• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.206-209
• /
• 2000

Groove pressing which is analogous to groove rolling in the aspect of deformation mode was designed and influence of the uncommon shear deformation on the development of texture and R value was investigated. Texture developed by the groove pressing were measured as well as predicted. It was found out that the main component in the developed texture was {40。, 45。, 0。} in ODF which was regarded as a rotated Bs component and rarely observed in a plain rolling. The maximum R value was predicted to be 3.8 in 45。 direction which might be attributed to the new component.

• Transactions of Materials Processing
• /
• v.9 no.4
• /
• pp.421-427
• /
• 2000

The present study has focused on the development of shear textures during groove pressing in an aluminum alloy sheet. The shear components 23 and 13 developed during the groove pressing process. The process consisting of two steps of grooving and flattening each effectively gave rise to a high shear deformation In the sheet without reduction in thickness. The main texture component obtained from the process was the rotated Bs-orientation. The evolution of shear components during the groove pressing caused an increase in R-value of aluminum sheet comparing to a normally processed rolled sheet.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.169-172
• /
• 2001

본 논문에서는 회전된 문서에서의 회전각 검출과 문서에 포함된 그림, 글자, 표, 직선과 같은 구성요소를 자동으로 분석하고 분류하는 방법을 제안한다. 본 연구는 입력영상을 획득하는 과정에서 발생되는 회전각에 의해 발생되는 오류를 최소화하기 위한 회전각 검출단계, 각 구성요소 검출에 불필요한 배경제거 단계, 각 구성요소의 특성을 통한 구성요소 분류단계로 이루어진다. 제안한 문서 인식 시스템의 성능 평가를 위해서 다양 한 문서에 제안한 방법을 적용하고, 성공적인 결과를 보인다.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.164-164
• /
• 2004

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.161-164
• /
• 2002

We propose a new method for rotational image retrieval that it is based on highly related property between a spatial image and wavelet transform. The characteristics have an important role in the design of our algorithm. Our proposed algorithm for rotational image retrieval is to obtain same image or rotated image. Because our algorithm used an rotational image retrieval.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.88-98
• /
• 1993

In this paper, the effective permittivity in the piezoelectric material is numerically obtained and greens function is derived from that. It is shown that the admittance and the transfer function of an interdigital transducer is represented by electrostatic charge distribution using Quasi-static approximation. To prove the validity of the quasi-static approximation, numerical results for the uniform IDT of a filter mounted on 128 $^{\circ}$ rotated Y-cut X-propagating Lithium Niobate are compared with the measured ones.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1084-1087
• /
• 2000

This paper presents a new approach to evaluate the maximum number of simultaneous switching gates of a given combinational circuit. The new approach is based on an iterative method proposed by Sinogi et al. and applies a simulated annealing strategy to search jot a new solution. The experimental evaluation using ISCAS’85 benchmark circuits shows that the proposed approach has attained an excellent improvement compared with other rotated methods including the iterative method.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2549-2551
• /
• 2003

We propose character recognition system for Gerber files. The Gerber file is the vector-formatted drawing file for PCB manufacturing. To consider the special vector format and rotated characters, we develop segmentation and feature extraction method. The modularized neural network is then applied to the recognition algorithm. Finally, comparative simulation results are presented to verify the usefulness of the proposed method.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.217-222
• /
• 1990

A general ray tracing scheme has been developed for using a personal computer which trace finite rays through any non-rotationally symmetric system. This scheme may be used for the surface type such as conic section with or without aspherics, toric surfaces, sagittal and tangential cylindrical sections and axicons. Specially, any combinational of decentered, tilted and rotated surfaces has been considered. Before transfering to the next surfaces, the local coordinates are refered back to an initial reference coordinate system. We can get a mathmtical model of a non-rotationally symmetrical finite ray trace running on an inexpensive personal computer.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.74-77
• /
• 2007

Primary charging roller rotated with contacting surface of OPC drum and take charge OPC drum. Owing to this reason, primary charging roller made by elasticity substance with electric conduction. Properties of charging and image changed by class of coating, method of coating and environment. This study developed about coating method to make print image of good quality.