• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.147-158
• /
• 2010

Studies on the distribution of traffic demands have been proceeding by providing traffic information for reducing greenhouse gases and reinforcing the road's competitiveness in the transport section, however, since it is preferentially required the extensive studies on the driver's behavior changing routes and its influence factors, this study has been developed a discriminant model for changing routes considering driving conditions including traffic conditions of roads and driver's preferences for information media. It is divided into three groups depending on driving conditions in group classification with the CART analysis, which is statistically meaningful. And, elements of the driving conditions and the preferred media affecting the change of paths are classified into statistical meaningful groups through the CHAID analysis, and the major factors affecting the change of paths are examined. Finally, the extent that driving conditions and preferred media affect a route change is examined through a discriminant analysis, and it is developed a discriminant model equation to predict a route change. As a result of building the discriminant model equation, it is shown that driving conditions affect a route change much more, the entire discriminant hit ratio is derived as 64.2%, and this discriminant equation shows high discriminant ability more than a certain degree.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.4
• /
• pp.220-228
• /
• 2017

Since the fine particulate matters occurred from mainly combustion in industry and road transport effect to human respiratory health, the interest and importance are getting increased. In 2013, the World Health Organization (WHO) concluded that outdoor air pollution is carcinogenic to humans, with the particulate matter component ($PM_{10}$ and $PM_{2.5}$) of air pollution most closely associated with increased cancer incidence, especially cancer of the lung. Therefore, many researches have been studied in the quantification and data development of fine particulate matters. Currently, the Ministry of Environment and cities/regions are developing the fine particulate matter data and air emission information. Particularly just $PM_{10}$ and $PM_{2.5}$ data is used in the fine particulate matters warning and alert. The data of NOx, SOx, $NH_3$, which have the particulate matter formation potential are not well considered. Also, the researches related with particulate matter formation potential and respiratory effects by industrial sectors and cities/regions are not conducted well. Therefore, the purpose of this study is to evaluate and calculate particulate matter formation potential and respiratory effects in 11 industrial sectors and cities using NOx, SOx, $PM_{10}$, $NH_3$ data (developed by Ministry of Environment and National Institute of Environmental Research) in 2001 and 2013. The results of this study will be provided the particulate matter formation potential and respiratory effects and will be used for future the fine particulate matter researches.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.74-85
• /
• 2013

Since the underground transportation system is a closed environment, indoor air quality problems may seriously affect many passengers' health. The purpose of this study was to understand $PM_{10}$ characteristics in the underground air environment and further to quantitatively estimate $PM_{10}$ source contributions in a Seoul Metropolitan subway station. The $PM_{10}$ was intensively collected on various filters with $PM_{10}$ aerosol samplers to obtain sufficient samples for its chemical analysis. Sampling was carried out in the M station on the Line-4 from April 21 to 28, July 13 to 21, and October 11 to 19 in the year of 2010 and January 11 to 17 in the year of 2011. The aerosol filter samples were then analyzed for metals, water soluble ions, and carbon components. The 29 chemical species (OC1, OC2, OC3, OC4, CC, PC, EC, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V, Zn, $Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$, $Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were analyzed by using ICP-AES, IC, and TOR after proper pretreatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the $PM_{10}$ sources and then six sources such as biomass burning, outdoor, vehicle, soil and road dust, secondary aerosol, ferrous, and brakewear related source were classified. The contributions rate of their sources in tunnel are 4.0%, 5.8%, 1.6%, 17.9%, 13.8% and 56.9% in order.

• Journal of Korean Society of Transportation
• /
• v.10 no.1
• /
• pp.55-62
• /
• 1992

