• 제목/요약/키워드: S-Mode

검색결과 6,340건 처리시간 0.039초

무전극램프 에서의 Hysteresis와 모드 변환 특성 (Hysteresis and Mode Transition in Electrodeless Lamp)

  • 이주호;양종경;이종찬;박대희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1560-1561
    • /
    • 2007
  • Electrodeless fluorescent lamp exhibit two modes of operation : a low density mode in which the power is capacitively coupled to the plasma and which is known as the E-mode, and a higher density mode which is an inductive discharge known as the H-mode. The transition between these two(E to H) mode exhibits hysteresis. It is observed that transition currents change at different frequencies and hysteresis exists not only between the starting and minimum maintaining currents of the electromagnetic mode (H mode) discharge but also between the starting and minimum maintaining currents of the electrostatic mode (E mode) discharge. Hysteresis effect can be important role in dimming system.

  • PDF

GC 분석 시스템의 설정과 그에 따른 감도의 차이: 열탈착 방식 대비 루프주입방식에 의한 황성분의 분석 (Changes in the gas chromatographic sensitivity with its analytical setting: Comparison of TDU and loop-injection system for the analysis of sulfur compounds)

  • 김기현;최여진;김성천
    • 분석과학
    • /
    • 제18권1호
    • /
    • pp.66-73
    • /
    • 2005
  • 본 연구에서는 주요 환원황 화합물에 해당하는 4가지 황성분, $H_2S$, $CH_3SH$, DMS, DMDS을 이용하여, 이들의 주요 검출방법에 해당하는 GC/PFPD 방식의 검출특성을 대부분의 환경시료의 분석에 활용할 수 있는 두 가지 기준에서 비교 분석하였다. 우선 수 십 ppb 단위의 고농도 시료들에 대한 분석특성을 이해하기 위해, GC/PFPD에 루프주입장치를 결합한 고농도 모드 시스템을 구성하고, 이에 대한 평가를 시도하였다. 그리고 이에 대비하여, 열탈착 시스템을 연계한 저농도 모드 시스템을 이용하여, 환경대기와 같이 극단적으로 낮은 농도 (ppt 수준)로 존재하는 시료들의 분석기법을 평가하였다. 양 분석방식의 비교에 의하면, 개별 황성분들의 검출특성은 대단히 규칙적인 특성을 유지하는 것으로 나타났다. 고농도모드를 이용한 비교결과에 의하면, 황화수소의 경우 가장 약한 감도를 보인 반면, 황원소를 두개 함유한 DMDS는 가장 민감한 감도를 보였다. 고농도 모드에 대비하여 저농도 모드의 감도를 비교할 경우, 감도가 수십 배 수준으로 감소하는 것으로 나타났다. 양 방식의 뚜렷한 감도차이에도 불구하고, 선택한 모드에 상관없이 황성분들의 상대적인 검량특성은 비교적 규칙적인 경향성이 유지되는 것으로 나타났다. 이들 성분에 대한 정확한 검량을 위해서는 다양한 관점에서 검출특성을 정의하기 위한 노력이 수반되어야 할 것으로 사료된다.

宋服飾이 高麗服飾에 미친 影響에 대한 硏究 -女子服飾을 中心으로- (A Study on the Influence of Song Dynasty Mode upon Clothes and Ornaments of Korea Dynasty -As Regards Women′s Clothing-)

  • 이순자
    • 복식문화연구
    • /
    • 제3권1호
    • /
    • pp.125-155
    • /
    • 1995
  • This research has been studied the influence of Song Dynasty mode upon clothes and ornaments of Korea Dynasty by Seo Gung's (徐競) 『SunWhaBongSa KoryoDoKyung』(宣和奉使高麗圖經) and in Korea Dynasty period, by Buddhist picture. The clothing of the Song Dynasty was quite reserved and conservative, fewer variations and quiter colours thus conveying a feeling of simplicity and naturalness. Their clothings were no more luxurious than the clothing of Dang Dynasty. We had read that when Seo Gung visited Korea for month, and then it is in Emperor Injong's reign(A.D. 1123). Korea women's clothes and ornaments were followed by Song dynasty's clothing pattern as much as the took notice of Korea women's clothing. Korea DoKyung showed Song women's clothing that whal clothing that whal clothing (華衣), Yuansam(圖經) were Korea women's a ceremonial dress and so, Koryo women's clothing were very influenced by Song's mode. The conclusion of the research are as follows found out that Korea women's a ceremonial dresses were similar to Song's.

