• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.691-698
• /
• 2015

Inertial Navigation Systems (INS) are widely used as the main navigation device for aircraft. To get the initial attitude, the INS requires the initial alignment before navigation starts. An aircraft also needs an engine test procedure that causes some vibrations before flight. An INS can't be aligned in a vibration environment so the initial alignment is performed before the aircraft engine test. Therefore, the initial alignment time of an INS has been a major factor in limiting an aircraft's takeoff response time. In this paper, we designed an initial alignment algorithm that can be executed even in disturbances such as aircraft run-up. We demonstrated verification of the algorithm that is embedded on the real INS and testing methods to evaluate the alignment of the INS. We also analyzed the test results of the proposed initial alignment algorithm that is performed during a real aircraft run-up.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.290-293
• /
• 1996

This paper presents an EMQ model which determines an optimal production run length in a deteriorating machine. It is assumed that a machine is subject to a random deterioration from an in-control state to an out-of-control state with an arbitrary distribution and thus producing constant proportion of defective items. An average cost function and an optimal production run length are determined. A mistake in previous model is found and discussed. A mistake in previous model is found and discussed. Numerical experiments are carried out to see the behavior of the proposed model depending on the cost factors as well as machine parameters, and some interesting behaviors are observed.

• 한국산업융합학회 논문집
• /
• 제13권4호
• /
• pp.205-209
• /
• 2010

Even the domestically small-and medium-sized companies progressed development in the monitoring equipment of inspecting run out in steel wheel aiming to supply and generalize through developing the monitoring equipment for securing quality technology and enhancing quality-test level. Run-Out value in vehicle wheel was measured with Computer & Servo system by using Low-Point marking machine control system, which is this development product. Low-Point value was operated and calculated. It marked by revolving wheel as much as the demanded measurement value based on 1ST harmony curve. Thus, the shipment of inferior product, which occurs in the measurement by the existing worker, could be blocked in advance. In the existing case, 60 sec. was required for inspecting 1 product. However, it came to bring about a rise in production volume through shortening inspection time to 8 seconds and improving workers' operating environment.

• 대한산업공학회지
• /
• 제22권3호
• /
• pp.351-364
• /
• 1996

This paper presents on EMQ model which determines an optimal production run length in a deteriorating machine. It is assumed that a machine is subject to a random deterioration from an in-control state to an out-of-control state with on arbitrary distribution and thus producing some proportion of defective items. An optimal production run length and a minimum average cost are derived in each of three deteriorating processes; constant, linearly increasing, and exponentially increasing. The model with repair cost is also analyzed. Several mistakes in previous research are found and discussed. Numerical experiments are carried out to see the behavior of the proposed model depending on the cost factors as well as machine parameters, and some interesting behaviors are observed.

• 응용통계연구
• /
• 제37권2호
• /
• pp.177-189
• /
• 2024

관리도에서 런길이는 관리 통계량이 관리한계를 벗어날 때까지 관측한 표본의 수로 정의한다. 일반적으로 런길이의 분포는 비대칭이 심하고 변동성이 크기 때문에 평균 런길이만 사용하여 관리도를 설계하고 성능을 평가하는 것은 적절하지 않을 수도 있다. 평균 런길이 기반 설계에 대한 대안으로 이 논문에서는 백분위수를 기반으로 한 관리도의 설계를 소개하고, 이를 지수가중이동평균 관리도의 설계에 적용하는 절차를 제안하고 있다. 이 절차는 백분위수 모수들이 주어진 경우, 모의실험을 통하여 적합된 함수를 사용하여 관리한계의 계수를 설정하는 것이다. 또한 모의실험을 수행하여 제안된 설계 절차를 평균 런길이 기반 설계와 비교하고 평가하였다. 모의실험 결과, 제안된 절차는 이상상태에서 탐지 능력은 거의 유지하면서 관리상태에서의 성능을 향상시킨다는 사실을 확인할 수 있었다.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.497-505
• /
• 2005