교통수요는 교통정책 및 교통시설 계획의 수립 및 평가에 중요한 영향을 미치게 되므로 교통수요의 예측은 교통연구에서 중요한 부문을 차지하고 있다. 도로밑에 설치된 전자차량감지기(Electronic Vehicle Detector)로부터 자동 수집된 링크 교통량 자료(Traffic Counts)를 주요 입력자료로 이용하여 계획지역의 기종점 통행표(Origin Destination Trip Matrix)를 작성할 수 있는 기법 들이 최근 수년동안 많이 발달하게 되었다. 이러한 새로운 기법들은 가구조사(Home Inteview), 노변면접조사(Road-Side Interview)등을 토하여 조사된 자료를 기초로하는 전통적은 4단계 교통수요추정방법(Conventional 4-Stage Estimation Method)-통행발생(Generation), 통행분포(Distribution), 수단선택(Modal Split), 교통배분(Assignment)-과 비교하여 첫째로 정확도가 높은 링크 교통량 자료를 별도의 조사를 거치지 않고서도 수집이 가능하기 때문에 조사비용이 거의 들지 않아도 되어 경제적이고, 둘째로 전통적인 수요예측방법들에서 요구되어지는 복잡한 모형수립 및 계수조정(Parameter Calibration)이 필요하지 않아 간편하고 셋째로 오래전에 작성된 기종점 통행표를 단순히 링크 교통량 자료만을 이용하여 쉽게 보완할 수 있어 지속적인 자료의 축적(Data Age-ing)이 가능하며 더 나아 가서 소위 연속적인 교통 계획 및 교통시설관리(Continuous Transport Planning and Management)를 가능케 하는 등의 여러 장점 때문에 많은 주목을 받아 오고 최근 몇 년이 꾸준히 실무에 유용하게 적용이 되고 있는 실정이다. 본 연구는 링크 교통량자료를 이용하여 기종점 통행표를 작성하기 위하여 개발된 기존의 여러 기법들 가운데 특히 용량제약조건(Capacity-Restrained Condition)하에서 기존의 방법들을 상호 검토한 후 Wardrop의 교통망 평형원칙(Wardrop's First Network Equilibrium Principle)을 만족하는 새로운 추정기법을 제의하고 이의 시험결과를 논의하는 것을 주요내용으로 한다. 링크 교통량 자료를 이용하여 기종점 통행표를 작성하는 기법들의 근본 목표는 조사된 링크 교통량(Ob-served Traffic Counts)에 가장 근접한 교통망 통행 배정 링크 교통량(Assigned Link Volumes)을 재현(Re-producing)할 수 있는 기종점 통행표들 중에서 최적의 기종점 통행표를 발견하는 것이다. 따라서 교통망에서 통행자의 여행 경로 배정을 가장 잘 반영할 수 있는 현실적인(Realistic) 교통망 통행 배정 모형(Net-work Traffic Assignment Model)의 선택은 중요한 요소가 되며 특히 교통망에 교통체증(Traffic Conges-tion)이 심할 경우 교통망 통행자 평형조건(Network Traffic Equilibrium Condition)을 고려하기 위한 특별한 처리가 요구되어진다. 본 연구는 Whllumsen(Hall, Van Vliet and Willumsen, 1980)에 의하여 개발된 ME2(Maximum Entropy Matrix Estimation)기법에서 반복식 추정방법(Sequential Estimation Method)을 사용할 경우 Wardrop의 평형조건을 만족하는 기종점 통행표를 구할 수 없다는 단점을 극복하기 위한 방안으로서 엔트로피 극대화문제와 교통망 평형 조건(Entropy Maximisation and Network Equilibrium Condition)의 두 문제를 동시에 해결할 수 있는 새로운 수식모형과 이를 풀기 위한 알고리즘(Simultaneous Solution Algorithm)을 제의하였다. 제의된 수식모형과 알고리즘을 예제 교통망(Example Network)을 이용한 시험하고 그 결과를 ME2 의 반복식 추정 방법으로부터 구한 기종점 통행표와 비교 검토하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.765-773
• /
• 2009

Currently Telematics traffic information services have been various because we can collect real-time traffic information through Intelligent Transport System. In this paper, we proposed and implemented a short-term traffic information prediction model for giving to guarantee the traffic information with high quality in the near future. A Short-term prediction model is for forecasting traffic flows of each segment in the near future. Our prediction model gives an average speed on the each segment from 5 minutes later to 60 minutes later. We designed a Bayesian network for each segment with some casual nodes which makes an impact to the road situation in the future and found out its joint probability density function on the supposition of GMM(Gaussian Mixture Model) using EM(Expectation Maximization) algorithm with training real-time traffic data. To validate the precision of our prediction model we had conducted various experiments with real-time traffic data and computed RMSE(Root Mean Square Error) between a real speed and its prediction speed. As the result, our model gave 4.5, 4.8, 5.2 as an average value of RMSE about 10, 30, 60 minutes later, respectively.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.58-69
• /
• 2012

