• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.1003-1011
• /
• 1996

Hydroxyapatite powder was synthesized by a citrate method, . Char-like precursor composed of Ca8(HPO4)2(PO4)4.5H2O (OCP) and CaCo3 was found via viscous resin-like intermediate by heating the mixed aqueous solution of Ca(NO3)2.4H2O(NH4)2HPO4 and citric acid. Resulted powder was transformed into hydroxyapatite phase by firing over 120$0^{\circ}C$-135$0^{\circ}C$ for 4 hr using the powder calcined at 90$0^{\circ}C$ for 10 hr composed of mostly single hydroxyapatite phase. The sintered densities increased with firing temperature up to 130$0^{\circ}C$ but the highest relative density was about 94% of theoritical value. indicating the presence of closed pores. The maximum 96 MPa of flexural strength was obtained at 120$0^{\circ}C$ firing but the flexural strength showed lower values over the above sintering condition. Vitro test was performed by immersing of two jointed specimens in SBF for seven days and adhesion was observed between two specimens.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2452-2463
• /
• 2018

Surface treatment of sol-gel bioglass is required to increase its biomedical applications. In this study, a dielectric barrier discharge (DBD) plasma treatment in atmospheric pressure was performed on the surface of [$SiO_2-CaO-P_2O_5-B_2O_3$] sol-gel derived glass. The obtained bioglass was treated by plasma using discharge current 12 mA with an exposure period for 30 min. The type of discharge can be characterized by measuring the discharge current and applied potential waveform and the power dissipation. Apatite formation on the surface of the DBD-treated and untreated samples after soaking in simulated body fluid (SBF) at $37^{\circ}C$ is characterized by Fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), inductively coupled plasma (ICP-OES) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM/EDS). We observed a marked increase in the amount of apatite deposited on the surface of the treated plasma samples than those of the untreated ones, indicating that DBD plasma treatment is an efficient method and capable of modifying the surface of glass beside effectively transforming it into highly bioactive materials.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.492-498
• /
• 2018

In this study, a sea shell was converted into bioceramic phases at three different sintering temperatures ($450^{\circ}C$, $850^{\circ}C$, $1000^{\circ}C$). Among the obtained bioceramic phases, a valuable ${\beta}-TCP$ was produced via mechanochemical conversion method from sea snail Turritella terebra at $1000^{\circ}C$ sintering temperature. For this reason, only the bioceramic sintered at $1000^{\circ}C$ was concentrated on and FT-IR, SEM/EDX, BET, XRD, ICP-OES analyses were carried out for the complete characterization of ${\beta}-TCP$ phase. Biodegradation test in Tris-buffer solution, bioactivity tests in simulated body fluid (SBF) and cell studies were conducted. Bioactivity test results were promising and high rate of cell viability was observed in MTT assay after 24 hours and 7 days incubation. Results demonstrated that the produced ${\beta}-TCP$ bioceramic is qualified for further consideration and experimentation with its features of pore size and ability to support bone tissue growth and cell proliferation. This study suggests an easy, economic method of nanobioceramic production.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.881-886
• /
• 2009

Research into the replacement of injured systems and tissue in the human body is advancing rapidly. Recently, Ti-Ni shape memory alloys have shown excellent biofunctionality related to their shape memory effect and superelasticity. In this study, the effect of an acid or an alkali treatment on the bioactivity in 49Ti-Ni and 51.5Ti-48.5Ni alloys is investigated in an effort to utilize Ti-Ni alloy as a biomaterial. In addition, the biocompatibility in a SBF solution is assessed through in vitro testing. A porous surface was formed on the surface of both alloys after a chemical treatment. According to the in vitro test, apatite formed on the surfaces of both alloys. The forming rate of apatite in the Ti-rich alloy was faster that in the Ni-rich alloy. The formation of apatite provided proof of the bioactivity of the Ti-Ni alloy. A small quantity of Ni was eluted at the initial stage, whereas Ni was not found for 12 days in the Ti-rich alloy and for 8 days in the Ni-rich alloy. In the case of the treated 51.5Ti-Ni alloy, the shape memory property was worsened but the biocompatibility was improved.

• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.206-210
• /
• 2018

에나멜 기법을 활용하여 Ti6Al4V 합금에 두 종류의 생체활성화 유리를 코팅하였다. 재료간의 열팽창계수 차이에 의한 열응력을 줄이기 위해 재료간의 열팽창계수의 차가 $2{\times}10^{-6}/^{\circ}C$ 정도 되도록 생체활성화 유리 조성을 선정하였다. 열팽창계수의 차이에도 불구하고 Ti6Al4V 합금과 코팅 유리간에 확산결합에 의해 양호한 부착이 형성되었음을 FE-SEM과 EDS 분석으로 확인하였다. 의사체액에 담근 후 코팅 표면에 일반적인 생체활성화 유리와 같은 hydroxycarbonate apatite가 형성됨을 FT-IR로부터 확인하였다.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.139-143
• /
• 2005

Cytochrome P450 14${\alpha}$-sterol demethylase enzyme (CYP51) is the target a of azole type antifungals. The azole blocks the ergosterol synthesis and thereby inhibits fungal growth. A three-dimensional (3D) homology model of CYP51 from Candida albicans was constructed based on the X-ray crystal structure of CYP51 from Mycobacterium tuberculosis. Using this model, the binding modes for the substrate (24-methylene-24, 25-dihydrolanosterol) and the known inhibitors (fluconazole, voriconazole, oxiconazole, miconazole) were predicted from docking. Virtual screening was performed employing Structure Based Focusing (SBF). In this procedure, the pharmacophore models for database search were generated from the protein-ligands interactions each other. The initial structure-based virtual screening selected 15 compounds from a commercial available 3D database of approximately 50,000 molecule library, Being evaluated by a cell-based assay, 5 compounds were further identified as the potent inhibitors of Candida albicans CYP51 (CACYP51) with low minimal inhibitory concentration (MIC) range. BMD-09-01${\sim}$BMD-09-04 MIC range was 0.5 ${\mu}$g/ml and BMD-09-05 was 1 ${\mu}$g/ml. These new inhibitors provide a basis for some non-azole antifungal rational design of new, and more efficacious antifungal agents.

• 한국결정학회지
• /
• 제4권1호
• /
• pp.18-24
• /
• 1993

백금-안티모니갔의 상평형 및 안정 화합물에 대한 연구를 위해 합성실험을 실시하였다. 반응생성물은 반 사현미경, X-선 회절분석, 전자현미분석 등으로 규명하 였다. 백금-안티모니계에는 Pt5Sb, Pt3Sb, Pt3Sb2, PtSb, PtSb5등 5종류의 화합물이 존재하며 Pt5Sb2는 존재하지 않는 것으로 밝혀졌다. Pt5Sb는 처음 발견된 화합물로서 83at.%Pt의 화학성분을 가지며, 정방정계와 격자상수 a=3.948(3), c=16.85(1)차를 가진다. Ptssb 의 X-선회절 분말자료는 a=3.9455(7), c=16.959(5) A 인 정방정계의 구조로 격자지수화가 가능하다. PtSb의 화학성분은 800연까지 50at.% Pt이나 10반종에서는 49at.%정 회이다. 백금속의 안티모니 고용한계는 1000°, 800°, 600°에서 각각 7.5, 10.0, 6.1at.%이다. Ptsb2와 Sb를 잇는 액상곡선의 형태도 수정되었다.

