• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.3
• /
• pp.237-250
• /
• 1998

In this study, the characteristics of electrostatic bag filter to overcome the main problems such as the high pressure drop and low collection efficiency for submicron particles are investigated with the experimental parameters. Especially, the experiment is carried out focusing on collection efficiency and pressure drop change mechanism as a function of discharge electrode shapes and filter properties, including the applied voltages, filtration velocities and particle concentrations, etc . Results show that the collection efficiency is improved over 30% for the fine particle below 1 pm and pressure drop reduction ratio (PDRR) increases in the following order 4 mm screwy > 4 mm square > 4mm round discharge electrodes . For the filter properties, Nomex is more effective than PE under the influence of electrostatic force. Applying 30 kV for a screwy discharge electrode, higher overall collection efficiency is maintained in spite of the increment of filtration velocity over four times (8 m/min) in comparison with that of 2 m/min and PDRR are highly shown over 80o1o with various filtration velocities, 5, 8, 11 m/min.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.49-55
• /
• 2020

Recently, when a new component of construction equipment is designed, a stamping process capable of producing parts having high appearance quality and precision has been gaining attention. However, in general, as it is developed based on existing parts made by welding metal sheets and tubes, frequent to die modification occurs, which increases the time and cost of developing new parts. Thus, it is necessary to reduce the cost by shortening the die development period. In this study, a stamping process was designed for the urea tank cover, which is a part for excavators, to reduce the die development period through sheet metal forming analysis. The stamping process was designed by determining the blank holding force after selecting the initial blank shape and size. The round value at the corner was modified such that formability is ensured. After selecting process parameters, the thickness reduction rate and spring-back effect were reviewed.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.97-102
• /
• 1998

In the most cases of eigen value problems in the social sciences, the object matrix to analyze is real-valued symmetric matrix. And many cases of eigen value problems in this field needs 2-4 eigen pairs according to the magnitude of their absolute values. The methods to obtain eigen pairs by numerical computation using computer, we would face the problem of round off error because matrix computation needs a number of calculations. In this paper, an algorithm which make us to get some needed eigcn pairs according to the magnitude of their absolute values is designed. And in this algorithm, the power method is used to obtain some eigen pairs. This algorithm is expected to be effective by the reduction of the number of calculations.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.276.2-278
• /
• 2000

In a recent years, a number of approaches have been studied, including passive, active, and hybrid mode-locking of semi-conductor lasers for short pulse generation and research has been devoted to achieve low timing-jitter operation since the timing jitter is unfavorable for system applications. Among the methods of mode locking, passive mode locking does not need external rf drives, and therefore the operation and fabrication procedures are simplified. In spite of these attractive advantages of passive mode-locked laser, it has critical drawbacks such as large timing jitter and the difficulty in synchronization with external circuits. Their inherent large timing jitter value was shown to be suppressed to certain levels by means of hybrid mode-locking technique$^{(1)}$ , where the saturable absorber section was modulated by an external signal with the cavity round trip frequency. Furthermore, the subharmonic mode-locking (SHML) technique alleviates the restrictions of high speed driving electronics. It has been demonstrated experimentally$^{(1)}$ that the hybrid subharmonic mode-locking technique has lead to significant reduction of the timing jitter. (omitted)

• International Commerce and Information Review
• /
• v.10 no.2
• /
• pp.305-323
• /
• 2008

Climate change is one of the broadest and the most complex issues of international environmental cooperation. Concern about climate change has been steadily increasing and has become a worldwide issue. According to IPCC(Intergovernmental Panel for Climate Change)'s recently report, global warming has accelerated vest serious problems. GHG(Green House Gas) emissions trading schemes, including the Kyoto mechanism that spread to solving the problems. Based on the evaluation on GHG emissions trading schemes, we also find some policy implications on the future development of emissions trading the conventional air pollutants in Korea which start to 2007. The regulatory authority needs to make clear how to allocate allowances to new entrants and also to keep the balance between the opportunity costs of reduction between potential shutdown facilities and new entrants. Under the current rule that does not allow shutdown credits, an equivalent level of allowances needs to be allocated to new entrants free of charge. We believe our policy recommendations may be useful not only for Korea but also for a the other countries, since they are facing a similar policy environment as Korea, particularly in the case of climate change.

