SHM) systems for social overhead capital (SOC) public infrastructures. Structural health information, environmental disturbances and sudden changes of weather conditions, damage detections, and external load quantizing are among the capabilities required of SHM systems. These information requires an efficient transmission with which an efficient mobility management support for wireless networks can provide. This paper deals with the analysis of mobility management schemes in order to address the real-time requirement of data traffic delivery for critical SHM information. The host-based and network-based mobility management protocols have been identified and the advantages of network mobility (NEMO) enabled Proxy Mobile Internet Protocol version 6 (PMIPv6) have been leveraged in order to address the SHM information transmission needs. The scheme allows an efficient information transmission as it improves the handover performance due to shortened handover latency as well as reduced signaling overhead.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.301-308
• /
• 2021

It is important to develop a digital SOC (Social Overhead Capital) maintenance system for preemptive maintenance in response to the rapid aging of social infrastructures. Abnormal signals induced from structures can be detected quickly and optimal decisions can be made promptly using IoT sensors deployed on the structures. In this study, a digital SOC monitoring system incorporating a multimetric IoT sensor was developed for long-term monitoring, for use in cloud-computing server for automated and powerful data analysis, and for establishing databases to perform : (1) multimetric sensing, (2) long-term operation, and (3) LTE-based direct communication. The developed sensor had three axes of acceleration, and five axes of strain sensing channels for multimetric sensing, and had an event-driven power management system that activated the sensors only when vibration exceeded a predetermined limit, or the timer was triggered. The power management system could reduce power consumption, and an additional solar panel charging could enable long-term operation. Data from the sensors were transmitted to the server in real-time via low-power LTE-CAT M1 communication, which does not require an additional gateway device. Furthermore, the cloud server was developed to receive multi-variable data from the sensor, and perform a displacement fusion algorithm to obtain reference-free structural displacement for ambient structural assessment. The proposed digital SOC system was experimentally validated on a steel railroad and concrete girder bridge.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.32-38
• /
• 2020

The deployment of geographically distributed wireless sensors has greatly elevated the capability of monitoring structural health in social-overhead capital (SOC) public infrastructures. This paper deals with the utilization of a distributed mobility management (DMM) approach for the deployment of wireless sensing devices in a structural health monitoring system (SHM). Then, a wireless sensing mechanism utilizing low-energy adaptive clustering hierarchy (LEACH)-based clustering algorithm for smart sensors has been analyzed to support the seamless data transmission of structural health information which is essentially important to guarantee public safety. The clustering of smart sensors will be able to provide real-time monitoring of structural health and a filtering algorithm to boost the transmission of critical information over heterogeneous wireless and mobile networks.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.93-101
• /
• 2010

As the number of indispensable needs of clean energy increases due to the green new deal revolution, the possibility of heat energy harvesting from the surrounding infrastructures such as a railroad or highway was verified. In order to find more efficient usage of a heat source, the possibility of transforming heat into electricity were confirmed using Bi-Te type thermoelectric element, and electrical quality were tested with experiments of different heat source and environmental change in the surrounding infrastructures. After careful experiments, the possibility of collecting thermal energy and findings of the heat temperature change in infrastructrue are verified with a result of obtaining almost 20.82W in 70 celcius($^{\circ}C$) temperature differences and $1m^2$ surface area. Consequently, the ratio of heat temperatiure change and transforming surface area is the most crucial factor in the harvesting heat energy, and reducing thermal loss and improving thermal convection as well as transformation efficiency of thermoelectric element is required to get more efficient and durable generation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1D
• /
• pp.71-80
• /
• 2012

Metropolitan transport demand has increased in Seoul Metropolitan Area (SMA) due to the expansion of its role and land use. Various public transport modes have to be supplied to relieve road congestions for the convenience of users. During the constructions of theses infrastructures some conflicts between the central government and local governments arise for sharing financial resources. In this study finance sharing criteria is developed for the metropolitan BRT, transfer facility, and public garages. Finally, a case study has been done for the metropolitan BRT between Cheongra and Hwagok area in SMA.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.13-22
• /
• 2016

Recently, interest for environmental pollution in various fields is on the increase, and the researches on the life cycle assessment of environmental performance assessment method for calculating the environmental loads are currently most performed. It is expected to have a significant influence on the environment, since SOC infrastructures are go through a variety of materials, manufacturing process, however it is judged that researches and measures for environmental pollution is insufficient. In this study, we build the data for 204 of steel bridge designed after 2000 year, and the 100 of bridge which were selected to from obtained results were calculated the environmental loads at the planning stage based on the life cycle assessment. In addition, standard classification systems in work type for steel bridges were established. Based on this, the basic design data and input materials for the bridges are applied to the LCI DB, and the environmental load for required material is evaluated and is shown as Eco-point. Environmental loads obtained from this study, it is judged that can be utilized as a basic data for the process of the life cycle assessment in future steel bridge design.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.3
• /
• pp.465-479
• /
• 2020