  • PDF

한국형 틸팅열차 운행 중 운전 모드에 따른 고조파 분석 및 평가에 관한 연구 (A Study on Harmonic Analysis and Evaluation According to Operating Mode During Operation of the Tilting Train Express)

  • 강철;임재찬;허재선;김재철;이수길;한성호
    • 전기학회논문지P
    • /
    • 제58권4호
    • /
    • pp.416-421
    • /
    • 2009
  • Recently, the new Korean Tilting Train Express(TTX) which maintains a speed on the curve railway line is developed. Electric railways, including the TTX, have electrical problems that could bring about serious accidents. For such reasons, the electric railway's electrical problems, electrical harmonic and others, have been studied briskly. Thus, TTX's electrical problems also need leading studies because the new Korean TTX will operate earnestly in 2012. The results could be used hereafter diagnosis of it's components and train conditions. In the paper, electrical signals in TTX operation were measured to analyze electrical harmonic. In addition, after the electrical signals were measured to operating mode (coasting mode, acceleration mode and regenerative breaking mode) respectively in test section(Ho-nam line, Chung-buk line, Jung-ang line and Tae-baek line). The electrical harmonics considered operating modes triparted were analysed and evaluated.

LMI를 이용한 퍼지 시스템의 슬라이딩 모드 관측기 설계 (Sliding Mode Observer for Fuzzy System: An LMI Approach)

  • 송민국;주영훈;박진배
    • 한국지능시스템학회논문지
    • /
    • 제16권4호
    • /
    • pp.506-511
    • /
    • 2006
  • 본 논문에서는 비선형 시스템의 슬라이딩 모드 관측기 설계에 대해서 논의한다. 제어 대상인 비선형 시스템을 모델링 하는데 있어서 Takagi-Sugeno(T-S) 퍼지 모델 기법을 이용하였고, 이때 발생할 수 있는 모델 불확실성과 외란에 대해 그 것의 최대 최소 범위를 안다고 가정하였다. 제안된 시스템의 LMI (Linear Matrix Inequality)를 기반으로 한 슬라이딩 모드 관측기 설계 방법에서는 관측기와 시스템의 차이를 슬라이딩 표면으로 설정한다. 안정한 슬라이딩 표변을 갖는 슬라이딩 관측기의 존재 가능성을 선형 행렬 부등식의 형태로 표현한다. 슬라이딩 모드 관측기 이득은 LMI 존재 조건의 해를 이용하여 구한다. 모의 실험을 통하여 논문에서 제안한 슬라이딩 모드 관측기의 성능을 시험한다.

PZT 압전 세라믹스를 사용한 2중 모우드 초음파 트랜스듀서 제작 (Fabrication of dual mode ultrasonic transducers with PZT piezoelectric ceramics)

  • 김연보;노용래;남효덕
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제8권5호
    • /
    • pp.572-579
    • /
    • 1995
  • Most of conventional ultrasonic transducers are constructed to generate either longitudinal or shear waves, but not both of them. We investigate the mechanism of dual mode transducers that generate both of the longitudinal and shear waves simultaneously with single PZT element. The study is aimed to find the optimally desired cut by examining the anisotropic piezoelectric properties. Theory predicts that a mixed P/S mode transducer can be constructed using a rotated Z-cut of PZT piezoelectric ceramics. We study the performance of a PZT element as a function of its rotation angle so that its efficiency is optimized to excite the two waves as much as equally strong. The results are verified by the waveform in pulse-echo computer simulation and experiments. When the transducer is subjected to impedance analysis, it shows two thickness mode resonances, each of which being a mixed P/S thickness mode. By examining wave speeds on E transmitter delay line receiver setup, it is confirmed that the transducer can transmit and detect both longitudinal and shear wave simultaneously.

