• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.251-255
• /
• 2015

Thermal deformation, such as bending and twisting, occurs among the polymer parts of air-conditioner indoor units because of repetitive temperature change during heating operation. In this study, a numerical method employing finite-element analysis to efficiently simulate the thermal deformation of an assembly is proposed. Firstly, the displacement of an actual assembly produced by thermal deformation was measured using a 3D optical measurement system. The measurement results indicated a general downward sag of the assembly, and the maximum displacement value was approximately 1 mm. The temperature distribution was measured using a thermographic camera, and the results were used as initial-temperature boundary conditions to perform temperature-displacement analysis. The simulation results agreed well with the measured data. To reduce the thermal deformation, the stiffness increased 100%. As the results, the maximum displacement decreased by approximately 5.4% and the twisting deformation of the holder improved significantly.

• Preventive Nutrition and Food Science
• /
• 제11권2호
• /
• pp.146-154
• /
• 2006

Structural modification of corn starch by gamma irradiation was evaluated for under dry conditions at varied intensities from 0 to 40 kGy. Under scanning electron microscopy, the granule shape of corn starch was not significantly affected by the irradiation up to 40 kGy. In addition, X-ray diffraction and melting patterns of the irradiated starches were similar to those of the native starch, indicating that crystalline regions in the starch granules were not changed by irradiation. However, the pattern of gel permeation column chromatography showed a significant increase in partial hydrolysis of gamma irradiated starch samples. The degree of polymerization and the paste viscosity of irradiated starch samples dose-dependently decreased significantly with irradiation, and increased solubility and clarity were observed in the irradiated starch solution. In addition, the degree of retrogradation decreased as irradiation dose increased. Irradiation of corn starch has advantages over the ordinary acid or the enzyme hydrolysis modification methods. It does not affect the granular shape and crystalline phase of starch during hydrolysis, and the process can be carried out in dry state.

• 한국공간구조학회논문집
• /
• 제16권2호
• /
• pp.89-96
• /
• 2016

Cable structures are lightweight structures of flexible type, cable members have only axial stiffness related to tension, they can carry neither bending nor compression. This study is the analysis of cable truss systems are composed of upper and low cables by connecting bracing cables, the structural principle is based on a tensegrity system by using bracing tension members, discontinuous compression members and continuous tension members. A hanging roof of cable truss system is too flexible against vertical loads, most cable members are stabilized by connecting the prestressed upper and lower cable by bracing cables. A cable truss roof system is formed by adding a set of cables with reverse curvature to the suspension cables. With the sets of cables having opposite curvature to each other, cable truss is able to carry vertical load in both upward and downward direction with equal effectiveness, and then a cable truss acts as load bearing elements by the assemble of ridge cables, valley cables and bracing cables. This paper will be shown the geometric non-linear analysis result of cable truss systems with various sag ratio for deflections and tensile forces, the analytical results are compared with the results of other researchers.

• 전기학회논문지P
• /
• 제64권2호
• /
• pp.79-84
• /
• 2015

Voltage sags are considered the dominant disturbances affecting power quality. Dynamic voltage restorers(DVRs) are mainly used to protect sensitive loads from the electrical network voltage disturbances such as sags or swells and could be used to reduce harmonic distortion of ac voltages. The typical DVR topology essentially contains a PWM inverter with LC Filter, an injection transformer connected between the ac voltage line and the sensitive load, and a DC energy storage device. For injecting series voltage, the PWM inverter is used and the passive filter consist of inductor(L) and capacitor(C) for harmonics elimination of the inverter. However there are voltage pulsation responses by the characteristic of the LC passive filter that eliminate the harmonics of the PWM output waveform of the inverter. Therefore, this paper presented design and feedback performance of LC filter used in the DVRs. The voltage control by LC filter should be connected in the line side since this feedback method allows a relatively faster dynamic response, enabling the elimination of voltage notches or spikes in the beginning and in the end of sags and strong load voltage THD reduction. Illustrative examples are also included.

• 영재교육연구
• /
• 제12권2호
• /
• pp.17-29
• /
• 2002

본 연구는 초등학교 수학${\cdot}$과학 영재아동의 성역할 정체감을 일반아동과 비교하여 영재아동의 심리적 특성을 살펴보는데 그 목적이 있다. 설문 조사를 통해 영재아동 192명과 일반아동 128명의 성역할 정체감을 살펴본 결과 영재아동의 성역할 정체감 유형이 양성성 유형은 높게 미분화 유형은 낮게 나타났다. 영재아동은 일반 아동에 비하여 자신의 성역할을 빨리 인식하고 있으며 일반아동보다는 자유로운 양성성적인 성향을 나타냈다.