Domestic Sewage Treatment Plants are mostly based on biological treatment, in which large amounts of excess sludge are generated and occupy about 40 ~ 60% of the total sewage treatment costs. Several methods for sludge treatment has been so far reported as upgrading biodegradation of sludge; heat treatment, chemical treatment, including thermo-alkali and ozone, mechanical treatment including ultrasonic pulverization. But, it has a limitation in case of reducing the amount of excess sludge which are already producted. In this study, application of excess sludge reduction process using thermophilic aerobic bacteria for activated sludge was examined. The research was carried out two different stage. one for a biological wastewater treatment and the other for a thermophilic aerobic solubilization of the waste sludge. A portion of excess sludge from the wastewater treatment step was into the thermophilic aerobic sludge solubilization reactor, in which the injected sludge was solubilized by thermophilic aerobic bacteria. The solubilized sludge was returned to the aeration tank in the wastewater treatment step for its further degradation. Sludge solubilization reactor was operated at $63{\pm}2^{\circ}C$ with hydraulic retention time(HRT) of 1.5 ~ 1.7 day. Control group was operated with activated sludge process(AS) and experiment group was operated with three conditions(RUN 1, RUN 2, RUN3). RUN 1 was operated with AS without sludge solubilization reactor. RUN 2 were operated with AS with sludge solubilization reactor to examine correlation between sludge circulation ratio and sludge reduction ratio by setting up sludge circulation ratio to 3. RUN 3 was operated with sludge circulation ratio of 3 and MLSS concentration of 1,700~2,000mg/L to examine optimum operation condition. The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge solubilization ratio and sludge reduction ratio were 53. 7%, 95.2% respectively. After steady state operation, average concentration of TBOD, SBOD, $TCOD_{Cr}$, $SCOD_{Cr}$, TSS, VSS, T-N, T-P of effluent were 4.5, 1.7, 27 .8, 13.8, 8.1, 6.2, 15.1, 1.8mg/L in the control group and were 5.6, 2.0, 28.6, 19.1, 9.7, 7.2, 16.1, 2.0mg/L in the experimental group respectively. They were appropriate to effluent standard of Sewage Treatment Plants.

• 운동영양학회지
• /
• 제14권2호
• /
• pp.63-68
• /
• 2010

This study evaluated the effects of high pressured red ginseng(HRG) and ginseng berry(GB) supplementation on lipid profiles and run to exercise time in SD rats. Five weeks-old male rats were randomly assigned into six groups, ie. control group(AC: n = 8), exercise group(AE: n = 7), general extracted red ginseng group(C: n = 8), HRG group(high density D: n = 8, low density E: n = 7), and HRG + GB group(F: n = 7). The AC and AE groups had a supplementation of AIN-93G, and AE group performed 40 min treadmill exercise five times per week for five weeks. E, C, D, and F groups had a supplementation composed of general extracted red ginseng(GRG), HRG(250 mpk and 500 mpk), and HRG(250 mpk) + GB(167 mpk) in the AIN-93G. Main results of the study were as follow 1) the duration of running time to exhaustion was higher in exercise group compared to other groups. HRG had no effect on run to exhaustion time, but, GRG and HRG + GB showed longer run time than control groups. 2) Blood TC, TG, HDL-C and liver TG showed no difference between groups, but, liver TC showed lower level in the HRG groups than other groups. It was concluded that the 5 weeks of supplementation of HRG extract would have positive effects on liver cholesterol, and GRG and HRG + GB have a positive effect on exercise performance tested run to exhaustion time, but, we can not find a positive effect of supplementation of HRG on exercise performance.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권12호
• /
• pp.7203-7206
• /
• 2013

