• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1903-1914
• /
• 2011

In this paper, we propose vehicle running characteristic simulator. The developed simulator is configured by two induction motors which are directly coupled with each other. One motor is to simulate the vehicle drive and another motor is to simulate the vehicle dynamic load including running resistance, gradient resistance and adhesive characteristics between rail and wheel. The running characteristics of vehicle are modeled by numerical formulas. These are programed by software of embedded controller. Thus, it is possible to change several running characteristics during the running test freely and instantly. To evaluate the feasibility of the simulator, the experiments on slip and adhesion coefficient are performed. Additionally the adhesion control and speed control of vehicle are tested with simulator. Experimental results show that the simulator can produce the driving characteristics similar to the vehicle system.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.145-155
• /
• 2019

Objective: The purpose of this study was to compare the physical characteristics (bone mineral density, joint muscle strength) and running biomechanics between older adults and young adult runners to understand the changes of running strategy by aging. Method: Bone mineral density (Dual Energy X-ray Absorptiometry, USA) of lower lower extremity and muscle strength (Cybex Humac Norm [DEXA], CSMI, USA) were measured to identify the physical characteristics of 10 elderly (age: $67.70{\pm}3.30yrs$, height: $1.68{\pm}0.04m$, mass: $67.70{\pm}3.80kg$) and 10 young adults (age: $21.20{\pm}0.42yrs$, height: $1.73{\pm}0.06m$, mass: $72.11{\pm}4.15kg$). Running data was collected by using an instrumented treadmill (Bertec, USA) and 7 infrared cameras (Oqus 300, Qualisys, Sweden). Two-way repeated ANOVA analysis was used to analyze results at a significant level of .05 with Bonferroni post hoc analysis. Results: Compared to the young adult group, the elderly group showed statistically significant difference in physical characteristics and in running characteristics. Elderly runners showed lower BMD and muscle strength compared with young runners (p<.05). In the running parameters, elderly runners tend to show shorter contact time and stride length compared with young runners (p<.05). In the joint angles, elderly runners showed smaller range of ankle motion compared with young runners (p<.05). Finally, elderly runners showed lower level of joint moment, joint power, and GRF compared with young runners in each running speed (p<.05). Conclusion: The running behavior of the elderly performed periodic running was similar to many variables of young adults. However, there were noticeable differences found in the ankle joints and most kinetic variables compared with young adult runners. This discrepancy may propose that elderly runners should consider appropriate running distance and intensity in the program.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.908-912
• /
• 2008

Structure-borne noise is known to dominate internal running noise levels in open field. In this paper vibration isolation characteristics of floors are investigated to see their effect on the internal running noise. By using the analysis and test results of test specimen of small size, internal running noise level of complete train is estimated. Analysis results show that soft rubber as a vibration isolator has the most favorable effect on the inside running noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.265-268
• /
• 2004

Impact sounds, such as those created by footsteps, the dropping of an object or the moving of furniture, can be a source of great annoyance in residential buildings. Running and jumping impact sound by child are one of the most irritating noises in an apartment buildings. It's necessary to know that the impact force characteristics of real impact source in an apartment buildings. This study aims to investigate the impact force characteristics and impact force time of running and jumping by child. This study cud out investigation through the 155 children in school. The results of this study is that jumping impact force is greater than running impact force but impact force time is lower than that.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.5 s.98
• /
• pp.542-549
• /
• 2005

Impact sounds, such as those created by footsteps, the dropping of an object or the moving of furniture, can be a source of great annoyance In residential buildings. Running and jumping impact sound by child are one of the most irritating noises in an apartment buildings. It's necessary to know that the impact power characteristics of real impact source in an apartment buildings. This study aims to Investigate the impact power characteristics and impact power time of running and jumping by child. This study carried out investigation through the 159 children in school. The results of this study is that jumping impact power is greater than running impact power.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.641-644
• /
• 2003

The running safety of the rolling stock depends on the design characteristics and the contact condition between wheel and railway. In this study, it is analyzed how equivalent conicity of wheel tread or its characteristics has influence on the running safety.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.273-276
• /
• 2004

Dynamic model of the Korea standardized rubber-tired AGT light rail vehicle, and boundary conditions between vehicle and infrastructures (running track, guidance rail) were defined to analyze vehicular vibration behaviors occurred at the worst condition for straight running track. Using the commercialized software RecurDyn, resultant forces and vibration accelerations of car body and bogies were analyzed. Based on the Korea performance test criteria for urban transit, vertical and lateral vibration of car body were calculated and evaluated as wearing condition of guide wheels. And resultant forces between bogie guidance frame and guide rail in straight running track were analyzed. As the results, the Korea standardized rubber-tired AGT light rail vehicle satisfied the performance criteria and design requirement .

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1955-1961
• /
• 2007

In this paper, we propose the mathematical model for the vehicle system including running characteristics. The well defined model for a system is necessary to study and to enhance system performance. To model the dynamic properties of vehicle system, we have considered two fundamental parts. The first part is the motion equations for vehicle based on Newton's second law. The second part is the torque dynamics of the traction motor. These parts are affected by outer conditions such as adhesive coefficient, running resistance and gradient resistance. The each parts are presented by the numerical formula. To test the driving characteristics of the developed model, we performed the simulations by dynamic system simulation software, "SIMULINK" and the results are given for several conditions.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.4
• /
• pp.164-174
• /
• 2023

Objective: The aim of this study was to quantitatively analyze the impact characteristics of the lower extremity on strike pattern during running. Method: 19 young subjects (age: 26.53 ± 5.24 yrs., height: 174.89 ± 4.75 cm, weight: 70.97 ± 5.97 kg) participated in this study. All subjects performed treadmill running with fore-foot strike (FFS), mid-foot strike (MFS), and rear-foot strike (RFS) to analyze the impact characteristics in the lower extremity. Impact variables were analyzed including vertical ground reaction force, lower extremity joint moments, impact acceleration, and impact shock. Accelerometers for measuring impact acceleration and impact shock were attached to the heel, distal tibia, proximal tibia, and 50% point of the femur. Results: The peak vertical force and loading rate in passive portion were significantly higher in MFS and FFS compared to FFS. The peak plantarflexion moment at the ankle joint was significantly higher in the FFS compared to the MFS and RFS, while the peak extension moment at the knee joint was significantly higher in the RFS compared to the MFS and FFS. The resultant impact acceleration was significantly higher in FFS and MFS than in RFS at the foot and distal tibia, and MFS was significantly higher than FFS at the proximal tibia. In impact shock, FFS and MFS were significantly higher than RFS at the foot, distal tibia, and proximal tibia. Conclusion: Running with 3 strike patterns (FFS, MFS, and RFS) show different impact characteristics which may lead to an increased risk of running-related injuries (RRI). However, through the results of this study, it is possible to understand the characteristics of impact on strike patterns, and to explore preventive measures for injuries. To reduce the incidence of RRI, it is crucial to first identify one's strike pattern and then seek appropriate alternatives (such as reducing impact force and strengthening relevant muscles) on that strike pattern.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1292-1296
• /
• 2004

This study is experimented results of running characteristics about electric locomotive. it executed to study a power quality in the substation of Honam electrification line and to promote knowledge, observation and management in electric rail-system. we measured to know the more exactly running characteristics that electric locomotive and electric substation at the same time.