  • PDF

T-S 퍼지 모델을 이용한 비선형 시스템의 퍼지 슬라이딩 모드 제어 (Fuzzy Sliding Mode Control of Nonlinear System Based on T-S Fuzzy Dynamic Model)

  • 유병국;양근호
    • 한국지능시스템학회논문지
    • /
    • 제14권1호
    • /
    • pp.112-117
    • /
    • 2004
  • 본 논문에서는 Takagi-Sugeno(T-S) 퍼지 시스템 모델을 이용한 비선형 시스템의 퍼지 슬라이딩 모드제어방식을 제안한다. 이 방식에서는 하나의 T-S 퍼지 모델을 구성하는 각 선형 동력학의 입력 이득행렬을 단일화 하는 과정을 필요로 한다. 이 과정에서 생성되는 입력 불확실성은 슬라이딩 모드 제어의 외란에 대한 처리 방법으로 해결될 수 있다. 또한 기존의 T-S 퍼지 모델에 대한 제어방식에서 처리하지 못했던, 상태변수에 독립적이기 때문에 선형화되지 않는 비선형 항에 대한 문제를 해결할 수 있다. 제안된 제어시스템의 안정도를 보이며 제어 입력이 슬라이딩 평면에 대한 도달조건을 만족함을 보인다. 제안된 제어방식의 타당성과 제어기 설계과정을 보이기 위하여 역진자 시스템에 적용한 시뮬레이션 결과를 보인다.

시추코어를 이용한 암석의 mode II 파괴인성 시험법 개발과 적용 (Development and Application of Mode II Fracture Toughness Test Method Using Rock Core Specimen)

  • 정용복;박의섭;김현우
    • 터널과지하공간
    • /
    • 제26권5호
    • /
    • pp.396-408
    • /
    • 2016
  • 암석파괴역학은 토목공학과 암반공학의 다양한 분야에서 널리 적용되는 학문이다. 그러나 대부분의 암반 공학 문제에서 mode II 거동이 우세함에도 불구하고 관련 연구는 mode I 거동에 대한 것이 대부분이다. 현재 mode I의 경우 4개, mode II 파괴인성의 경우 단 한 개의 ISRM 표준시험법이 있다. 본 연구에서 제안하는 새로운 시험법은 문헌조사를 통해서 필요조건으로 구속압 가능 여부, 노치성형의 용이성, 기존 시험장비의 활용, 단순한 시험절차를 정하고 이에 부합하도록 개발하였으며 SCC(Short Core in Compression)로 이름을 정하였다. Mode II 파괴인성 계산에 필요한 응력확대계수 계산식을 3차원 수치해석을 통해 선하중과 분포하중 조건에 대해서 구하였고 노치성형을 위한 지그도 제작하였다. 개발된 시험법을 MTS 시스템을 사용하여 화강암에 적용하였으며 가압속도는 0.002 mm/s로 하였다. 시험 결과 $2.33MPa{\sqrt{m}}$의 mode II 파괴인성을 얻었다. 동일한 화강암 블록에서 확보한 시험편에 대하여 간접인장시험으로 구한 mode I 파괴인성은 $1.12MPa{\sqrt{m}}$였다. 따라서 $K_{IIC}/K_{IC}=2.08$로 mode II 파괴인성이 mode I보다 크게 나타났다. 또한 비교적 매끄러운 파괴면과 암분의 생성을 통하여 SCC 시험법이 mode II 거동을 잘 표현함을 확인하였다. 따라서 제안된 SCC 시험법은 암석의 mode II 파괴인성을 결정하는 데 사용할 수 있을 것으로 판단된다.