• 한국결정성장학회지
• /
• 제17권1호
• /
• pp.6-10
• /
• 2007

R-plane 사파이어 위에 a-plane GaN층이 성장된 기판에 혼합소스 HVPE(mixed-source hydride vapor phase epitaxy) 방법으로 GaN/InGaN의 이종접합구조(heterostructure)를 구현하였다. GaN/InGaN 이종접합구조는 GaN, InGaN, Mg-doped GaN 층으로 구성되어 있다. 각 층의 성장온도는 GaN층은 $820^{\circ}C$, InGaN 층은 $850^{\circ}C$, Mg-doped GaN 층은 $1050^{\circ}C$에서 성장하였다. 이때의 $NH_3$와 HCl 가스의 유량은 각각 500 sccm, 10 sccm 이었다. SAG-GaN/InGaN 이종접합구조의 상온 EL (electroluminescence) 특성은 중심파장은 462 nm, 반치폭(FWHM : full width at half maximum) 은 0.67eV 이었다. 이 결과로부터 r-plane 사파이어 기판위에 multi-sliding boat system의 혼합소스 HVPE 방법으로 이종접합구조의 성장이 가능함을 확인하였다.

• 한국토양비료학회지
• /
• 제31권2호
• /
• pp.204-210
• /
• 1998

본 시험은 재배이역(栽培履歷)이 서로 상이한 시설재배지에서의 염류집원적지(鹽類集源積地)와 건전지(健全地)의 미생물상(微生物相)의 생태(生態)를 비교해석(比較解析)하고, 미생물(微生物)적 진단(診斷)에 의한 근권환경(根圈環境)의 동태(動態)와 개량기술(改良技術)을 위한 기초자료를 얻고자 수행하였다. 주요 미생물(微生物)의 분포(分布)는 건전지(健全地)에서 형광성(螢光性) Pseudomonas 속 세균(細菌)의 밀도가 높은반면 염류장해지(鹽類障害地)에서는 병원성(病原性) Fuasarium 속의 밀도가 높고 형광성(螢光性) Pseudomonas 속 세균(細菌)이 낮은 분포밀도(分布密度)를 보였다. 토양중 유기물 함량이 증가할수록 Bacillus 속(屬), 형광성(螢光性) Pseudomonas 속(屬), Enterobacteriaceae 등 세균류(細菌類)의 밀도와 Microbial biomass C함량이 크게 증가하였으며, 토양의 전기전도도(電氣傳導度)(EC)가 $5.1dS\;m^{-1}$ 이상으로 높아지면 미생물(微生物)간의 비율중 세균(細菌)/사상균(絲狀菌)(B/F), 방선균(放線菌)/사상균(絲狀菌)(A/F)의 비율이 현저히 낮아지고 형광성(螢光性) Pseudomonas 속(屬) 세균(細菌)이 급격히 감소하였다. 토양 pH와 세균(細菌)과의 관계는 고도의 정(正)의 상관관계(相關關係)를, 사상균(絲狀菌)과는 부(負)의 상관관계(相關關係)를 보였으며, 토양유기물과 방선균(放線菌), Bacillus 속(屬), Enterobacteriaceae와는 각각 $r=0.226^*$, $r=0.334^{**}$, $r=0.276^{**}$, 치환성 Ca및 치환성 Mg함량과 방선균수(放線菌數)와는 각각 $r=0.334^{**}$, $r=0.352^{**}$, 유기물함량과 Microbial biomass C 함량과는 $R=0.439^{**}$의 유의성(有意性) 있는 상관을 보였다.

• Parasites, Hosts and Diseases
• /
• 제52권4호
• /
• pp.367-376
• /
• 2014

Recombinant antigenic proteins of Toxoplasma gondii are alternative source of antigens which are easily obtainable for serodiagnosis of toxoplasmosis. In this study, highly antigenic secretory organellar proteins, dense granular GRA2 and GRA3, rhoptrial ROP2, and micronemal MIC2, were analyzed by bioinformatics approach to express as water-soluble forms of antigenic domains. The transmembrane region and disorder tendency of 4 secretory proteins were predicted to clone the genes into pGEX-4T-1 vector. Recombinant plasmids were transformed into BL21 (DE3) pLysS E. coli, and GST fusion proteins were expressed with IPTG. As a result, GST fusion proteins with $GRA2_{25-105}$, $GRA3_{39-138}$, $ROP2_{324-561}$, and $MIC2_{1-284}$ domains had respectively higher value of IgG avidity. The $rGST-GRA2_{25-105}$ and $rGST-GRA3_{39-138}$ were soluble, while $rGST-ROP2_{324-561}$ and $rGST-MIC2_{1-284}$ were not. $GRA2_{31-71}$, intrinsically unstructured domain (IUD) of GRA2, was used as a linker to enhance the solubility. The $rGST-GRA2_{31-71}-ROP2_{324-561}$, a chimeric protein, appeared to be soluble. Moreover, $rGST-GRA2_{31-71}-MIC2_{1-284}$ was also soluble and had higher IgG avidity comparing to $rGST-MIC2_{1-284}$. These 4 highly expressed and water-soluble recombinant antigenic proteins may be promising candidates to improve the serodiagnosis of toxoplasmosis in addition to the major surface antigen of SAG1.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.163-163
• /
• 1999

