• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.225-228
• /
• 2002

Amorphous $Ga_2O_3$ films have been grown on Si(100) substrates by metal organic chemical vapor deposition (MOCVD) using gallium isopropoxide, $Ga(O^iPr)_3$, as single precursor. Deposition was carried out in the substrate temperature range 400-800 $^{\circ}C$. X-ray photoelectron spectroscopy (XPS) analysis revealed deposition of stoichiometric $Ga_2O_3$ thin films at 500-600 $^{\circ}C$. XPS depth profiling by $Ar^+$ ion sputtering indicated that carbon contamination exists mostly in the surface region with less than 3.5% content in the film. Microscopic images of the films by scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed formation of grains of approximately 20-40 nm in size on the film surfaces. The root-mean-square surface roughness from an AFM image was ${\sim}10{\AA}$. The interfacial layer of the $Ga_2O_3$/Si was measured to be ${\sim}35{\AA}$ thick by cross-sectional transmission electron microscopy (TEM). From the analysis of gaseous products of the CVD reaction by gas chromatography-mass spectrometry (GC-MS), an effort was made to explain the CVD mechanism.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.956-960
• /
• 2010

CuO doped $WO_3-SnO_2$ thick film gas sensors were fabricated by screen printing method on alumina substrates and heat-treated at $350^{\circ}C$ in air. The effects of mixing ratio of $WO_3$ with $SnO_2$ on the structural and morphological properties of $WO_3-SnO_2$ were investigated X-ray diffraction and Scanning Electron Microscope. The structural properties of the $WO_3-SnO_2$:CuO thick film by XRD showed that the monoclinic of $WO_3$ and the tetragonal of $SnO_2$ phase were mixed. Nano CuO was coated on the $WO_3-SnO_2$ surface and then the surface of $WO_3$ was coated with $SnO_2$ particles with $1\sim1.5{\mu}m$ in diameters, as confirmed form the SEM image. The sensitivity of the $WO_3-SnO_2$:CuO sensor to 2000 ppm $CO_2$ gas and 50 ppm $H_2S$ gas for the various ratio of $WO_3$ and $SnO_2$ was investigated. The 4 wt% CuO doped $WO_3-SnO_2$(75:25) tkick films showed the highest sensitivity to $CO_2$ gas and $H_2S$ gas.

• 한국콘텐츠학회논문지
• /
• 제11권12호
• /
• pp.395-402
• /
• 2011

최근 기업의 사회적 책임(Corporate Social Responsibility: CSR)은 지속 가능한 경영 및 긍정적인 기업 이미지의 형성을 위해 필수적인 기업 활동이 되었다. 그러나 CSR 활동이 기업 수준에서 기업 성과에 미치는 효과 연구는 많이 이루어졌으나, 제품 수준의 마케팅 성과로서 브랜드 자산에 미치는 효과와 관련한 연구는 미진하였다. 이에 본 연구에서는 냉장고 기업의 CSR 활동과 브랜드 자산과의 관계를 실증하고, CSR 활동과 브랜드 자산의 관계에 있어 제품 및 서비스 품질 평가의 매개 효과를 구조방정식 모형을 통해 파악하였다. 연구결과, CSR 활동은 제품 및 서비스 품질 평가, 브랜드 자산에 긍정적인 영향을 미치는 것으로 나타났다. 특히 CSR 활동은 브랜드 자산에 직접적으로 긍정적인 영향을 미칠 뿐만 아니라, 제품 및 서비스 품질 평가를 통해 브랜드 자산에 간접적으로 더 큰 긍정적인 영향을 미치는 것으로 나타났다. 이러한 연구 결과를 토대로 실무적이고 이론적인 시사점과 향후 연구 방향에 대하여 논의하였다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.178-191
• /
• 2003

OMC is essentialiy necessary compound in sun goods as organic UV protecting products. But the skin-trouble problem is raising because of skin penetration of OMC. In this study, non-capsulated pure OMC was compared with Organic-Inorganic-Nano-hybrid OMC for skin penetration force and SPF degree. Organic- Inorganic Nano-Hybrid OMC is OMC trapped in the pore of the mesoporous silica synthesized by the sol-gel method after OMC is nanoemulsified in the system of the hydrogenated Lecithin/ Ethanol/caprylic/capric triglyceride/OMC/water. OMC- nano- emulsion was obtained by a microfluidizing process at 1000bar and then micelle size in the nanoemulsion solution is 100-200nm range. Mesoporous silica nano-hybrid OMC was prepared by the process; surfactant was added in dissolved OMC-Nanoemulsion, then the rod Micelle was formed. OMC-nanoemulsion was capsulated in this rod Micelle and then silica precursor was added in the OMC-nanoemulsion solution. Through the hydrolysis reaction of the silica precursor, mesoporous silica concluding OMC-Nanocapsulation was obtained. The nano-hybrid surface of this OMC-Nanoemulsion-Inorganic system was treated with polyalkyl-silane compound. OMC-Mesoporous silica Nano-hybrids coated with polyalkyl-silane compound show the higher sun protecting factor (SPF Analyzer: INDEX 10-15) than pure OMC and could reduce a skin penetration of OMC. The physico-chemical properties of these nano-hybrids measured on the SPF index, partical size, strcture, specific surface area, pore size, morphology, UV absorption, rate of the OMC dissolution using SPF Analyzer, Laser light scattering system, XRD, BET, SEM, chroma Meter, HPLC, Image analyzer, microfluidizer, UV/VIS. spectrometer.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1356-1361
• /
• 2004