Recent studies suggested that the ovarian cancers with negative excision repair cross-complementation group 1 enzyme (ERCC1) expression have a better response to platinum-based chemotherapy than those with positive ERCC1 expression. The objective of this study was to evaluate whether ERCC1 expression is associated with response to platinum-based chemotherapy in ovarian cancers. MEDLINE, PubMed, Web of Science and CNKI databases were used for searching studies relating to ERCC1 protein expression and response to platinum-based chemotherapy in ovarian cancers. Statistical analysis was based on the method for a fixed effects meta-analysis. Pooled odds ratios (ORs) with 95% confidence intervals for ERCC1 protein expression and response to platinum-based chemotherapy were generated. Publication bias was investigated with Begg's test. Five studies involving 306 patients with ovarian cancer were included. Compared to patients with positive ERCC1 expression, those with negative ERCC1 expression had a better response to platinum-based chemotherapy. The pooled OR was 5.264 (95% CI: 2.928-9.464, P < 0.001) and publication bias was not found (P = 0.904). The result was similar in both in Asians and Caucasians (P < 0.001 and P = 0.028, respectively). ERCC1 protein expression status is significantly associated with response to platinum-based chemotherapy in ovarian cancers.

• 정보처리학회논문지A
• /
• 제13A권5호
• /
• pp.413-420
• /
• 2006

대부분의 디지털 신호 처리기 (Digital Signal Processor)는 두 개 이상의 메모리 뱅크를 가지는 하버드 아키텍처 (Harvard architecture)를 지원한다. 다중 메모리 뱅크 중에서 하나는 프로그램용으로 나머지는 데이터용으로 사용하여 프로세서가 한 명령어 사이클에 메모리의 여러 데이터에 동시 접근을 가능하게 한다. 이전 연구에서 우리는 다중 메모리 뱅크에 효율적으로 데이터를 할당하는 방법에 대하여 논하였다. 본 논문에서는 이전 연구의 확장으로 런타임 메모리의 최적화에 대한 우리의 최근 연구에 대하여 소개한다. 듀얼 데이터 메모리 뱅3(Dual Data Memory Bank)를 효율적으로 이용하기 위해 각 메모리 뱅크에 할당된 변수를 관리하기 위한 독립적인 두 개의 런타임 스택이 필요하다. 프로시저에 대한 두 메모리 뱅크의 활성화 레코드(Activation Record)의 크기는 각 메모리 뱅크에 할당된 변수의 개수가 일정하지 않기 때문에 다를 수 있다. 따라서 여러 개의 프로시저가 연속으로 호출될 때 두 개의 런타임 스택의 크기가 크게 달라질 수 있다. 이러한 두 메모리 뱅크 사이의 불균형은 하나의 메모리에 여유 공간이 있음에도 불구하고 다른 하나의 메모리 뱅크의 사용량이 온칩 메모리(on-chip memory)범위를 초과하는 원인이 될 수 있다. 본 논문에서는 온칩 메모리를 효율적으로 사용하기 위해 두 런타임 스택의 균형 맞추기를 시도했다. 본 논문에서 제안하는 알고리즘은 상대적으로 단순하지만 효율적으로 런타임 메모리를 사용할 수 있다는 것을 실험결과를 통해 보여주고 있다.

• Industrial Engineering and Management Systems
• /
• 제6권1호
• /
• pp.11-21
• /
• 2007

The PDCA (Plan, Do, Check and Act) cycle is often used in the field of quality management. Recently, business environments have become more competitive, and the due time of products has shortened. In a short production run process, to increase efficiency of management, the necessity for distinguishing the PDCA design that starts with PLAN and the CAPD design that starts with CHECK has been clarified. Starting from Duncan (1956), there have been a number of papers dealing with the economic design of control charts from the viewpoint of production run. Some authors (Gibra, 1971; Ladany and Bedi, 1976; etc.) have studied the economic design for finite-length runs; other authors (Crowder, 1992; Del Castillo and Montgomery, 1996; etc.) have studied the economic design for short runs. However, neither the PDCA nor the CAPD design of control charts has been considered. In this paper, both the PDCA and CAPD designs of the $\bar{\x}$ chart are defined based on Del Castillo and Montgomery's design (1996), and their mathematical formulations are shown. Then from an economic viewpoint, the optimal values of the sample size per each sampling, control limits width, and the sampling interval of the two designs are studied. Finally, by numerically analyzing the relations between the key parameters and the total expected cost per unit time, the comparisons between the two designs are considered in detail.