• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.471-474
• /
• 2007

On the road, geometric structure such as horizontal alignment, vortical alignment and crossing inclination ate important to explain characteristics of road and safety analysis. Especially, horizontal and vortical alignment are have to do with safety of covering. In existing road, for the safety analysis or alignment improvement and expansion pavement, it needs alignment factor of road. Alignment factor of road can be acquired by design drawing. But, design drawing can be not exist because of rack of facility management and national policy that centered to construction. And also, existing design drawing have a lot of differences in comparison with another existing design drawing cause of alignment improvement. In this case, for the precise analysis of alignment, 3-dimensional location information on the road centerline and acquisition of location information which related geometric structure are must to be preceded. In this study, therefore, it provide alignment factors which needed to alignment improvement and road safety analysis by acquisition of road space information and extraction of road centerline data using LiDAR data.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.15-20
• /
• 2001

In this study, several basic data for road design and GIS data were used for selecting the optimized road alignment database system. The cut and fill volumes were compared with existing manual road design method through the analysis and data application in this database system. We solved and estimated objective, economic, environmental and technical problems caused in road construction comparing existing manual method with the road alignment which was selected in GIS automatically. Also, we performed three dimensional simulation with the existing road design program and simulation of virtual reality through Virtual GIS. This study showed the method in selecting the optimized road alignment through the analysis and comparison of the selected road alignment. The goal of this study is comparison and analysis of definite cut and fill volume and environmental problem after the road construction through analyzing and comparing the social, economic, technical and environmental aspect in the road alignments with various statistic data.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2012

The horizontal alignment of road is deeply related with the stability of the road and traffic capacity. It is necessary to analyze horizontal alignment of road accurately for efficient maintenance of the road and relevance judgment about the standard. Recently the study on horizontal alignment of road using Lidar data and GPS was concluded, but they were many problem analyzing horizontal alignment radius of curvature in wide area. In this study, the tool which the radius of curvature can evaluate the suitability about "Rules about the Road Structure & Facilities Standards" by using center lines of the road of the digital map tries to implement on GIS. The interface was designed and implemented which can automatically estimate the Road Centerline Horizontal Alignment by using $ESRI^{(R)}$ $ArcObject^{TM}$.

• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.11-22
• /
• 2015

Government efforts for green growth policy initiatives demand low-carbon technologies in the road construction industry. The purpose of this paper is to develop an algorithm of a road alignment design solution for establishing the multi-dimensional information, and to calculate carbon emission quantity due to the geometric design elements in the planning phase of road alignment. The paper developed a calculation method for carbon emission quantity by drawing a speed profile reflected in the operating speed, acceleration and deceleration, which are majors factor of carbon emissions while driving and by applying a carbon emission factor. From this effort, it enabled alignment planning to reduce carbon emission. Object-based parametric design methods of the cross-sections were proposed for alignment planning, and the paper demonstrated a BIM-based road alignment planning solution. The proposed solutions can provide multi-dimensional information on carbon emission quantity and cross section elements through driving simulation. It is expected to allow construction of eco-friendly roads by deriving optimal road alignment to minimize environmental costs.

• Spatial Information Research
• /
• v.10 no.3
• /
• pp.469-480
• /
• 2002

Nowadays, digital maps of 1:5,000 scale are used to plan and review far road alignment design. However, the updating and modifying period of digital maps is not so harmonious as topographical changes caused by rapid developments can be reflected in digital maps, the different areas between real surface and digital map can be found easily. This research is aimed to suggest that the use of high resolution satellite image is effective way to get latest topographical information for road alignment design about wide region. IKONOS satellite images were geometrically corrected, and the road alignment data previously designed by traditional procedure were overlapped on the satellite images. As a result, the satellite image maps clearly described wrong road alignment, and modification of road alignment could be accomplished adequately By these procedures, road alignment design was Improved in quality, and could be reasonable and economic design to prevent modification that would be happened in the next step of practical plan. For the geometric correction method of IKONOS images, Thin Plate Spline(TPS) transformation with large number of ground control points, as well as ortho rectification, was effective.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.29-37
• /
• 2002

Many of the traffic accidents on roads are a result of alignment defect of the roads. This alignment of the road needs to lie analyzed with accuracy for improving design of road, and it needs the design drawing of road, and coordinates of the main point. Accordingly, in this study the precision of location based on existing design drawing was compared with the data acquired by the combination of RTK GPS/GLONASS. The result of study is included within range 5cm, we would like to propose an effective and useful approach method to utilize the satellite for road alignment information system by evaluating the represented road alignment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.325-333
• /
• 2000

This paper deals with real time building of route and vertical alignment information system for the efficient and scientific management using GSIS. First, we redesigned route and vertical alignment for obtained basic data using road projector(road design main software). Using by these acquired result, we made a database on road plan and vertical alignment drawing as a basic information being used to construction of road complex information system. The main objectives in this study are the rational maintenance road planing for drawings, its database and the systematization of route information management through the fast updating, mending, supplement. Result of this study enables us to manage route information.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.47-52
• /
• 2000

This study was carried out to analyze the effects of elapsed years and physical properties on fill-slope alignment of forest road. For the study, 21 forest roads in Puy$\check{o}$-gun and Asan-shi of Chungchungnam-do were selected and fifteen factors that might influence on fill-slope alignment were analyzed. The major forms of alignment of the fill-slope in the time of construction were concave and compound. But, with the elapsed years, the concave and compound forms have decreased and linear and convex forms have increased. And fill-slope alignment was strongly related with fill-slope distance, fill-slope gradient and ground gradient among the physical properties.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2010

The road safety depend on many road factors like vertical alignment, horizontal alignment and road cross section angle. These data are hardly to get with drawings, and the real data are differ from drawings because of road pavement overlay, etc. To get these data, so many time and cost are needed, moreover it is dangerous work in heavy traffic road. In this study we obtained the road safety data with RoSSAV(Road Safety Survey & Analysis Vehicle) of Korea Institute of Construction Technology in accordance with traffic flow, and make analysis of road safety with the vertical alignment, horizontal alignment and road cross section angle data. We derived the safety improvement method in Young-dong accident prone spot and described detail method in this paper.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.425-432
• /
• 2009

Recently, reduction of road traffic noise in residential buildings has become one of the most important subjects. To reduce the road traffic noise, noise impact assessment by the road traffic prediction model is required before building construction. For reasonable road traffic noise prediction, it is required to analysis of various factors in road traffic prediction models. This paper was studied the road traffic noise propagation factors such as distance from road to building, receiver height, alignment angle of building and reflection coefficient of the building facade by two calculation models, RLS-90 and CRTN. The result showed that noise reduction was generally higher at bottom stories by ground absorption effect. The reflection coefficient of the building facade was affect of additional sound pressure level by facade reflecting. And alignment angle of building at $90^{\circ}$ was performed effective noise reduction better than $0^{\circ}$.