High temperature superconducting coated conductor has a structure of ///. The buffer layer consists of multi-layer, this study reports the deposition method and optimal deposition conditions of YSZ(Yttria-stabilized zirconia) layer which plays a important part in preventing the elements of substrate from diffusing into the superconducting layer. YSZ layer was deposited by DC reactive sputtering technique using water vapor for oxidizing deposited elements on substrate. To investigate optimal thickness of YSZ film, four YSZ/CeO$_2$/Ni samples with different YSZ thickness(130 nm, 260 nm, 390 nm, and 650 nm) were prepared. The SEM image showed that the surface of YSZ layer was getting to be rougher as YSZ layer was getting thicker and the growth mode of YSZ layer was columnar grain growth. After CeO$_2$ layer was deposited with the same thickness of 18.3 nm on each four samples, YBCO layer was deposited by PLD method with the thickness of 300 nm. The critical currents of four samples were 0, 6 A, 7.5 A, and 5 A respectively. This shows that as YSZ layer is getting thicker, YSZ layer plays a good role as a diffusion barrier but the surface of YSZ layer is getting rougher.

• Composites Research
• /
• 제32권6호
• /
• pp.307-313
• /
• 2019

Triboelectric nanogenerators (TENGs)는 정전기 기반의 마찰 전기 발전기로써 간단한 구조로 저비용, 대면적으로 손쉽게 활용할 수 있는 기술이다. 본 연구에선 생활 용품을 활용하여 화학적 결합 및 SEM image로써 분석을 하고 C-C/C-H/C-O/C=O bonding에 따라 bonding 조성비에 따라 C-C bonding의 비율이 클수록 음전하, C-H bonding 비율이 클수록 양전하 대전체가 되는 것을 확인하였다. 그러한 특성을 가지고 최적 생활용품을 활용하여 정전 출력 실험을 했을 때 최대 210 V, 14.6 ㎂, 9.83 mW의 출력을 얻었다. 최종적으로, 랩과 마그네틱 노트를 이용해 97개의 Light Emitting Diodes (LEDs)를 점등할 수 있었다.

• 한국식품영양학회지
• /
• 제30권3호
• /
• pp.440-453
• /
• 2017

In this study, we conducted an empirical analysis using structural equation modeling (SEM) by distributing questionnaires to 208 Chinese tourists who constitute the largest proportion of foreign tourists visiting South Korea. The survey was conducted in a face to face (FTF) manner with the aim to contribute to globalization of Korean cuisine through comprehensive analysis of the effects of preference characteristics of Korean wave dramas on the relationship among images, attitudes, and purchase intentions for Korean cuisine. The main actor characteristics among the preference characteristics of Korean wave dramas had a significant effect on the attitudes and purchase intentions for Korean cuisine. However, the thematic characteristics among the preference characteristics of Korean wave dramas did not have a significant effect on the purchase intentions for Korean cuisine; in addition, the production characteristics did not have a significant effect on the attitudes and purchase intentions for Korean cuisine. The eco-friendly and health images of Korean cuisine had a significant effect on the purchase intentions for Korean cuisine, and the attitudes toward Korean cuisine significantly affected the purchase intentions for Korean cuisine. Based on the results of this study, it is considered necessary to continuously publicize Korean cuisine through Korean wave dramas to build positive attitudes toward Korean cuisine through enhanced images of Korean cuisine.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• 한국작물학회지
• /
• 제47권3호
• /
• pp.161-166
• /
• 2002

인삼 뿌리에 발생하는 적변현상을 구명하기 위하여 적변삼표피의 형태적 특성, 세균의 밀도 및 무기물 함량의 변화를 조사한 결과, 다음과 같은 결론을 얻었다. 1. 적변삼의 표피는 건전삼에 비하여 두꺼웠으며, 세포벽이 분해되어 심하게 파괴되어 있었다. 그러나 건전삼의 경우에는 세포가 장방형의 일정한 형태를 유지하고 조직의 파괴도 전혀 발생하지 않았다. 2. 파괴된 적변삼의 표피조직에는 막대모양의 세균이 다수 존재하였으며, 세균밀도는 2.9$\times$$10^{6}$-3.5$\times$$10^{7}$ CFU/g(fresh weight)으로 많은 세균이 분리되었다. 건전삼표피조직에서는 세균이 거의 관찰되지 않았으나, 세균밀도는 4.7$\times$$10^2$-1.2$\times$$10^3$ CFU/g(fresh weight)으로 적변삼에 비하여 매우 낮게 나타났다. 3. 인공적으로 분리세균을 접종하여 적변을 유발시킨 표피조직에서도 자연발생 적변삼에서와 동일한 표피조직의 파괴양상을 보였으며, 다수의 세균이 관찰되었다. 4. 적변삼의 표피조직에서는 Al, Si 및 Fe의 함량이 높았으나, 건전삼에서는 K의 함량이 높게 나타나 적변현상의 발생은 표피조직에서 무기물 함량의 변화를 유발하였다