• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.1881-1900
• /
• 2014

Since 802.11 wireless LANs are so widely used, it has become common for numerous access points (APs) to overlap in a region, where most of those APs are managed individually without any coordinated control. This pattern of wireless LAN usage is called the private OBSS (Overlapping Basic Service Set) environment in this paper. Due to frame collisions across BSSs, each BSS in the private OBSS environment suffers severe performance degradation. This study approaches the problem from the perspective of congestion control rather than noise or collision resolution. The retry limit, one of the 802.11 attributes, could be used for traffic control in conjunction with TCP. Reducing the retry limit causes early discard of a frame, and it has a similar effect of random early drops at a router, well known in the research area of congestion control. It makes the shared link less crowded with frames, and then the benefit of fewer collisions surpasses the penalty of less strict error recovery. As a result, the network-wide performance improves and so does the performance of each BSS eventually. Reducing the retry limit also has positive effects of merging TCP ACKs and reducing HOL-like blocking time at the AP. Extensive experiments have validated the idea that in the OBSS environment, reducing the retry limit provides better performance, which is contrary to the common wisdom. Since our strategy is basically to sacrifice error recovery for congestion control, it could yield side-effects in an environment where the cost of error recovery is high. Therefore, to be useful in general network and traffic environments, adaptability is required. To prove the feasibility of the adaptive scheme, a simple method to dynamically adjust the value of the retry limit has been proposed. Experiments have shown that this approach could provide comparable performance in unfriendly environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8B
• /
• pp.514-524
• /
• 2005

In optical burst switching(OBS) networks, the ingress edge router assembles packets in the same class queue into the appropriate size of burst. A burst control packet(BCP) is generated for channel reservation of corresponding data burst and sent earlier than the corresponding data burst with an offset time. Offset time is determined considering the number of hops from source to destination and the required quality of service(QoS). After offset time, the burst data is passed through tile pre-configured optical switches without any O/E/O conversion. But a failure in OBS networks may lead to the loss of bursts until the ingress nodes receive the failure indication signal. This results in a significant degradation in QoS. Therefore, in this paper, we propose a fault-tolerant node architecture based on sub-carrier multiplexing to reduce the effects of failure in OBS networks. The Performance of the proposed fault-tolerant node architecture exhibits considerable improvement as compared with the previous ones.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.640-652
• /
• 2012

Many studies have investigated the smart grid architecture and communication models in the past few years. However, the communication model and architecture for a smart grid still remain unclear. Today's electric power distribution is very complex and maladapted because of the lack of efficient and cost-effective energy generation, distribution, and consumption management systems. A wireless smart grid communication system can play an important role in achieving these goals. In this paper, we describe a smart grid communication architecture in which we merge customers and distributors into a single domain. In the proposed architecture, all the home area networks, neighborhood area networks, and local electrical equipment form a local wireless mesh network (LWMN). Each device or meter can act as a source, router, or relay. The data generated in any node (device/meter) reaches the data collector via other nodes. The data collector transmits this data via the access point of a wide area network (WAN). Finally, data is transferred to the service provider or to the control center of the smart grid. We propose a wireless cooperative communication model for the LWMN.We deploy a limited number of smart relays to improve the performance of the network. A novel relay selection mechanism is also proposed to reduce the relay selection overhead. Simulation results show that our cooperative smart grid (coopSG) communication model improves the end-to-end packet delivery latency, throughput, and energy efficiency over both the Wang et al. and Niyato et al. models.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1211-1218
• /
• 2010

OSPF is the optimized routing protocol in wired network and considered as a tactical routing protocol in wireless tactical communication network. However because it is designed basically based on wired environment, it runs inadequately in wireless tactical environment: noise and jamming signal. So, we proposed new OSPF cost function to develop active routing protocol in wireless tactical communication network. In redefined cost function, there are four parameters that are relative transmission speed, link weight, router utilization, link average BER(Bit Error Rate). These parameters reflect wireless tactical characters. Also, we remodel the option field in Hello packet. It can help user to periodically check the link state. From the simulation result, it is shown that proposed OSPF is better than OSPF in jamming situation and has accumulative delay gain with dispersion of traffic load in entire network.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.61-67
• /
• 2004