• Journal of Nutrition and Health
• /
• 제36권8호
• /
• pp.841-850
• /
• 2003

Soy-based formula has been used for centuries in Korea. Soybeans contain phytochemicals with a biochemically active component, isoflavone. Isoflavone is a kind of phytoestrogens, structurally and functionally similar to estrogen. This study was conducted to investigate the effects of soy-based infant formula on growth, development, and isoflavone concentration in the plasma and urine. Thirty-nine healthy infants who were delivered at K university medical center were recruited. Experimental groups were the breast milk group (n = 15, BM) who were fed breast milk, soy-based formula group (n = 10, SBF) who were fed soy-based infant formula, and the casein-based formula group (n = 14, CBF) who were fed casein-based infant formula for 4 months. HPLC analysis was used to measure the concentration of isoflavones. The measurements of infant weight, length, head circumference and chest circumference were all in the normal growth range and were similar among the experimental groups. No significant differences were found in the scores of total mean of infant development test (Development Quotient, DQ) among the experimental groups. The isoflavone content of soy-based formula was significantly higher than. that of breast milk and casein-based formula. Plasma concentration of daidzein and genistein in the infants fed soy-based formula (daidzein : 264.1 ng/ml, genistein : 392.1 ng/ml) was significantly higher (p<.0001) than that in infants fed breast milk (daidzein : 3.4 ng/ml, genistein : 3.8 ng/ml) and casein-based formula (daidzein: 8.1 ng/ml, genistein: 9.3 ng/ml). Also, urinary daidzein and genistein concentrations in infants fed soy-based formula (daidzein: 19.82 $\mu$g/ml, genistein : 17.89 $\mu$g/ml) were significantly higher (p<.001) than those in infants fed breast milk (daidzein: 0.28 $\mu$g/ml, genistein : 0.22 $\mu$g/ml) and casein-based formula (daidzein : 0.45 $\mu$g/ml, genistein : 0.33 $\mu$g/ml).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.53.1-53.1
• /
• 2011

Bioactive glass powders were synthesized by hydrothermal chemical route by the use of ultrasonic energy irradiation. We used sodalime, calcium nitrate tetra hydrate and di ammonium hydrogen phosphate as the precursor material to synthesize $SiO_2$ rich bio-active glass materials. The $SiO_2$ content was varied in the precursor mixture to 60, 52 and 45 mole%. Dense compacts were obtained by microwave sintering at $1,100^{\circ}C$. Mechanical properties were characterized for the fabricated dense bioactive glasses and were found to be comparable with conventional CaO-$SiO_2$-$Na_2O$-$P_2O_5$ bioactive glass. Detailed biocompatibility evaluation of the glass composition was investigated by in-vitro culture of MG-63 cell and mesenchyme stem cell. Cell adhesion behavior was investigated for both of the cell by one cell morphology for 30, 60 and 90 minutes. Cell proliferation behavior was investigated by culturing both of the cells for 1, 3 and 7 days and was found to be excellent. Both SEM and confocal laser scanning microscopy were used for the investigation. Western blot analysis was performed to evaluate the bimolecular level interaction and extent and rate of specific protein expression. The ability to form biological apatite in physiological condition was observed with simulated body fluid (SBF). In-vivo bone formation behavior was investigated after implanting the materials inside rabbit femur for 1 and 3 month. The bone formation behavior was excellent in all the bioglass compositions, specially the composition with 60% $SiO_2$ content showed most promising trend.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.277-284
• /
• 2006

The alloys were prepared by a non-consumable vacuum arc melting and homogenized at $1050^{\circ}C$ for 24 hrs. Two kind of surface modifications were performed alkali treatment in 5.0M NaOH solution subsequent and heat treatment in vacuum furnace at $600^{\circ}C$, and were oxidizing treatment at the temperature range of 550 to $750^{\circ}C$ for 30 minutes. After surface modification, these samples were soaked in SBF which consists of nearly the same ion concentration as human blood plasma. Cytotoxicity tests were performed in MTT assay treated L929 fibroblast cell culture, using indirect methods. A porous and thin activated layer was formed on Titanium and Ti-8Ta-3Nb alloy by the alkali treatment. A bone-like hydroxyapatite was nucleated on the activated porous surfaces during the in vitro test. However, Ti-8Ta-3Nb alloys showed better bioactive properties than Titanium. According to XRD results, oxide layers composed of mostly $TiO_2$(rutile) phases. Cytotoxicity test also revealed that moderate oxidation treatment lowers cell toxicity and Ti-8Ta-3Nb alloy showed better results compared with Titanium.