• Animal cells and systems
• /
• v.16 no.3
• /
• pp.207-214
• /
• 2012

Burns are one of the most devastating forms of trauma and wound healing is a complex and multicellular process, which is executed and regulated by signaling networks involving numerous growth factors, cytokines, and chemokines. Recombinant human granulocyte macrophage colony-stimulating factor (rhGM-CSF) was specifically produced from rice cell culture through use of a recombinant technique in our laboratory. The effect of rhGM-CSF on promotion of deep second-degree burn wound healing on the back skin of a hamster model was evaluated through a randomized and double-blind trial. As macroscopic results, hamster skins of the experimental groups showed earlier recovery by new epidermis than the control groups. Immunohistochemical reactions of proliferating cell nuclear antigen and transforming growth factor-b1, which are indicators of cell proliferation, were more active in the experimental group, compared with the control group. On electron microscopy, basal cells in the epidermis of the experimental group showed oval nuclei, prominent nucleoli, numerous mitochondria and abundant free ribosomes. In addition, fibroblasts contained well-developed rough endoplasmic reticulum with dilated cisternae. Bundles of collagen fibrils filled the extracellular spaces. Particularly, ultrastructural features indicating active metabolism for regeneration of injured skin at 15 days after burn injury, including abundant euchromatin, plentiful free ribosomes, and numerous mitochondria, were observed. These findings suggest that use of rhGM-CSF could result in accelerated deep second-degree burn wound healing in animal models.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.548-558
• /
• 2013

In this work, laser induced breakdown spectroscopy (LIBS) is used to investigate soil samples collected from different desert areas of Riyadh city in Saudi Arabia. Both qualitative analysis and plasma parameters are studied via the observed LIBS spectra. These experiments have been done using a Spectrolaser-7000 system with 50 mJ fundamental wavelength of Nd:YAG laser and detection delay time of 1 microsecond. Many spectral lines are highly resolved for many elements like Al, Fe, Mg, Si, Mn, Na, Ca and K. The electron temperatures Te and electron densities Ne, for the constituent of generated LIBS plasma, are determined for all the collected samples. It is found that both Te and Ne vary from one desert area to other. This variation is due to the change of the elemental concentration in different desert areas that affects the sample's matrices. Time dependent measurements have also been performed on the soil samples. While the signal-to-base ratio (SBR) reached its optimal value at 1 microsecond, the plasma parameters Ne and Te reach values of $4{\times}10^{17}cm^{-3}$ and 9235 K, respectively, at 2.5 microsecond. The later indicate that the plasma cooling processes are slow in comparison to the previously observed results for metallic samples. The observed results show also that in the future it is possible to enhance the exploitation of LIBS in the remote on-line environmental monitoring application, by following up only the values of Ne and Te for one element of the soil desert sample using an optical fiber probe.

• Plant Breeding and Biotechnology
• /
• v.5 no.3
• /
• pp.192-203
• /
• 2017

Metabolite profile is a powerful analytical technique to identify the functional characterization of plants. In this study, the phytochemicals and secondary metabolites of lentils (Lens culinaris) were analyzed to compare the anti-oxidative activities according to the different colors. The polar metabolites, fatty acids, carotenoids, flavonoids, anthocyanins, total phenolic acids, DPPH activity were analyzed. Three kind of lentils, French green whole lentil (FG), red whole lentil (LR), and green whole lentil (LG) (ASIA SEED Co., LTD), were used for this study. Fatty acids, phytochemicals, and antioxidative components from each lentil varieties were analyzed by official methods. The contents of lutein in carotenoids were 6-9 times higher than zeaxanthin in all lentils, but were not significantly different among three varieties. The content of carotenoids in FG was lower significantly than those in the LR and LG. Myricetin and luteolin were detected in the only FG. Kaempferol and delphinidin were significantly highest in the FG. Most of the phenolic acids except coumarate were higher in FG and LG than in LR. Also antioxidant effects ($EC_{50}$) were higher in FG and LG than in LR. The analyzed metabolites obtained from lentils showed distinct separation in the PCA results according to the varieties. Also, lentils showed different anti-oxidant profiles according to the colors. FG and LG showing higher contents of phytochemicals showed higher antioxidative activity than LG containing relative low contents of phytochemicals.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.2
• /
• pp.95-104
• /
• 2019

