• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.111-115
• /
• 2005

Recently, natural fibers draw much interests in composite industry due to low cost, light weight, and environment-friendly characteristics compared with glass fibers. In this study, mechanical properties were evaluated for two extreme cases of jute fiber orientations, i.e. the unidirectional yarn composites and the felt fabric composites. Samples of jute fiber composites were fabricated by RTM process using epoxy resin, and tensile, compression, and shear tests were conducted. As can be expected, unidirectional fiber specimens in longitudinal direction showed the highest strength and modulus. Compared with glass/epoxy composites of the similar fabric architecture and fiber volume fraction, the tensile strength and modulus of jute felt/epoxy composites reached only 40% and 50% levels. However, the specific tensile strength and modulus increased to 80% and 90% of the glass/epoxy composites. The main reason for the poor mechanical properties of jute composites is associated with the weak interfacial bonding between fiber and matrix. The effect of surface treatment of jute fibers on the interfacial bonding will be examined in the future work.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.1-9
• /
• 2012

A 10-b 500 MS/s A/D converter (ADC) with a hybrid calibration and error correction logic is described. The ADC employs a single-channel cascaded folding-interpolating architecture whose folding rate (FR) is 25 and interpolation rate (IR) is 8. To overcome the disadvantage of an offset error, we propose a hybrid self-calibration circuit at the open-loop amplifier. Further, a novel prevision digital error correction logic (DCL) for the folding ADC is also proposed. The ADC prototype using a 130 nm 1P6M CMOS has a DNL of ${\pm}0.8$ LSB and an INL of ${\pm}1.0$ LSB. The measured SNDR is 52.34-dB and SFDR is 62.04-dBc when the input frequency is 78.15 MHz at 500 MS/s conversion rate. The SNDR of the ADC is 7-dB higher than the same circuit without the proposed calibration. The effective chip area is $1.55mm^2$, and the power dissipates 300 mW including peripheral circuits, at a 1.2/1.5 V power supply.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.304-306
• /
• 1996

Endoscopy has become a crucial diagnostic and theraputic procedure in clinical areas. Over the past three years, we have developed a computerized system to record and store clinical data pertaining to endoscopic surgery of laparascopic cholesystectomy, peviscopic endometriosis, and surgical arthroscopy. In this study, we are developed computer system, which is composed of frame grabber, sound board, VCR control board, LAN card and EDMS(endoscopic data management software). Also, computer system has controled over peripheral instruments as a color video printer, video cassette recorder, and endoscopic input/output signals(image and doctor's speech). Also, we are developed one body system of camels control unit including an endoscopic miniature camera and light source. Our system offer unsurpassed image quality in terms of resolution and color fidelity. Digital endoscopic data management system is based on open architecture and a set of widely available industry standards, namely: windows 3.1 as a operating system, TCP/IP as a network protocol and a time sequence based database that handles both an image and drctor's speech synchronized with endoscopic image.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.82-89
• /
• 2009

최근 국내에서는 건설생산현장에서 순환골재 및 이를 활용한 순환골재 콘크리트의 사용을 적극적으로 도모하기 위하여 순환골재 콘크리트의 제조기술에 관한 다양한 연구개발이 활발하게 이루어지고 있으나 순환굵은 골재에 비하여 순환잔골재에 관한 적용 및 연구는 미흡한 실정이다. 따라서 본 연구에서는 순환잔골재를 사용한 환경부하저감형 콘크리트의 공학적 성능 및 수축균열저감 성능 향상을 위한 섬유보강 순환잔골재 콘크리트의 공학적 특성 및 수축균열특성에 관하여 실험 실증적으로 비교 검토함으로써 향후 환경부하 저감형 섬유보강 순환잔골재 콘크리트의 개발을 위한 기초자료를 제시하고자 한다. 그 결과, 천연잔골재에 비해 순환잔골재의 사용으로 콘크리트의 균열면적이 증가하였으며, W/C비가 증가할수록 균열면적도 증가하는 것으로 나타났다. 또한 섬유종류중 PVA 및 Nylon섬유를 혼입한 시험체의 균열면적이 가장 적은 것으로 나타났으며, 섬유혼입율이 증가할수록 균열면적이 감소하는 것으로 나타나 섬유혼입에 의한 균열저감성능을 확인할 수 있었다.