In modern society, rooftops and underground spaces are utilized for overcoming a confined space limitation of metropolitan areas. Therefore, floor covering construction is also increasing steadily. From the user's viewpoint, skid resistance performance of floor covering methods is a very important performance criterion for safety and amenity, but an appropriate design and assessment criteria for skid resistance performance are not available. This study presents the skid resistance performance assessment method of floor covering methods considering the sidewalk skid resistance standard of Seoul city and the guideline of the Ministry of Land, Transport and Maritime Affairs(MLTM) of Korea for road safety facilities'installation and maintenance. For this research, three alternatives among urethane floor covering methods are selected and their skid resistance performance is analyzed through an experimental study. The analyzed performance is also evaluated by the skid resistance performance assessment method. Finally, the comprehensive performance assessment including the results of skid resistance performance assessment is conducted by Value Analysis(VA) in order to encourage the construction methods of floor covering which have a high skid resistance performance. As a result of VA, the particle method which the skid resistance performance is improved up to four times more than other alternatives shows the highest performance index of 83.86.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.165-173
• /
• 2015

This paper presents numerical results of static structural stability analysis in development of a vertical transfer device of a PRT(Personal Rapid Transit) vehicle. The vertical transfer of a fully occupied vehicle operating on a road network is the first attempt, which is expected to contribute to overcome the limitations of conventional 2-dimensional operation mode. In particular, the vertical transfer apparatus designed based on vertical circulating conveyors is capable of continuous transfer without time delay so that it enables to accommodate a high traffic density. This system has been frequently used in a logistics field; however, it is essential to assess a structural integrity because an external force by a vehicle weight is exerted on the conveyors in the form of a concentrated load unlike a conventional logistic transport. In this study, prior to the production process, the structural performance of the pilot design in an early stage is numerically evaluated using the commercial finite element method (FEM) solver (i.e., $Ansys^{(R)}$).

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.662-674
• /
• 2014

In this study, accident frequency prediction models were constructed by collecting variables such as geometric structures, safety facilities, traffic volume and weather conditions, land use, highway design-satisfaction criteria along 780km (4,372 sections) of 4 lane-highways over 8 areas. As for models, a fixed parameter model and a random parameter model were employed. In the random parameter model, some influences were reversed as the range was expressed based on specific probability in the case of no fixed coefficients. In the fixed parameter model, the influences of independent variables on accident frequency were interpreted by using one coefficient, but in the random parameter model, more various interpretations were took place. In particular, curve radius, securement of shoulder lane, vertical grade design criteria satisfaction showed both positive and negative influence, according to specific probability. This means that there could be a reverse effect depending on the behavioral characteristics of drivers and the characteristics of highway sections. Rather, they influence the increase of accident frequency through the all sections.

• Journal of Radiation Protection and Research
• /
• v.34 no.3
• /
• pp.115-120
• /
• 2009

Since 1990s, some events - detection of a dirty bomb in a Russian nation park in 1995, 9/11 terrorist attack to WTC in 2001, discovery of Al-Qaeda's experimentation to build a dirty bomb in 2003 etc - have showed that nuclear or radiological terrorism relating to radioactive materials (hereinafter "radioactive materials" is referred to as "nuclear material, nuclear spent fuel and radioactive source") is not incredible but serious and credible threat. Thus, to respond to the new threat, the international community has not only strengthened security and physical protection of radioactive materials but also established prevention of and response to illicit trafficking of radioactive materials. In this regard, our government has enacted or revised the national regulatory framework with a view to improving security of radioactive materials and joined the international convention or agreement to meet this international trend. For the purpose of prevention of nuclear/radiological terrorism, this paper reviews physical characteristics of nuclear material and existing detection instruments used for prevention of illicit trafficking. Finally, national detection regime against nuclear/radiological terrorism based on paths of the smuggled radioactive materials to terrorist's target building/area, national topography and road networks, and defence-in-depth concept is suggested in this paper. This study should contribute to protect people's health, safety and environment from nuclear/radiological terrorism.