• 한국산업융합학회 논문집
• /
• 제6권2호
• /
• pp.131-139
• /
• 2003

The links operating interrupted flow are intend to yield the traffic between the out flow and inflow part effect zone of street section, we build the delay model using the time gap between under construction and not. We review the applicability of interrupted flow, and thus we can put this data to practical use as the basis data to compute the inducement charge for traffic delay. Also building about traffic effect zone of interrupted flow wouldn't produce at the section beside occupying roads and construction cross section, thus we must review the plan to minimize traffic delay by the construction occupying road. In future there must be advanced the incomplete in this study, and groping for the various alternatives to minimize the traffic delay by the road occupying construction, with developing the various sets of detailed analyzing models, that is analysis on the street strength, crossroads geometrical forms of crossroads, public traffics, pedestrians, occupying types.

• 한국주거학회논문집
• /
• 제19권1호
• /
• pp.1-8
• /
• 2008

This study is an attempt to understand the floor-specific characteristics of facade road traffic noise in apartment buildings. For this purpose, it sampled a total of seven roadside apartment building complexes: three with no soundproof bar barrier installed at roadside, one with a forest buffer zone, one with a sound-absorbing hill, and two with soundproof barriers. The measured noise level was highest on the 5th floor of apartment buildings with no soundproof barrier, and the upper stories from the 5th floor showed lower-noise measurements in order. For apartment buildings with soundproof barriers, however, the noise level was lower on the 10th floor than the 5th floor. Two apartment building groups--one with a sound-absorbing hill and the other with no soundproof barrier--showed similar measurement results in the floor-specific characteristics of facade road traffic noise. This suggests that such installations have little sound insulation effect. In the apartment building complex with a forest buffer zone around it, a slight sound insulation effect was measured on the lower floors of the buildings.

• 한국ITS학회 논문지
• /
• 제9권5호
• /
• pp.38-48
• /
• 2010

이상기후는 도로교통 사고 위협요소로써 빈번하게 심각한 영향을 주고 있다. 특히, 도로교통에서 기상변화 또는 재해에 의한 영향은 장대교량, 터널, 사면 및 결빙 지역에서 영향이 크기 때문에 이들 지역에 대한 관심 있는 관리가 필요하며 발생할 수 있는 사고를 줄이기 위해서도 집중적인 도로 관리와 도로 기상 정보 제공 및 조기 경보, 도로 순찰, 교통통제와 같은 요소들이 필요하다. 도로의 눈과 결빙은 제설로 위험을 줄일 수는 있으나, 강풍은 피할 수 없는 요소이다. 본 연구에서는 도로 기상 정보와 기후, 재해 정보를 활용하여 국지 지역에서 안전운전을 위한 경보 정보를 설계를 하고자 한다. 극한 기상에 노출된 운전자를 위한 최상의 경보 정보 설계는 도로 상황 감시 개선, 도로 기상정보 감시, 정확한 사용자 정보전달들이 될 것이며, 또한 바람 및 재해 상황에 대한 통계, 표면 조건 통계, 차종 및 차종에 따른 바람에 의한 사고 통계와 조기 경보 정책과 교육들도 이를 위해서는 수반되어야 할 요소들이다.

• Geomechanics and Engineering
• /
• 제35권5호
• /
• pp.511-523
• /
• 2023

Canal-side roads frequently collapse due to an unexpectedly greater soft-clay thickness with a rapid drawdown situation. This causes annually increased repair and reconstruction costs. This paper aims to explore the effect of soft-clay thickness on the failure in the canal-side road in the case study of Phra Nakhon Si Ayutthaya rural road no. 1043 (AY. 1043). Before the actual construction, a field vane shear test was performed to determine the undrained shear strength and identify the thickness of the soft clay at the AY. 1043 area. After establishing the usability of AY. 1043, the resistivity survey method was used to evaluate the thickness of the soft clay layer at the failure zone. The screw driving sounding test was used to evaluate the undrained shear strength for the road structure with a medium-stiff clay layer at the failure zone for applying to the numerical model. This model was simulated to confirm the effect of soft-clay thickness on the failure of the canal-side road. The monitoring and testing results showed the tendency of rapid drawdown failure when the canal-side road was located on > 9 m thick of soft clay with a sensitivity > 4.5. The result indicates that the combination of resistivity survey and field vane shear test can be successfully used to inspect the soft-clay thickness and sensitivity before construction. The preliminary design for preventing failure or improving the stability of the canal-side road should be considered before construction under the critical thickness and sensitivity values of the soft clay.

• 한국조경학회지
• /
• 제39권3호
• /
• pp.107-116
• /
• 2011

도시의 온도상승의 주요 인자 중 하나가 도시부 도로이다. 본 연구의 목적은 도시도로 녹지가 표면온도의 저감에 영향을 미치는 요인을 파악하는 것이다. 이를 위해 서울시 도로 18개 지점을 선정하여 도로횡단구성요소(주변토지이용, 차도, 보도, 식수대, 중앙분리대)별로 열화상 카메라로 표면온도를 조사하고, 도시도로 녹지 면적을 측정하였다. 도시도로 녹지의 도로 표면온도 저감에 미치는 영향을 분석한 결과 도로 주변토지이용이 녹지 및 오픈스페이스일 경우 도로온도에 미치는 영향이 가장 크며, 식생중앙분리대의 면적, 식수대의 면적 순으로 표면온도를 저감시키는 것으로 나타났다. 도로주변 뿐만 아니라 도로설계의 구성요소 내에서 식수대, 중앙분리대 등의 녹지면적 증가는 도로의 표변온도 저감에 영향을 미친다. 도시의 고온화현상을 완화하기 위하여 도시도로 녹지 면적을 증가시키는 것도 한 방편이다.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.109-117
• /
• 2014

