• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.67-74
• /
• 2007

The purpose of this study is to provide the necessarily basic data of the ideal growth of the students by investigating the effect of the student's stress due to the parent's achievement pressure. The sample of this study are In students consisting of 51 boys and 49 girls in the 3rd grade classes of "J" middle school located in Siheung city, Kyungki-do. The observed materials are used to investigate the parent's achievement pressure and the level of stress. Based on the observed data, the frequency, correlation, and t-test have been gained. The results are summarized as follows : 1. The perception of the parent's achievement pressure is shown more by the boy's achievement pressure($44.2{\pm}9.9$) than the girl's achievement pressure($39.939{\pm}11.089$), among the high level students. 2. The perception of the parent's achievement pressure is shown more the high($43.0{\pm}10.7$) and middle($42.9{\pm}11.8$) level students than the low($39.7{\pm}8.00$) level students. 3. The stress of male students was high in the Solving Problem stress factor with by the mean of $15.1{\pm}3.7$, and the stress of female students was high in the Self-Control stress factor with the mean of $13.3{\pm}3.9$. 4. The stress of high, middle, low level student was high in the Solution of Matter stress factor with the mean of $14.2{\pm}3.9$. 5. The results were the main cause of the stress than the parent's achievement pressure.

• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.23-31
• /
• 2000

The objective of this study was to develop an effective separation and quantification method for kerosene and diesel in a mixed petroleum fuel (gasoline, kerosene, and diesel) contaminated environmental samples. This investigation was directed to prove the hypothesis that if the source of petroleum fuels were identical, the peak-area ratios of a reference n-alkane to other n-alkane peaks should be a constant even at the different concentrations. In addition, experimental recovery rates were determined to select the reference peaks of kerosene and diesel for peak area ratio measurements. The experimental results showed that the peak area ratios were constant among the samples having different concentrations when the ratios were calculated from areas of $C_{l3}$, $C_{l4}$, and $C_{15}$ peaks for kerosene and $C_{l6}$ and $C_{l7}$ peak for diesel as reference n-alkane peaks. The recovery rates were evaluated by comparing the relative peak area ratios of each reference peaks after making pairs of the kerosene and diesel reference peaks in the samples contained a known amount of gasoline, kerosene, and diesel. The recovery rates(%) Were 107.0$_{{\pm}20.6}$/86.6/ sub $\pm$15.9/ for kerosene- $C_{13}$/diesel- $C_{16}$, 99.6$\pm$$_{17.2}$/86.6$_{{\pm}15.9}$ for kerosene- $C_{14}$/diesel- $C_{16}$, 73.9/$\pm$14.4//86.6$_{{\pm}sub 15.9}$ for kerosene- $C_{15}$ /diesel- $C_{16}$, 109.4$_{{pm}0.8}$/75.9$_{{pm}4.7}$ for kerosene- $C_{13}$/diesel- $C_{17}$, 107.4$_{{pm}7.9}$/75.9$_{{pm}4.7}$ for kerosene- $C_{14}$/diesel- $C_{17}$, and 95.7$_{{pm}4.6}$ /75.9/$\pm$14.6//75.9$_{{pm$}4.7}$ for kerosene- $C_{15}$ /diesel- $C_{17.}$ The above experimental results confirm that all of the reference peak pairs of kerosene and diesel are applicable to the quantitative analysis for the mixed fuel contaminated samples, but the kerosene- $C_{15}$ /diesel- $C_{l7}$ peaks are recommended since the pair has a lower standard deviation than the other pairs.s..s.s.s..s..s.s.s.s.s.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.811-816
• /
• 2011

Cryoextraction (a freeze concentration using an instrument) can increase the sugar concentration in grape juice by reducing its water content, similar to the natural freezing of grapes for natural ice wine. In this study, fermentation of freeze-concentrated Campbell Early grape (Vitis labruscana) juice to 36 $^{\circ}Bx$ was carried out using Saccharomyces cerevisiae strains D8 and S13 isolated from Korean grapes. During the fermentation, strains S13 and D8 showed rapid sugar reduction and alcohol production compared with S. cerevisiae Fermivin$^{(R)}$ used as a control. After nine-day fermentation, the residual sugar contents were lower in W13(9.77%) and D8 wine(9.07) than that in Fermivin$^{(R)}$ wine(14.0%). Total acid content was high in the D8>S13>Fermivin$^{(R)}$ wine, in that order. The acetaldehyde content was highest in the D8 wine and lowest in the Fermivin$^{(R)}$ wine, among the three. The methanol content was slightly higher in the S13 and D8 wines than in the Fermivin$^{(R)}$ wine. In the sensory evaluation, the S13 wine exhibited the highest score in flavor and taste among the three wines. Both the two S13 and D8 wines exhibited higher scores than Fermivin$^{(R)}$ wine in overall preference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.183-188
• /
• 2005