• Preventive Nutrition and Food Science
• /
• v.6 no.2
• /
• pp.91-95
• /
• 2001

Competitive indirect enzyme linked immunosorbent assay (Ci-ELISA) was used to obtain the preliminary data for the detection of irradiated beef. Ci-ELISA was individually formatted with polyclonal antibodies produced from 2 kinds of bovine proteins, myosin and bovine serum albumin (BSA). Beef round, loin and tender loin were vacuum-packaged and subdivided into 3 groups of 1) irradiation; 2) irradiation and chilled at 4$^{\circ}C$ for 7 day; 3) irradiation and frozen at 2$0^{\circ}C$ for 2 months to observe the changes under different storage and/or distribution conditions. Irradiation was performed at 3, 5 and 7 kGy. Protein solutions prepared from the sample were tested by formatted Ci-ELISA. Detected concentrations of myosin and BSA decreased with the increased irradiation dose in all samples with different reduction rates. Myosin was more susceptible to freezing than BSA. Samples irradiated at 5 kGy or above could be differentiated from non-irradiated ones by Ci-ELISA. These results indicate that immunological assay can be used as a detection method for irradiated beef.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.34-41
• /
• 1999

To examine the increase of paper strength by solvent-bonding using N-methylmorpholine N-oxide (NMMO), a paper was treated with aqueous solutions of NMMO, concentrated at $90^\circ{C}$ for selected periods of time, and pressed for 5 seconds followed by washing and drying. The effect of the increasing NMMO concentration on bonding state and some important properties of samples were mainly investigated. With increasing concentration of NMMO, the degree of bonding between fibers was increased, the fiber cross-sectional shape was changed from 'thin ribbonlike' to 'round rodlike' by swelling with solvent, and the longitudinal waves (crimp) were introduced to fibers, hence the shrinkage, weight per unit area, and thickness of paper were increased. Consequently, the tensile strength and elongation, under standard and wet conditions, and the stiffness were increased, and the water absorption was decreased generally with increasing concentration of NMMO. The moisture regain of treated samples was lower than that of the untreated sample, because of the reduction of space between fibers. But the moisture regain was increased a little with increasing concentration of NMMO due to the fiber swelling with NMMO followed by structural relaxation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.8
• /
• pp.546-552
• /
• 2015

In the previous study, the air flow noise around 1.6 k~1.8 kHz was analyzed, and could be reduced by machining a groove in the bore of compressor inlet in front of the main blades of a compressor wheel. It was proven that this groove was very effective for removing the noise without critical sacrifice of compressor performance, and in addition, it did not noticeably deteriorate vehicle performance, drivability and acceleration. It is interesting that the type of groove tried for 1.6~1.8 kHz noise reduction could be effective for another air flow noise, 4 k~6 kHz which is the 3rd order frequency range of turbocharger speed. This study tried various shapes of grooves for minimizing engine performance difference as well as reducing the 3rd order noise. Finally, it was shown that the groove should be round for the engine performance, and an optimal size exist for the noise and the engine performance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1015-1025
• /
• 2003

This paper proposes a method for constructing the virtual characters adopting the personal body types for the clothing coordination. At first, the method produces the 38 kinds of the Korean 3D body models considering sex, ages and body types, and constructs model DB. We select a model similar to the personal body size from DB and deform the selected model according to body size. The method deforms the model linearly for height 12 items, width 6 items, depth 5 items and round 13 items, and constructs the personal character fitted to the personal body size. The preprocess for model deformation consists of grouping for body part and establishing the feature points. Linear deformation for each group leads us to easy construction of the virtual personal characters. This method has two advantages as follows: 1. Large reduction of man power, cost and time for DB construction of the body 3D models, since the preprocess permits us to effectively use the various body models whose geometrical structures are different, 2 Suitability to Web-based clothing coordination, since the body deformation method is simple and its speed is very high.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.4
• /
• pp.196-205
• /
• 2012

The purpose of this study is to enhance the hardenability and the mechanical properties by the addition of alloying elements such as Ni, Cr, Mo and B for the development of Cr-Mo plastic mold steel with uniform hardness and microstructure. The ingots were prepared by vacuum induction melting and forged to ${\Phi}35mm$ round bar. Forged bars were quenched and tempered at $200{\sim}600^{\circ}C$ for 1.5 hour. Jominy test, boron distribution observation, microstructual observation, tensile test and charpy impact test were conducted. It was confirmed that the hardenablity of these steels was improved by increasing of alloying elements and further promoted by the addition of boron. The critical rate of cooling required to obtain the bainitic structure for 0.27C-1.23Cr-0.28Mo-B steel was $0.5^{\circ}C/sec$. Hardness and strength of Cr-Mo steels decreased with increasing tempering temperature, but elongation and reduction of area increased with increasing tempering temperature. However, impact energy tempered at $400^{\circ}C$ showed the lowest value in the range $200{\sim}600^{\circ}C$ due to the temper embrittlement.