Regardless of the domestic and foreign governments/companies, SOC (Security Operation Center) has operated 24 hours a day for the entire year to ensure the security for their IT infrastructures. However, almost all SOCs have a critical limitation by nature, caused from heavily depending on the manual analysis of human agents with the text-based monitoring architecture. Even though, in order to overcome the drawback, technologies for a comprehensive visualization against complex cyber threats have been studying, most of them are inappropriate for the security monitoring in large-scale networks. In this paper, to solve the problem, we propose a novel visual approach for intuitive threats monitoring b detecting suspicious IP address, which is an ultimate challenge in cyber security monitoring. The approach particularly makes it possible to detect, trace and analysis of suspicious IPs statistically in real-time manner. As a result, the system implemented by the proposed method is suitably applied and utilized to the real-would environment. Moreover, the usability of the approach is verified by successful detecting and analyzing various attack IPs.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.74-84
• /
• 2017

Soil erosion is often extreme in Korea due to high rainfall intensities and steep slopes, and climate change has also increased the risk of erosion. Despite its significane, erosion-induced soil organic carbon (SOC) emission and water resource loss are not well understood, along with the lack of an integrated surface soil erosion protection policy. Therefore, to design adequate protection policies, land users, scientists, engineers and decision makers need proper information about surface soil and watershed properties related to greenhouse gas emission potential and water conservation capability, respectively. Assuming the total soil erosion of $346Tg\;yr^{-1}$, soil organic matter (SOM) content of 2% (58% of SOM is SOC), and mineralization rate of 20% of the displaced carbon, erosion-induced carbon emission could reach $800Gg\;C\;yr^{-1}$. Also the available water capacity of the soil was estimated to be 15.8 billion tons, which was 14 times higher than the yearly water supply demand in Seoul, Korea. Therefore, in order to prevent of soil erosion, this study proposes a three-stage plan for surface soil erosion prevention: 1) classification of soil erosion risk and scoring of surface soil quality, 2) selection of priority areas for conservation and best management practices (BMP), and 3) application of BMP and post management.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.3 s.19
• /
• pp.114-119
• /
• 2004

A road is an infrastructure that helps boost up growth of local economy, connections among local communities and living conditions. For South Korea the increase in infrastructures like roads now concentrates on specific regions, which causes regional imbalance. also, some areas are faced with the overall weakness of local economy such as decrease in local tax revenues, slowdown in industrial and economic growth of regions, and the low independence of local finances because lack of roads, a basis of local economic growth, make big and smaller business reluctant to invest in localities. In addition, even though the power-centralized age turns to a decentralized age, the preference of development policies by the existing economic size rather than those of nationwide balanced development gets the economic gap of localities deeply-rooted; moreover, disparity of local wealth has a tendency to even differentiate the overall quality of living. The paper intends to analyze relations between road development and local economy focused on road construction, one of requisites to balance national development and accelerate local economy.

• Journal of Distribution Research
• /
• v.1 no.1
• /
• pp.41-63
• /
• 1996

In spite of economy has a critical cycle such as, production, distribution and consumption, we hardly concentrated our study to distributional system and behavior. Especially in Korea, Traditional idea had tried to ignore the people who work in this economic value at all. Manufacturers, other than retailers and wholesalers, had a belief that the manufacturing can control distributional channels forever. Unfortunately, technological and educational advances caused the quality equalization among developing and developed countries as well as among big and small manufacturers in their products. By this reason, economists are searching the economists dark continet' mentioned by Peter Drucker as a new source of wealth. According to a report by well-known economic research institute in Switzerland, Korea has classified in the lower level group in terms of international compatitive power. At the same time, business firms complain that they are suffering from lack of SOC and infrastructures. As an important mean to overcome the economic bottleneck, economists suggest in improve our distributional atmosphere. Basically, distributional study has two sub-fields as: commercial and physical distributions, Distributional system mainly concerns about to shorten the distances of time and space between production and consumption. The closer the distances, the higher efficiency can be achieved. Building distributional system will cost, but tile results will save social costs. Based on this idea, economists proposed several ways to cut the distances and to save costs, Naturally, they hope their beliefs can be adapted by business firms and governments. But frequently, their theories doesn't make any fruit. This paper has studied about the composition of joint transportational and distributional systems. And, even though there's no Marshall in tile real world at this point authors are trying to define the transportational and physical distributional costs, the most powerful factor that can impact to economic decision making.