DOI QR코드

DOI QR Code

Development of Vertical Separated Tubular Steel Pole

종방향 분할형 관형지지물 개발

  • Lee, Won-kyo (KEPCO Research Institute, Korea Electric Power Corporation) ;
  • Mun, Sung-Duk (KEPCO Research Institute, Korea Electric Power Corporation) ;
  • Shin, Kooyong (KEPCO Research Institute, Korea Electric Power Corporation)
  • Received : 2019.06.18
  • Accepted : 2019.09.23
  • Published : 2019.12.30

Abstract

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

Keywords

References

  1. W. K. Lee, C. H. Yun, "Development of compact towers with insulation arm in Korea," KEPCO Journal on Electric Power and Energy, vol.4, no.2, pp63-66, Dec. 2018. https://doi.org/10.18770/KEPCO.2018.04.02.063
  2. KEPCO Design Standard on structures for Transmission, DS-1111, 2013.
  3. W. Dreyer, "Special features in the design of transmission tower lines as imposed by electrical conditions," Journal of the American Institute of Electrical Engineers, 1923.
  4. General Technical Specifications of KEPCO, "Tubular Steel Pole", GS-5445, 2018.
  5. ASCE, "Design of Steel Transmission Pole Structures," ASCE/SEI 48-11, 2011.