• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.290-293
• /
• 1996

This paper presents an EMQ model which determines an optimal production run length in a deteriorating machine. It is assumed that a machine is subject to a random deterioration from an in-control state to an out-of-control state with an arbitrary distribution and thus producing constant proportion of defective items. An average cost function and an optimal production run length are determined. A mistake in previous model is found and discussed. A mistake in previous model is found and discussed. Numerical experiments are carried out to see the behavior of the proposed model depending on the cost factors as well as machine parameters, and some interesting behaviors are observed.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.4
• /
• pp.205-209
• /
• 2010

Even the domestically small-and medium-sized companies progressed development in the monitoring equipment of inspecting run out in steel wheel aiming to supply and generalize through developing the monitoring equipment for securing quality technology and enhancing quality-test level. Run-Out value in vehicle wheel was measured with Computer & Servo system by using Low-Point marking machine control system, which is this development product. Low-Point value was operated and calculated. It marked by revolving wheel as much as the demanded measurement value based on 1ST harmony curve. Thus, the shipment of inferior product, which occurs in the measurement by the existing worker, could be blocked in advance. In the existing case, 60 sec. was required for inspecting 1 product. However, it came to bring about a rise in production volume through shortening inspection time to 8 seconds and improving workers' operating environment.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.3
• /
• pp.351-364
• /
• 1996

This paper presents on EMQ model which determines an optimal production run length in a deteriorating machine. It is assumed that a machine is subject to a random deterioration from an in-control state to an out-of-control state with on arbitrary distribution and thus producing some proportion of defective items. An optimal production run length and a minimum average cost are derived in each of three deteriorating processes; constant, linearly increasing, and exponentially increasing. The model with repair cost is also analyzed. Several mistakes in previous research are found and discussed. Numerical experiments are carried out to see the behavior of the proposed model depending on the cost factors as well as machine parameters, and some interesting behaviors are observed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.691-698
• /
• 2015

Inertial Navigation Systems (INS) are widely used as the main navigation device for aircraft. To get the initial attitude, the INS requires the initial alignment before navigation starts. An aircraft also needs an engine test procedure that causes some vibrations before flight. An INS can't be aligned in a vibration environment so the initial alignment is performed before the aircraft engine test. Therefore, the initial alignment time of an INS has been a major factor in limiting an aircraft's takeoff response time. In this paper, we designed an initial alignment algorithm that can be executed even in disturbances such as aircraft run-up. We demonstrated verification of the algorithm that is embedded on the real INS and testing methods to evaluate the alignment of the INS. We also analyzed the test results of the proposed initial alignment algorithm that is performed during a real aircraft run-up.

• The Korean Journal of Applied Statistics
• /
• v.37 no.2
• /
• pp.177-189
• /
• 2024

The run length is defined as the number of samples or subgroups taken before the control chart statistic exceeds the control limits. Because the distribution of run length is typically asymmetric and has a large variability, it may not be appropriate to use ARL (average run length) alone to design control charts and evaluate performance. In this paper, we introduce the concept of percentile (PL)-based design of control charts, and propose the procedure for PL-based design of EWMA (exponentially weighted moving average) charts. For the PL-based design of EWMA, we present a fitted function for the control chart coefficient, given specific percentile parameters. Additionally, we perform simulations to compare the proposed design with the ARL-based design. The simulation results show that the proposed design yields improvements in monitoring in-control processes while maintaining the ability to detect out-of-control performance.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.497-505
• /
• 2005

Domestic Sewage Treatment Plants are mostly based on biological treatment, in which large amounts of excess sludge are generated and occupy about 40 ~ 60% of the total sewage treatment costs. Several methods for sludge treatment has been so far reported as upgrading biodegradation of sludge; heat treatment, chemical treatment, including thermo-alkali and ozone, mechanical treatment including ultrasonic pulverization. But, it has a limitation in case of reducing the amount of excess sludge which are already producted. In this study, application of excess sludge reduction process using thermophilic aerobic bacteria for activated sludge was examined. The research was carried out two different stage. one for a biological wastewater treatment and the other for a thermophilic aerobic solubilization of the waste sludge. A portion of excess sludge from the wastewater treatment step was into the thermophilic aerobic sludge solubilization reactor, in which the injected sludge was solubilized by thermophilic aerobic bacteria. The solubilized sludge was returned to the aeration tank in the wastewater treatment step for its further degradation. Sludge solubilization reactor was operated at $63{\pm}2^{\circ}C$ with hydraulic retention time(HRT) of 1.5 ~ 1.7 day. Control group was operated with activated sludge process(AS) and experiment group was operated with three conditions(RUN 1, RUN 2, RUN3). RUN 1 was operated with AS without sludge solubilization reactor. RUN 2 were operated with AS with sludge solubilization reactor to examine correlation between sludge circulation ratio and sludge reduction ratio by setting up sludge circulation ratio to 3. RUN 3 was operated with sludge circulation ratio of 3 and MLSS concentration of 1,700~2,000mg/L to examine optimum operation condition. The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge solubilization ratio and sludge reduction ratio were 53. 7%, 95.2% respectively. After steady state operation, average concentration of TBOD, SBOD, $TCOD_{Cr}$, $SCOD_{Cr}$, TSS, VSS, T-N, T-P of effluent were 4.5, 1.7, 27 .8, 13.8, 8.1, 6.2, 15.1, 1.8mg/L in the control group and were 5.6, 2.0, 28.6, 19.1, 9.7, 7.2, 16.1, 2.0mg/L in the experimental group respectively. They were appropriate to effluent standard of Sewage Treatment Plants.