PURPOSES : This study analyzes the available working time at work-zone on the Expressway in accordance to the new capacity manual. METHODS : Sensitivity analysis on variables were conducted to calculate the adjusted capacity at work-zone based on previous researches. RESULTS : The main factors which affect available working time at the work-zone were its capacity, number of lanes, terrain and lane width. Other factors have minimal effect on the available working time. Based on the analysis, a calendar of lane closures was suggested. CONCLUSIONS : A series of studies concluded that the capacity at work-zone in the new capacity manual reduced to 76-82% of the existing manual. As such, the available working time decreased. Furthermore, the factors affecting the available working time needs to be considered when making a plan to rehabilitate the distressed pavement.

• 한국ITS학회 논문지
• /
• 제20권5호
• /
• pp.130-145
• /
• 2021

스마트 서울 정책의 일환으로 도시 빅데이터 활용의 중요성이 부각되고 있으며, 미세먼지, 소음과 같이 교통과 관련된 도시환경 요소가 시민들의 삶의 질에 미치는 영향에 대한 사회적 관심이 증가하고 있다. 본 연구에서는 IoT 도시 빅데이터와 교통 빅데이터를 매칭하여 통합 DB를 구축하고, 이를 활용하여 특정 공간이 도로 영향권 내에 포함되는지 여부에 따라 미세먼지, 소음 피해에 유의한 차이가 있는지 분석하였다. 또한 시계열 클러스터링을 통하여 도로교통특성 및 환경요인들이 유사한 특성을 가지는 공간 단위들을 군집화하였으며, 이 결과를 통하여 미세먼지 또는 초미세먼지 hot-spot, 소음 hot-spot 등 도시공간 단위의 환경위험 관리를 체계적으로 구축하는 기반을 마련하고자 하였다.

• 국토계획
• /
• 제54권2호
• /
• pp.33-45
• /
• 2019

The Legal Floor Area Ratio (L-FAR) has been used as a major urban planning tool for efficient management of land use, landscape, and density. The Developed Floor Area Ratio (D-FAR) in each parcel is realized by such physical and institutional factors as urban tissue, local characteristics, and zoning with the L-FAR. The Achieved Floor Area Ratio (A-FAR), the ratio of the D-FAR to the L-FAR, is the relationship between realized density and the intended/desired outcomes of the regulations. The A-FAR informs the efficiency of L-FAR and its effect on parcels, and is an indicator of the demands of real estate developments under the zoning regulation. This study used detailed data of each parcel's characteristics, including parcel size, road width, and the number of roads bordered by a parcel, to identify the influencing factors on A-FAR. This analysis confirmed that the parcel size has a non-linear negative effect in the residential zone but a linear positive effect on A-FAR in the commercial zone. The width of the parcel's frontage in the commercial zone has a positive effect on the value, while in the residential zone the narrower width has higher A-FAR. In Seoul, the residential zone has higher A-FAR than the commercial zone, which means that the former has a relatively higher development pressure but a lower designated L-FAR. This result reflects that Seoul's residential zone absorbs the demand of commercial uses because of the significant permitting of mixed land use and has high-density residential buildings.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.39-47
• /
• 2016

PURPOSES : Road subsidence occurs owing to road cavities, which cause many social and environmental problems, especially in cities. Recently, road cavities were detected by various ground radars and repair works were carried out against the detected cavities. The condition assessments related to the road cavities are necessary to understand the potential risk of the cavities. Therefore, in this study, a numerical study was performed to assess the various conditions of road cavities. METHODS : The numerical method adopted in this study is the discrete element approach, and it is suitable for analyzing the condition because it can consider the movement of the soil particles in the surrounded cavity areas. In addition, the triaxial test was modeled and performed under various cavity conditions inside the specimens. RESULTS : The conditions of different cavity locations and shapes were analyzed to identify the effect of cavity state. Three general cases of particle size distributions were formulated to identify the effect of surrounding ground conditions. As a result, the degree of decrement and volumetric strain were varied depending on the locations and shapes of the cavity. Only minor changes were observed when the particle size distributions were altered. CONCLUSIONS : The strength reduction was higher when the cavity formed was larger and located in the upper zone. Similar to the cavity shape, strength reduction and volume deformation are more influenced by the width than the length of the cavities. There is an influence from ground conditions such as the particle size distribution, especially on the wide cavity.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.79-82
• /
• 2006

This paper presents to examine the ability of an electrical resistivity method to monitor the grouting effect at subsidence area. To monitor the changes in ground resistivity before and during the grout, series of electrical resistivity monitoring surveys have been conducted. Data has acquired in the form of grid making nine lines parallel to road and four lines traverse the road. Two kinds of electrode arrays modify pole-pole and dipole-dipole arrays were used during resistivity data acquisition. In this paper, the results show that electrical prospecting is an effective method to detect low resistivity imaging zone by grout during the ground reinforcement.