• 한국환경과학회지
• /
• 제16권10호
• /
• pp.1189-1195
• /
• 2007

Small gas bubbles are used in many environmental and industrial processes for solid-liquid separations or to facilitate heat and mass transfer between phases. This study examines some of the factors that affect the bubble volume and size processed in the EF (electroflotation) process. The effect of electrode material, NaCl dosage, current and electrode distance were studied. The results showed that the generated bubble volume with electrode material lay in: Pt/Ti ${\fallingdotseq}$ Ru/Ti ${\fallingdotseq}$ Ir/Ti > Ti electrode. The more NaCl dosage was high, the smaller bubble was generated due to the low electric power. Bubble generation was increased with increase of current. With the increase of NaCl dosage, bubble generation was increased at same electric power (16.2 W). Generated bubble volume was not affected by electrode distance. However, no clear trends in bubble size as a function of these parameters were evident.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.401-409
• /
• 2021

The combination of different concentrations of ZnSO₄ in acidic solution as electrolyte in Zn-air batteries was investigated by Zn symmetrical cell test, half-cell and full cell tests. Using 1 M ZnSO₄ + 0.05 M H₂SO₄ as electrolyte and MnO₂ as air cathode catalyst with Zn foil anode, this combination had a satisfactory performance with balance of electrochemical activity and stability. Its electrochemical activity was matched to or even better than the PtRu catalyst in different current density. And its cycle life was improved (more than 100 cycles stable) by suppressing the growth of zinc dendrites on anode obviously. This electrolyte overcame the shortcomings of alkaline electrolyte that are easy to react with CO₂ in the air, severely growth of Zn dendrites caused by uneven plating/stripping of Zn.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.112-117
• /
• 2021

본 연구에서는 생물학적 공유결합인 다이타이로신 결합을 모방하여 비가역적 공유결합을 기반으로 한 펩타이드의 자기조립 방법을 연구하였다. 고밀도의 다이타이로신 결합을 달성하기 위해 Tyr-Tyr-Leu-Tyr-Tyr (YYLYY) 의 서열을 갖는 펩타이드 단량체를 선택하였다. 다이타이로신 결합으로 자기조립 된 펩타이드 나노입자는 가시광선 하에서 Ru(BPY)3Cl2 촉매를 사용하여 단일공정 광가교를 통해 합성되었다. 펩타이드 나노 입자의 크기에 대한 각 성분의 농도 효과는 동적 광산란, UV-Vis 분광법 및 투과 전자 현미경을 사용하여 확인하였다. 이를 통해 130 nm~350 nm범위의 펩타이드 나노입자의 크기별 최적의 합성 조건을 제시하였다.

• 대한화학회지
• /
• 제37권11호
• /
• pp.967-973
• /
• 1993

1,6-헥산디올과 1,7-헵탄디올과 같은 ${\alpha},{\omega}$-디올은 180$^{\circ}$C, 24시간, 촉매량의 루테늄 착물존재하에서 이차아민과 반응하여 좋은 수득율로 대응하는 생성물인 디아미노화합물이 얻어졌다. 디아미노화합물의 수득률은 ${\alpha},{\omega}$-디올과 이차아민의 몰비에 의해 영향을 받았으며, 또한 반응은 채택한 포스핀 배위자의 성질에의해 영향을 받았다. 한편으로 디옥산 용매내에서 루테늄-포스핀 촉매와 방향족 일차아민 및 1,2,6-헥산트리올을 180$^{\circ}$C, 3시간 반응시키면 선택적으로 1-치환-2-히드록시 과수소아제핀이 좋은 수득율로 주어졌다. 이 생성물의 선택적 합성은 두 개의 일차히드록시기가 보다 우선적으로 산화함을 보여주고 있다. 수득율은 방향족 아민의 파라-, 메타- 및 오르토 치환기의 순서에 따라 감소하였다.

• 한국수소및신에너지학회논문집
• /
• 제20권4호
• /
• pp.300-308
• /
• 2009

In a pursuit of the development of alternative mobile power sources with a high energy density, a planar and air-breathing PEMFCs with a new type of hydrogen cartridge which uses onsite $H_2$ generated from sodium borohydride ($NaBH_4$) hydrolysis have been investigated for use in advanced power systems. Two types of $H_2$ generation through $NaBH_4$ hydrolysis are available: (1) using organic acids such as sulphuric acid, malic acid, and sodium hydrogen carbonate in aqueous solution with solid $NaBH_4$ and (2) using solid selected catalysts such as Pt, Ru, CoB into the stabilized alkaline $NaBH_4$ solution. It might therefore be relevant at this stage to evaluate the relative competitiveness of the two methods mentioned above. The effects of flow rate of stabilized $NaBH_4$ solution, MEA (Membrane Electrode Assembly) improvement, and type and flow control of the catalytic acidic solution have been studied and the cell performances of the planar, air-breathing PEMFCs using $NaBH_4$ has been measured from aspects of power density, fuel efficiency, energy density, and fast response of cell. In our experiments, planar, air-breathing PEMFCs using $NaBH_4$ achieved to maximum power density of 128mW/$cm^2$ at 0.7V and energy efficiency of 46% and has many advantages such as low operating temperature, sustained operation at a high power density, compactness, the potential for low cost and volume, long stack life, fast star-up and suitability for discontinuous operation.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.92-96
• /
• 2019

Transition metal oxide is widely used as a water electrolysis catalyst to substitute for a noble metal catalyst such as $IrO_2$ and $RuO_2$. In this study, the sol-gel method is used to synthesize the $Cu_xCo_{3-x}O_4$ catalyst for the oxygen evolution reaction (OER),. The CuxCo3-xO4 is synthesized at various calcination temperatures from $250^{\circ}C$ to $400^{\circ}C$ for 4 h. The $Cu_xCo_{3-x}O_4$ synthesized at $300^{\circ}C$ has a perfect spinel structure without residues of the precursor and secondary phases, such as CuO. The particle size of $Cu_xCo_{3-x}O_4$ increases with an increase in calcination temperature. Amongst all the samples studied, $Cu_xCo_{3-x}O_4$, which is synthesized at 300?, has the highest activity for the OER. Its onset potential for the OER is 370 mV and the overpotential at $10mA/cm^2$ is 438 mV. The tafel slope of $Cu_xCo_{3-x}O_4$ synthesized at $300^{\circ}C$ has a low value of 58 mV/dec. These results are mainly explained by the increase in the available active surface area of the $Cu_xCo_{3-x}O_4$ catalyst.