• Korean Journal of Exercise Nutrition
• /
• v.14 no.2
• /
• pp.63-68
• /
• 2010

This study evaluated the effects of high pressured red ginseng(HRG) and ginseng berry(GB) supplementation on lipid profiles and run to exercise time in SD rats. Five weeks-old male rats were randomly assigned into six groups, ie. control group(AC: n = 8), exercise group(AE: n = 7), general extracted red ginseng group(C: n = 8), HRG group(high density D: n = 8, low density E: n = 7), and HRG + GB group(F: n = 7). The AC and AE groups had a supplementation of AIN-93G, and AE group performed 40 min treadmill exercise five times per week for five weeks. E, C, D, and F groups had a supplementation composed of general extracted red ginseng(GRG), HRG(250 mpk and 500 mpk), and HRG(250 mpk) + GB(167 mpk) in the AIN-93G. Main results of the study were as follow 1) the duration of running time to exhaustion was higher in exercise group compared to other groups. HRG had no effect on run to exhaustion time, but, GRG and HRG + GB showed longer run time than control groups. 2) Blood TC, TG, HDL-C and liver TG showed no difference between groups, but, liver TC showed lower level in the HRG groups than other groups. It was concluded that the 5 weeks of supplementation of HRG extract would have positive effects on liver cholesterol, and GRG and HRG + GB have a positive effect on exercise performance tested run to exhaustion time, but, we can not find a positive effect of supplementation of HRG on exercise performance.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7203-7206
• /
• 2013

Recent studies suggested that the ovarian cancers with negative excision repair cross-complementation group 1 enzyme (ERCC1) expression have a better response to platinum-based chemotherapy than those with positive ERCC1 expression. The objective of this study was to evaluate whether ERCC1 expression is associated with response to platinum-based chemotherapy in ovarian cancers. MEDLINE, PubMed, Web of Science and CNKI databases were used for searching studies relating to ERCC1 protein expression and response to platinum-based chemotherapy in ovarian cancers. Statistical analysis was based on the method for a fixed effects meta-analysis. Pooled odds ratios (ORs) with 95% confidence intervals for ERCC1 protein expression and response to platinum-based chemotherapy were generated. Publication bias was investigated with Begg's test. Five studies involving 306 patients with ovarian cancer were included. Compared to patients with positive ERCC1 expression, those with negative ERCC1 expression had a better response to platinum-based chemotherapy. The pooled OR was 5.264 (95% CI: 2.928-9.464, P < 0.001) and publication bias was not found (P = 0.904). The result was similar in both in Asians and Caucasians (P < 0.001 and P = 0.028, respectively). ERCC1 protein expression status is significantly associated with response to platinum-based chemotherapy in ovarian cancers.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.413-420
• /
• 2006

Most vendors of digital signal processors (DSPs) support a Harvard architecture, which has two or more memory buses, one for program and one or more for data and allow the processor to access multiple words of data from memory in a single instruction cycle. We already addressed how to efficiently assign data to multi-memory banks in our previous work. This paper reports on our recent attempt to optimize run-time memory. The run-time environment for dual data memory banks (DBMBs) requires two run-time stacks to control activation records located in two memory banks corresponding to calling procedures. However, activation records of two memory banks for a procedure are able to have different size. As a consequence, dual run-time stacks can be unbalanced whenever a procedure is called. This unbalance between two memory banks causes that usage of one memory bank can exceed the extent of on-chip memory area although there is free area in the other memory bank. We attempt balancing dual run-time slacks to enhance efficiently utilization of on-chip memory in this paper. The experimental results have revealed that although our algorithm is relatively quite simple, it still can utilize run-time memories efficiently; thus enabling our compiler to run extremely fast, yet minimizing the usage of un-time memory in the target code.

• Industrial Engineering and Management Systems
• /
• v.6 no.1
• /
• pp.11-21
• /
• 2007

The PDCA (Plan, Do, Check and Act) cycle is often used in the field of quality management. Recently, business environments have become more competitive, and the due time of products has shortened. In a short production run process, to increase efficiency of management, the necessity for distinguishing the PDCA design that starts with PLAN and the CAPD design that starts with CHECK has been clarified. Starting from Duncan (1956), there have been a number of papers dealing with the economic design of control charts from the viewpoint of production run. Some authors (Gibra, 1971; Ladany and Bedi, 1976; etc.) have studied the economic design for finite-length runs; other authors (Crowder, 1992; Del Castillo and Montgomery, 1996; etc.) have studied the economic design for short runs. However, neither the PDCA nor the CAPD design of control charts has been considered. In this paper, both the PDCA and CAPD designs of the $\bar{\x}$ chart are defined based on Del Castillo and Montgomery's design (1996), and their mathematical formulations are shown. Then from an economic viewpoint, the optimal values of the sample size per each sampling, control limits width, and the sampling interval of the two designs are studied. Finally, by numerically analyzing the relations between the key parameters and the total expected cost per unit time, the comparisons between the two designs are considered in detail.