PURPOSE. To evaluate the effect of surface treatments and repair materials on the shear bond strength and to measure the fracture toughness of CAD/CAM provisional restoration materials. MATERIALS AND METHODS. Four CAD/CAM (3D printing: Nextdent C&B and ZMD-1000B Temporary, CAD/CAM resin block: Yamahachi PMMA disk and Huge PMMA block) and four conventional (monometacrylate: Jet and Alike, dimetacrylate: Luxatemp and Protemp 4) materials were selected to fabricate disk-shaped specimens and divided into six groups according to surface treatment (n=10). CAD/CAM materials were repaired with Jet or Luxatemp, while conventional materials were repaired with their own materials. The shear bond strength was measured by using universal testing machine. Ten rectangular column-shaped specimens for each material were fabricated to measure the fracture toughness by single edge v notched beam technique. Statistical analysis was performed by one-way ANOVA. RESULTS. The highest shear bond strength of CAD/CAM materials was achieved by SiC paper + sandblasting. It was also accomplished when repairing 3D printing materials with Luxatemp, and repairing CAD/CAM resin blocks with Jet. Yamahachi PMMA disk showed the highest fracture toughness. Nextdent C&B showed the lowest fracture toughness value but no statistically significant difference from Alike and Luxatemp (P>.05). CONCLUSION. In order to successfully repair the CAD/CAM provisional restoration, mechanical surface treatment and appropriate repair material according to the CAD/CAM material type should be selected. The CAD/CAM provisional materials have proper mechanical properties for clinical use as compared to conventional materials.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.613-623
• /
• 2022

Hospital textile is a necessary which the patient used everyday, that required constant management between supply and consumption. This study applied the service blue print technique to analyze how to provide and supply hospital textile from the stock to the patients in a tertiary hospital, Seoul, South Korea. There are actual or potential process problems identified such as nurses' increasing workload, patient dissatisfaction, and infection risk. After applying blueprint analysis, we suggest the modified processes to overcome theses identified problems using automatization to provide textile. Expected outcomes may include decreases in patient's waiting time, nurse's textile workload, and lower infection risk as well as increasing process efficiency via systematic supply-demand management.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.446-450
• /
• 2021

Non-dispersive infrared (NDIR) gas sensors typically use an optical filter that transmits a discriminating 4.26 ㎛ wavelength band to measure carbon dioxide (CO2), as CO2 absorbs 4.26 ㎛ infrared. The filter performance depends on the transmittance and full width at half maximum (FWHM). This paper presents the fabrication, sensitivity, and selectivity characteristics of a distributed Bragg reflector (DBR)-based Fabry-Perot filter with a simple structure for CO2 detection. Each Ge and SiO2 films were prepared using the RF magnetron sputtering technique. The transmittance characteristics were measured using Fourier-transform infrared spectroscopy (FT-IR). The fabricated filter had a peak transmittance of 59.1% at 4.26 ㎛ and a FWHM of 158 nm. In addition, sensitivity and selectivity experiments were conducted by mounting the sapphire substrate and the fabricated filter on an NDIR CO2 sensor measurement system. When measuring the sensitivity, the concentration of CO2 was observed in the range of 0-10000 ppm, and the selectivity was measured for environmental gases of 1000 ppm. The fabricated filter showed lower sensitivity to CO2 but showed higher selectivity with other gases.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.516-520
• /
• 2021

During sand casting, the binders produces gases in cores because high temperature molten metals dissolve the binders into gases and causes gas defects in the casting products. In the present study, quantitative analysis of inorganic binder gas generation was performed using Thermo Gravimetry (TG) and Mass Spectrometer (MS) analyses. The specimen was prepared using organic binders in liquid and solid state, and a mixture of sand and binders. Moisture loss by catalysts was calculated by TG results from liquid and solid binder specimens; it was found that components of gases were different. Quantitative analysis was discussed for generated gases with individual gas component results obtained using TG and MS. It is expected that gas generation can be predicted in the casting simulation using the technique proposed in the present study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.504-508
• /
• 2022