• 한국실내디자인학회논문집
• /
• 제14호
• /
• pp.82-89
• /
• 1998

During the boom of museum building in the 1970s-80s two museum wee erected in Germany. They are James Stirling's Neue Stattsgalerie Stuttgart and hans Hollein's Stadtisches Museum Abteiberg Monchengladbach, These two museums share the folowing point of similarity : Stirling's Neue Stattsgalerie Stuttgart and Hollein's Staditisches Museum Abetiberg Monchenbladbach both manifest the conditions of the times in light of their respective cities' local characters and historical contexts without being bound to traditional formality. Stirling and Hollein attempted to grasp the meaning of the 기nuseum as a city in miniature." Taking into account the t two museums’s territorial characteristics of being situated on a slope, both Stirling and Hollein made the walker to pass t through their building complex and introduced the concept of a public square within them. As a result, the museums are not j just two large buildings but are architecture composed of a collage of various structures. S Stirling’s architecture employs the method of attaching additional elements on top of basic constituents, which is suggestive '||'&'||'#61551; of the historical fragment from Shinkel's Altes Museum. On the other hand, Hollein applies a collage-style method as if he w were doing urban planning, maintaining the distinctiveness of each of the various forms and materials of buildings. T The object style buildings of the two museums actively demonstrate the contrast of double meaning to represent the a ambiguous and multifarious characteristics of the modern times. Stirling explores the theme of opposition and coexistence in h his Neue Stattsgalerie Stuttgart by placing a series of opposing concepts, such as the past and present and histor${\gamma}$ and t technology, in one space. Thereby, the contradiction and its appeal are manifested. Hollein made use of the visual illusion and c contradiction in alluding to the irony of the modern reality induced by nature and culture and history and technology. F For the above reasons and methods, James Stirling ’ s Neue Stattsgalerie Stuttgart allowed the penetration of art into daily l life and became the general public’s favored museum for its free and unrestrained environment. Likewise, Hans Hollein’s S Stadtisches Museum Abteiberg Moncbengladbach contribute to the development of museum function as it an expression of art i in the form of a complex piece of scupture on its own.ts own.

• 대한전자공학회논문지SD
• /
• 제47권6호
• /
• pp.35-42
• /
• 2010

본 논문에서는 무선 통신 응용 시스템에 적합 하도록 10비트 80MHz 전류구동 방식의 D/A 변환기를 제안하였다. 제안한 회로는 $0.18{\mu}m$ CMOS n-well 1-poly 6-metal 공정을 이용하여 구현하였다. 10비트 중에서 LSB 4비트는 이진 디코더를 사용 하였으며, ULSB 3비트와 MSB 3비트는 온도계 디코더를 사용한 혼합구조를 채택하였다. 구현된 D/A 변환기의 측정결과, 샘플링 주파수가 80MHz, 입력 주파수 1MHz에서 SFDR은 60.42 dBc, 유효비트수는 8.75 비트를 보여주었다. INL/DNL은 ${\pm}$0.38LSB/${\pm}$0.32LSB로 측정되었으며, 글리치 에너지는 4.6 $pV{\cdot}s$로 나타났다. 전력 소모는 1.8V 전원전압에서 최대 속도인 80MHz일 때 48mW로 측정되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.444-448
• /
• 2005

This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.

• 대한전자공학회논문지SD
• /
• 제38권3호
• /
• pp.198-204
• /
• 2001

본 논문에서는 CMOS로 구현된 3.3V 8-bit 200MSPS의 Folding / Interpolation 구조의 A/D 변환기를 제안한다. 회로에 사용된 구조는 FR(Folding Rate)이 8, NFB(Number of Folding Block)가 4, Interpolation rate 이 8이며, 분산 Track and Hold 구조를 회로를 사용하여 Sampling시 입력주파수를 Hold하여 높은 SNDR을 얻을 수 있었다. 고속동작과 저 전력 기능을 위하여 향상된 래치와 디지털 Encoder를 제안하였고 지연시간 보정을 위한 회로도 제안하였다. 제안된 ADC는 0.35㎛, 2-Poly, 3-Metal, n-well CMOS 공정을 사용하여 제작되었으며, 유효 칩 면적은 1070㎛×650㎛ 이고, 3.3V전압에서 230mW의 전력소모를 나타내었다. 입력 주파수 10MHz, 샘플링 주파수 200MHz에서의 INL과 DNL은 ±1LSB 이내로 측정되었으며, SNDR은 43㏈로 측정되었다.

• 대한전자공학회논문지SD
• /
• 제39권7호
• /
• pp.57-65
• /
• 2002

본 논문에서는 CMOS로 구현된 2.5v 10-bit 300MSPS의 D/A 변환기를 제안하였다. 이를 위해 전체구조는 고속동작에 유리한 전류구동 방식의 8+2 분할 타입으로 상위 8-bit은 Thermometer Code 기법을 이용한 전류셀 매트릭스(Current Cell Matrix)로, 하위 2-bit은 이진 가중 전류열(Binary Weighted Current Array)로 설계하였다. 우수한 다이내믹 특성 및 고속 동작을 만족시키기 위해 낮은 글리치 에너지를 갖는 새로운 전류셀과 BDD(Binary Decision Diagram)에 의한 논리합성 기법을 활용한 새로운 역 Thermometer Decoder를 제안하였다. 제안된 DAC는 $0.25{\mu}m$, 1-Poly, 5-Metal, n-well CMOS 공정으로 제작되었으며, 유효 칩 면적은 $1.56mm^2$이고, 2.5V의 전원전압에서 84mW의 전력소모를 나타내었다. 모의실험 및 측정을 통해 최대 글리치 에너지는 0.9pVsec@fs=100MHz, 15pVsec@fs=300MHz로 나타났다. 또한 출력 주파수가 1MHz, 샘플링 주파수가 300MHz에서의 INL과 DNL은 약 ${\pm}$1.5LSB 이내로, SFDR은 45dB로 측정되었다.