Two mammalian receptors are reported (MT1A and MT1B). In this experiments, MT1A is expressed at a little enhanced level (about 8 times) in hypothalamus of the 9 hours exposed mice. In other part of the brain, the expression level of the MT1A and MT1B is elevated at nearly same level: 16 times in cerebellum, 128 times in hippocampus and in thalamus, respectively. But MT1B is expressed at very high level (about thousand times) in hypothalamus of the 9 hours exposed mice.

• Applied Biological Chemistry
• /
• v.41 no.7
• /
• pp.550-555
• /
• 1998

For fluoro-quinolone carboxylic acid derivatives, one bond carbon-fluorine coupling constants are ranged from 249 Hz to 257 Hz regardless of positions. But geminal and vicinal carbon-fluorine coupling constants vary according to positions, namely, geminal coupling constants are ranged from 6 Hz to 23 Hz, and vicinal coupling constants are ranged from 1.9 Hz to 7 Hz. In cases of proton-fluorine couplings, three bond coupling constants are ranged from 9 Hz to 10.3 Hz, and four bond coupling constants ate ranged from 6 Hz to 8.3 Hz.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.218-223
• /
• 2012

Fe-(8.5, 18.5, 28.3, 36.9) wt% Cr alloys were corroded between 600 and $800^{\circ}C$ for up to 70 h in a 1 atm gas mixture that consisted of 0.0242 atm of $H_2S$, 0.031 atm of water vapor, and 0.9448 atm of nitrogen gas. Their corrosion resistance increased with an increment in the Cr content. The Fe-8.5%Cr alloy corroded fast, forming thick, fragile, nonadherent scales that consisted primarily of an outer FeS layer and an inner (Fe, Cr, O, S)-mixed layer. The outer FeS layer grew into the air by the outward diffusion of $Fe^{2+}$ ions, whereas the inner mixed layer grew by the inward diffusion of oxygen and sulfur ions. At the interface of the outer and inner scales, voids developed and cracking occurred. The Fe-(18.5, 28.3, 36.9)% Cr alloys displayed much better corrosion resistance than the Fe-8.5Cr alloy, because thin $Cr_2O_3$ or $Cr_2S_3$ scales formed.

• Journal of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.413-420
• /
• 1980

Die Geschwindigkeitskonstanten der Solvolyse-Reaktionen von 9-Chlormethylanthracen wurden bei verschiedenen Temperaturen in unterschiedlichen binadren Losungsmittelgemischen (Wasser/Aceton, Wasser/Acetonitril, Wasser/Methanol, Wasser/Athanol) mit Hilfe der Leitfahigkeitsmeßungen bestimmt. Die Aktivierungsparameter $E_a$, ${\Delta}H^{\neq}$ und ${\Delta}S^{\neq}$ wurden berechnet. Die Meßergebnisse deuten darauf hin, daß die Solvolyse von 9-Chlormethylanthracen in protonischen Losungsmitteln schneller ablauft als in aprotonischen Losungsmitteln; in den Meßreihen mit protonsichen bzw. mit aprotonischen Losungsmitteln steigt die Reaktionsgeschwindigkeit mit der Zunahme der Dielektrizitatskonstanten des Losungsmittels an, und die Aktivierungsparameter nehmen mit steigendem Wassergehalt zu. Es wurde festgestellt, daß die Reaktion nach einem $S_N1$-Mechanismus ablauft. Die experimentellen Daten deuten darauf hin, daß Wasser einerseits als Nucleophil und andererseits als allgemeine Base am Reaktionsmechanismus beteiligt ist.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1637-1642
• /
• 2013