MOSFET, MESFET 그리고 MODFET는 Logic ULSIs, high speed ICs, RF MMICs 등에서 중요한 역할을 하고 있으며, 그것의 gate electrode, contact, interconnect 등의 물질로는 refractory metal을 이용한 CoSi2, MoSi2, TaSi2, PtSi2, TiSi2 등의 효과를 얻어내고 있다. 그중 TiSi2는 비저항이 가장 낮고, 열적 안정도가 좋으며 SAG process가 가능하므로 simpler alignment process, higher transconductance, lower source resistance 등의 장점을 동시에 만족시키고 있다. 최근 소자차원이 scale down 됨에 따라 TiSi2의 silicidation 과정에서 C49 TiSi2 phase(high resistivity, thermally unstable phase, larger grain size, base centered orthorhombic structure)의 출현과 그것을 제거하기 위한 노력이 큰 issue로 떠오르고 있다. 여러 연구 결과에 따르면 PAI(Pre-amorphization zimplantation), HTS(High Temperature Sputtering) process, Mo(Molybedenum) implasntation 등이 C49를 bypass시키고 C54 TiSi2 phase(lowest resistivity, thermally stable phase, smaller grain size, face centered orthorhombic structure)로의 transformation temperature를 줄일 수 있는 가장 효과적인 방법으로 제안되고 있지만, 아직 그 문제가 완전히 해결되지 않은 상태이며 C54 nucleation에 대한 physical mechanism을 밝히진 못하고 있다. 본 연구에서는 증착 시 기판온도의 변화(400~75$0^{\circ}C$)에 따라 silicon 위에 DC/RF magnetron sputtering 방식으로 Ti/Si film을 각각 제작하였다. 제작된 시료는 N2 분위기에서 30~120초 동안 500~85$0^{\circ}C$의 온도변화에 따라 RTA법으로 각각 one step annealing 하였다. 또한 Al을 cosputtering함으로써 Al impurity의 존재에 따른 영향을 동시에 고려해 보았다. 제작된 시료의 분석을 위해 phase transformation을 XRD로, microstructure를 TEM으로, surface topography는 SEM으로, surface microroughness는 AFM으로 측정하였으며 sheet resistance는 4-point probe로 측정하였다. 분석된 결과를 보면, 고온에서 제작된 박막에서의 C54 phase transformation temperature가 감소하는 것이 관측되었으며, Al impuritydmlwhswork 낮은온도에서의 C54 TiSi2 형성을 돕는다는 것을 알 수 있었다. 본 연구에서는 결론적으로, 고온에서 증착된 박막으로부터 열적으로 안정된 phase의 낮은 resistivity를 갖는 C54 TiSi2 형성을 보다 낮은 온도에서 one-step RTA를 통해 얻을 수 있다는 결과와 Al impurity가 존재함으로써 얻어지는 thermal budget의 효과, 그리고 그로부터 기대할 수 있는 여러 장점들을 보고하고자 한다.

• 한국의학물리학회지:의학물리
• /
• 제25권2호
• /
• pp.65-71
• /
• 2014

A Varian Portal Dosimetry system was compared to an isocentrically mounted MapCHECK 2 diode array for volumetric modulated arc therapy (VMAT) QA. A Varian TrueBeam STx with an aS-1000 digital imaging panel was used to acquire VMAT QA images for 13 plans using four photon energies (6, 8, 10 and 15 MV). The EPID-based QA images were compared to the Portal Dose Image Prediction calculated in the Varian Eclipse treatment planning system (TPS). An isocentrically mounted Sun Nuclear MapCHECK 2 diode array with 5 cm water-equivalent buildup was also used for the VMAT QAs and the measurements were compared to a composite dose plane from the Eclipse TPS. A ${\gamma}$ test was implemented in the Sun Nuclear Patient software with 10% threshold and absolute comparison at 1%/1 mm (dose difference/distance-to-agreement), 2%/2 mm, and 3%/3 mm criteria for both QA methods. The two-tailed paired Student's t-test was employed to analyze the statistical significance at 95% confidence level. The average ${\gamma}$ passing rates were greater than 95% at 3%/3 mm using both methods for all four energies. The differences in the average passing rates between the two methods were within 1.7% and 1.6% of each other when analyzed at 2%/2 mm and 3%/3 mm, respectively. The EPID passing rates were somewhat better than the MapCHECK 2 when analyzed at 1%/1 mm; the difference was lower for 8 MV and 10 MV. However, the differences were not statistically significant for all criteria and energies (p-values >0.05). The EPID-based QA showed large off-axis over-response and dependence of ${\gamma}$ passing rate on energy, while the MapCHECK 2 was susceptible to the MLC tongue-and-groove effect. The two fluence-based QA techniques can be an alternative tool of VMAT QA to each other, if the limitations of each QA method (mechanical sag, detector response, and detector alignment) are carefully considered.