This paper describes the importance of the network equipment markets and the necessity of the testing and the verification for the network equipments and the effective system for network equipment test. With the rapid internet service development, the demands of the network equipments(for example, router, switching equipment etc.) are expanded. The network equipments request the high love technologies, so the foreign network equipments are prevailed in the domestic market. But the development of the network equipments in korea is in the beginning stage. To deploy the network equipments into the real network the network equipments should be tested and verified by the certified test labs. To get the verification from the foreign test lab, it takes a lot of expenses and times. For the competitiveness of our products in the international markets, the technique of the test and verification on the network equipments should be level-up. This paper investigates the network equipments market condition and the network equipments test condition in Korea. For the competitiveness of our commodities in the international markets, this paper proposes the testing strategy for network equipments.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.99-107
• /
• 2010

SNMP(Simple Network Management Protocol) is most commonly used as a standard protocol for effective network management by supporting the increasing size of the network and the variety of network elements such as router, switch, server and so on. However, SNMP has performance drawbacks of network overhead, processing latency, and the inefficiency in data retrieval. In this paper, we propose two schemes to improve the performance of SNMP; 1) the first scheme to reduce the amount of redundant OID information within a SNMP-GetBulk response message, 2) the second scheme of newly proposed SNMP-GetUpdate message combined with the cache in MNS. Through the analysis with real experiments, we show that our first scheme reduces the network overhead and the second scheme improves the processing latency and the retrieval of SNMP MB tables. And, therefore the scalability of network management can be improved.

• Journal of Convergence Society for SMB
• /
• v.4 no.3
• /
• pp.1-6
• /
• 2014

DDoS (Distributed Denial Service, Distributed Service) attacks are being generated for a constant threat on the Internet, countermeasures for this have been proposed. However, the problem has become an increasingly effective instruction in any Measures are a variety of attacks and sophisticated attacks. Attackers can change a steady attack tools to respond to these, the experts as a countermeasure to this constantly research for a fresh attack. This paper is to introduce countermeasures to DDoS recent representative examples of 7.7DDoS and look for 3.3DDoS existing types of DDoS attacks increased PPS attacks, high traffic sent, web service delay and router and firewall settings, applications and to describe the DDoS countermeasures research by certification, is so that you can plan effectively for the future DDoS attacks proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.165-173
• /
• 2006

Network Mobility Basic Support protocol enables mobile network to change their point of attachment to the Internet, but causes some problems such as suboptimal muting and multiple encapsulations. The proposed scheme, combining Prefix Delegation protocol with HMIPv6 concept can provide more effective route optimization and reduce the amount of packet losses and the burden of location registration for handoff. It also uses hierarchical mobile network prefix (HMNP) assignment and provides tree-based routing mechanism to allocate the location address of mobile network nodes (MNNs) and support micro-mobility. In this scheme, Mobility Management Router (MMR) not only maintains the binding informations for all MNNs in nested mobile networks, but also supports binding procedures to reduce the volume of handoff signals oyer the mobile network. The performance is evaluated using NS-2.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.93-99
• /
• 2009

The Internet Engineering Task Force (lETF)proposed the Mobile IPv6 protocol to provide host mobility in IPv6-based network and to offer a standardized technology. However, Mobile IPv6 (MIPv6) is not applied in actual network because of long handover latency and packet loss problems. Therefore, to compensate these drawbacks, many studies are in progress and FMIPv6 (Fast handover for Mobile IPv6) is one of the studies that has been proposed to supplement the shortcomings of MIPv6. But there are problems occurred in using router tunneling which causes packet loss and out of sequence problems. In this paper, we propose an Advanced Mobile IPv6 (AMIPv6) protocol to minimize the handover latency when Mobile Node frequently moves in each subnet. We compared the performance analysis of AMIPv6 handover latency with MIPv6 handover latency in the same network environment to prove that AMIPv6 is more efficient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.349-356
• /
• 2015

In this paper, MIMO antenna with low correlation for LTE band 5(824~894 MHz) was designed by adopting monopole antenna and slot antenna. Based on ground characteristic mode theory, MIMO antenna was designed using different types of antennas for enhancement of correlation. MIMO antenna using PIFA and slot type antennas is proposed and correlation coefficient was compared with MIMO antenna using two PIFAs. Average correlation coefficient of MIMO antenna using two PIFAs was 0.71 but the proposed MIMO antenna had very low correlation coefficient of 0.17.