We carried out the melt copolymerization reactions of 1,2-bis(diethylamino)tetramethyldisilane with several aryldiols such as, 4,4'-biphenol, 4,4'-isopropylidenediphenol, 9H-fluoren-9,9-dimethanol, and 4,4'-(9-fluorenylidene) bis(2-phenoxyethanol) to afford poly[oxy(arylene)oxy(tetramethyldisilylene)]s containing fluorescent aromatic chromophore groups in the polymer main chain: poly[oxy(4,4'-biphenylene)oxy(tetramethyldisilylene)], poly[oxy{(4,4'-isopropylidene) diphenylene}oxy(tetramethyldisilylene)], poly[oxy(9H-fluorene-9,9-dimethylene) oxy(tetramethyldisilylene)], and poly[oxy{4,4'-(9-fluorenylidene)bis(2-phenoxyethylene)}oxy(tetramethyldisilnylene)]. These prepared materials are soluble in common organic solvents such as $CHCl_3$ and THF. The obtained polymers were characterized by several spectroscopic methods such as $^1H$, $^{13}C$, and $^{29}Si$ NMR. Further, FTIR spectra of all the polymers exhibited characteristic Si-O stretching frequencies at 1014-1087 $cm^{-1}$. These polymeric materials in THF showed strong maximum absorption peaks at 268-281 nm, strong maximum excitation peaks at 263-291 nm, and strong maximum fluorescence emission bands at 314-362 nm due to the presence of tetramethyldisilylene and several arylene chromophores in the polymer main chain. TGA thermograms indicated that most of the polymers were stable up to $200^{\circ}C$ with a weight loss of 3-16% in nitrogen.

• Journal of the Korean Magnetics Society
• /
• v.26 no.4
• /
• pp.142-148
• /
• 2016

To evaluate the effect of flip angle on flow rate measurements obtained with phase contrast MRI according to the flip angle degree in ascending aorta and velocity encoding (VENC) was (150 m/s). 1.5T MRI in patients 17 (female: 8, male: 9, mean age $57.9{\pm}15.4$) as a target by applying a non-breath holding techniques to flip angle VENC (150 cm/s) in each of the ascending aorta was measured by changing $20^{\circ}$, $30^{\circ}$ and $40^{\circ}$. Blood was obtained a peak velocity, average velocity, net forward volume, net forward volume/body surface area. Ascending aorta from average velocity (AV) measured the average value of the flip angle $20^{\circ}$ (9.87 cm/s), $30^{\circ}$ (9.6 cm/s) and $40^{\circ}$ (10.05 cm/s). Blood flow VENC in was blood flow change in flip angle change was high most blood flow measurement when the flip angle $30^{\circ}$ in VENC, crouching each blood flow is also proportional to the increases in the $20^{\circ}$ to $40^{\circ}$ and was increased, the deviation of the peak velocity and the average velocity is the smallest deviation from the flip angle $30^{\circ}$. Flip angle $20^{\circ}$, $30^{\circ}$ and $40^{\circ}$ in peak velocity, average velocity, net forward volume, net forward volume/body surface area was no statistically significant difference (p > .05). Blood flow velocity and blood flow is measured by applying to adjust the flip angle accurately calculate the blood flow is important information for diagnosis and treatment of cardiovascular diseases, and can help in the examination on the blood flow measurement.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.493-507
• /
• 2018

The Wooseok deposit in Jecheon belongs to the Hwanggangri Mineralized Distict of the northeastern Ogcheon Metamorphic Belt. Its geology consists mostly of limestone of the Choseon Supergroup and the Cretaceous Muamsa granite intruded at the eastern area of the deposit. The deposit shows vertical occurrence of skarn and hydrothermal vein ores with W-Mo-Fe and Cu-Pb-Zn mineralization and skarn is developed only at lower levels of the deposit. Skarn minerals are replaced or cut by ore minerals in paragenetic sequence of magnetite-hematite, molybdenite-scheelite-wollframite, and higher abundances of pyrrhotite-chalcopyrite-pyrite-sphalerite-galena. Garnet has chemical compositions of $Ad_{65.9-97.8}Gr_{0.3-32.0}Pyr_{0.9-3.0}$, corresponding to andradite series, and pyroxene compositions are $Hd_{4.5-49.7}Di_{42.3-93.9}Jo_{0.5-7.9}$, prevailing in diopside compositions, both of which suggest oxidized conditions of skarnization. On the FeS-MnS-CdS ternary diagram, FeS contents of sphalerite in vein ores decrease with increasing MnS contents from bottom to top levels, possibly relating to W mineralization in deep and Pb-Zn mineralization in shallow level. Sulfur isotope values of sulfide minerals range from 5.1 to 6.8‰, reflecting magmatic sulfur affected by host rocks. W-Mo skarn and Pb-Zn vein mineralization in the Wooseok deposit were established by spatio-temporal variation of decreasing temperature and oxygen fugacity with increasing sulfur fugacity from bottom to top levels.