• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2008

상태 공간 평균화법을 이용하여 절연형 inverse-SEPIC(Isolated Inverse-SEPIC)의 동적 모델링을 정립하고, 그 제어특성을 해석한다. 정상 상태 해석을 통해 회로의 주요 소자들에 대한 설계식을 유도한다. 근 궤적과 주파수 해석을 통해 II-SEPIC의 동특성 및 제어 특성을 파악하여, 적절한 제어성능을 가지는 제어기를 설계한다. 본 논문에서 제시하는 방법에 따라 설계된 II-SEPIC의 회로파라미터 및 전압제어기를 포함한 전체 제어시스템의 시뮬레이션과 실험을 수행한다. 시뮬레이션과 실험결과는 논문에서 제시한 모델링 및 제어기 설계방법의 타당성 및 유용성을 확인시켜 주고 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.26-28
• /
• 2007

Design equations of II-SEPIC (Isolated Inverse-SEPIC) are derived and its dynamic model is also made using state-space averaging method in this paper. II-SEPIC is comprehensively investigated through the frequency response analysis, compared with those of I-SEPIC (Isolated SEPIC).

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.447-454
• /
• 2016

A single-ended primary-inductor converter (SEPIC) features low input current ripple and output voltage up/down capability. However, the switching devices in a two-level SEPIC suffer from high voltage stresses and switching losses. To cope with this drawback, this study proposes a three-level SEPIC that uses a low voltage-rated switch and thus achieves better switching performance compared with the two-level SEPIC. The three-level SEPIC can reduce switch voltage stresses and switching losses. The converter operation and control method are described in this work. The experimental results for a 500 W prototype converter are also discussed. Experimental results show that unlike the two-level SEPIC, the three-level SEPIC achieves improved power efficiency with balanced capacitor voltages.

• 조명전기설비학회논문지
• /
• 제17권4호
• /
• pp.20-25
• /
• 2003

본 논문은 기존 전자식 안정기에 사용되던 Boost 컨버터 형태의 역률 개선 부분을 SEPIC 컨버터 형태를 갖는 역률 개선 방식으로 대치하여 특성을 확인한 논문이다. Boost 컨버터 형태를 갖는 역률 개선 방식의 출력 DC 전압은 일반적으로 400[V]이며, 최소 전압은 입력 전원의 실효값 이상이어야만 한다. 하지만 SEPIC 컨버터 구조를 이용하면, 역율 개선 효과뿐만 아니라, 입력 전원의 실효값 보다 작은 출력 DC 전압을 얻을 수 있다는 장점을 가지고 있다. 본 논문에서는 SEPIC 컨버터 구조를 갖는 역율 개선 방식과 링코어를 이용한 자려식 발진 방식을 적용한 전자식 안정기를 제작하였고, 낮은 출력 전압을 이용하여 소자의 용량과 크기를 감소시켰다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.107-110
• /
• 2001

The capacitive idling SEPIC(Single Ended primary Inductance Converter) is derived from the SEPIC topology. This converter is suitable for maximizing Li-Ion battery life in portable equipments. Besides, that makes it possible to increase the switching frequency without a additional circuitry This paper is presented the characteristics of the capacitive idling SEPIC and experimental waveforms of the devices in continuous current mode.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.330-334
• /
• 2004

A new SEPIC-Flyback converter is proposed. The proposed converter is the integration of SEPIC and Flyback converter. Not only SEPIC output but also Flyback output could be fully regulated by constant frequency PWM control. Merged SEPIC and Flyback topology can share the transformer and power MOSFET. When the switch turns on, one topology operates via capacitive energy transfer. The other topology acts as inductive energy transfer while the switch is off. So, it can increase power density per one cycle. The experimental result is presented and verified.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.526-529
• /
• 2004

A new SEPIC-Flyback convater is proposed. The proposed converter is the superposition of SEPIC and Flyback converter. Not only SEPIC output but also Flyback output could be fully regulated by constant frequency PWM control. Merged SEPIC and Flyback topology could share the transformer and power MOSFET. When the switch turns of one topology operates via capacitive energy transfer. Another topology acts as powering mode while the switch is off. So, it could increase power falsify per one cycle. The operating principle of the proposed converter is described below. Prototype featuring 24V input 48V output, 100kHz switching frequency, and 100W output is simulated under the proposed topology.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.26-35
• /
• 2009

A high efficiency active clamp sepic-flyback converter is presented for fuel cell generation systems. The proposed converter is a superposition of a sepic converter mode and. flyback converter mode. The output voltages of the sepic converter mode and flyback converter mode can be regulated by the same PWM technique with constant frequency. By merging the sepic and flyback topologies, they can share the transformer, power MOSFET and active clamp circuit. The result has outstanding advantages over conventional active clamp DC-DC converters: high efficiency, high power density, and component utilization. Simulation results and experimental results are presented to verify the principles of operation for the proposed converter.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.649-660
• /
• 2014

A novel non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents is proposed and characterized in this study. Two auxiliary switches and an inductor are added to the original bidirectional SEPIC/ZETA components to form a new direct power delivery path between input and output. The proposed converter can be operated in the forward SEPIC and reverse ZETA modes with reduced ripple currents and increased voltage gains attributed to the optimized selection of duty ratios. All switches in the proposed converter can be operated at zero-current-switching turn-on and/or turn-off through soft current commutation. Therefore, the switching and conduction losses of the proposed converter are considerably reduced compared with those of conventional bidirectional SEPIC/ZETA converters. The operation principles and characteristics of the proposed converter are analyzed in detail and verified by the simulation and experimental results.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.285-293
• /
• 2004

본 논문에서는 능동역률보상(PFC)의 구조를 가진 SEPIC 컨버터를 이용한 무전극 형광램프(electrodeless fluorescent lamps)용 전자식 안정기를 제안하였다. SEPIC 컨버터는 입력 전류의 낮은 고조파와 고역률의 특성을 가진다. 제안된 제어방법으로는 UC3854의 적분회로를 이용한 것으로 이 기술은 전류연속모드로 동작하는 역률보상 및 과전류보호를 제공하는 매우 간단한 제어 회로이다. 제안된 무전극 형광램프용 전자식 안정기는 3개의 무전극 형광램프용으로 설계되어 기존의 무전극 형광램프용 전자식 안정기보다 에너지 및 제작비 절약 효과가 크다. 제안된 안정기의 특성을 측정하기 위해 실험을 실시하였으며 이를 통해 고역률과 낮은 THD를 확인하였다.