Single crystal gallium oxide (Ga₂O₃) has been an emerging material for power semiconductor applications. However, the defect distribution of Ga₂O₃ substrates needs to be carefully characterized to improve crystal quality during crystal growth. We analyzed the type and the distribution of defects on commercial (-201) Ga₂O₃ substrates to get a basic standard prior to growing Ga₂O₃ crystals. Etch pit technique was employed to expose the type of defects on the Ga₂O₃ substrates. Synchrotron white beam X-ray topography was also utilized to observe the defect distribution by a nondestructive manner. We expect that the observation of defect distribution with three-dimensional geometry will also be useful for other crystal planes of Ga₂O₃ single crystals.

• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.141-151
• /
• 2022

Soil seed banks as natural storage of plant seeds play an important role in the maintenance and regeneration of watershed. Natural regeneration potential of the soil seed bank of Land use types (LUTs) in Ogun River watershed (ORW) was investigated. ORW was stratified using proportionate sampling technique into Guinea Savannah (GS), Rainforest (RF) and Swamp Forest (SF) Ecological Zones (EZs). Three LUTs: Natural Forest (NF), Disturbed Forest (DF) and Farmland (FL) were purposively selected in GS: GSNF, GSDF, GSFL; RF: RFNF, RFDF, RFFL and SF: SFNF, SFDF, SFFL, respectively. Systematic line transects was used in the laying of the sample plots. Sample plots of 25 m×25 m were established in alternate positions. Ten 1 m×1 m quadrats were randomly laid for soil core sampling from previously randomly selected ten plots. The core samples (10) were pooled per plot in each LUT and placed in individual trays. Ten trays with sterilized soil were used as control. The trays were watered regularly and checked for seedlings emergence fortnightly for 18 months. The experimental design used was 3×3 factorial experiments. ANOVA, Diversity index (H') and Similarity index (SI) were used to analyze the data. There was significant difference in seedling emergence among ecological zones and land use types (p<0.05). A total of 4,400 seedlings emerged from the soil samples. All species were distributed among 32 families. FL in the RF had the highest number of germinated seeds (705±37.33 seedlings) followed by DF in the RF (701±49.6 seedlings). The lowest emergence was in NF of the SF (199±28.41 seedlings). DF in the RF had highest number of species (34) distributed among 22 families. Emergence from soil seed bank of NF in ORW was generally with more of tree species than herbs that were predominant in FL and DF.

• The Korea Journal of Herbology
• /
• v.28 no.6
• /
• pp.95-100
• /
• 2013

Objectives : The purpose of this study was to investigate antiaging and antioxidant effects on cultured human skin fibroblast with supercritical fluid extracts of Dendropanax morbifera, Corni fructus and Lycii Fructus. Methods : Supercritical fluid extraction (SFE) technique was applied to extract from three medicinal plants including stem of Dendropanax morbifera, Corni fructus and Lycii Fructus. Antioxidant activity of extract was evaluated by two different assays as 2,2-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and super oxide dismutase (SOD) like activities. These extracts were tested for cell viability on HS68 skin fibroblast by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) assay. We investigated the effects of Ultraviolet-B irradiation on cytotoxicity, type 1 collagen, elastin level and oxidative damage in cultured human skin fibroblast (HS68). Recently, many studies have reported that elastin is also involved in inhibiting or repairing wrinkle formation, although collagen is a major factor in the skin wrinkle formation. Results : The extracts obtained dose-dependently increased the scavenging activity on DPPH radical scavenging activity and SOD like activity. The supercritical fluid extracts of complex herbal medicine showed low cytotoxicity as more than 100% cell viability in 100ppm/ml concentration. HS68 fibroblasts were survived 70% at $120mJ/cm^2$ UVB irradiation and treated tumor necrosis factor (TNF)-alpha. The levels of aging factors and cytotoxicity were decreased by supercritical fluid extract of complex herbal medicine. Conclusions : These results suggest that supercritical fluid extracts may have value as the potential antioxidant and antiaging medicinal plant.