• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.181-187
• /
• 2011

In this paper, we proposed the vision-based efficient algorithm for road slide detection like as destruction of road cut slope. The proposed algorithm defines the image region as non surveillance and surveillance which is further divided by road, boundary and non road region. After that, it find the moving block, remember the history of movement using the TTL(Time To Live) table, determine the road slide by checking the existence of moving blocks from non road region to road region together. We confirmed the proposed algorithm detected the road slide effectively through experiments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.720-728
• /
• 2012

It is important for identification of noise and vibration problem of tire to consider influence of interaction between road and tire. A quantification of road noise is a challenging issue in vehicle NVH due to extremely complicated transfer paths of road noise as well as the difficulty in an experimental identification of input force from tire-road interaction. A noise caused by tire is divided into road noise(structure-borne noise) and pattern noise(air-borne noise). Pattern noise is caused by pattern shape of tire, which has larger than 500 Hz, but road noise is generated by the interactions between a tire and a vehicle body. In this paper, we define the quantitative analysis for road noise caused by interactions between tire and road parameters. For the identification of road noise, the chassis dynamometer that is equipped $10mm{\times}10mm $ square cleat in the semi-anechoic chamber is used, and the tire spindle forces are measured by load cell. The vibro-acoustic transfer function between ear position and wheel center was measured by the vibro-acoustic reciprocity method. In this study three tires with different type of mechanical are used for the experiment work.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.159-171
• /
• 2010

Since rapid industrialization of Korean society, out-of-village roads have been greatly improved, while almost all of in-village roads have not been fundamentally improved yet. Unless village roads should be improved in relatively comparison with trunk roads, it has been widely recognized that grass rooted achievement of accessibility revolution not be realized. In this regard, this study tried to develop evaluation indicators system for improvement of village roads. The evaluation indicator system on village road conditions was proposed which is sub-categorized as structural improvement of road itself, its communication serviceability and public securing level of property rights of road site. The system has 6 indicators(2 of each subcategory);good pavement ratio and over 3m wide road length ratio, ratio of household fronting under 2m wide road and connectivity of road network, ratio of registered as 'road' in land category and ratio of publicly owned road sites. In the final conclusion, village roads in rural Korea have been generally in worse condition regardless of whether prior improvement works or not, except some of recent plan-based improvement villages.

• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.127-135
• /
• 2018

PURPOSES : This study develops various models that can estimate the pattern of road surface temperature changes using machine learning methods. METHODS : Both a thermal mapping system and weather forecast information were employed in order to collect data for developing the models. In previous studies, the authors defined road surface temperature data as a response, while vehicular ambient temperature, air temperature, and humidity were considered as predictors. In this research, two additional factors-road type and weather forecasts-were considered for the estimation of the road surface temperature change pattern. Finally, a total of six models for estimating the pattern of road surface temperature changes were developed using the MATLAB program, which provides the classification learner as a machine learning tool. RESULTS : Model 5 was considered the most superior owing to its high accuracy. It was seen that the accuracy of the model could increase when weather forecasts (e.g., Sky Status) were applied. A comparison between Models 4 and 5 showed that the influence of humidity on road surface temperature changes is negligible. CONCLUSIONS : Even though Models 4, 5, and 6 demonstrated the same performance in terms of average absolute error (AAE), Model 5 can be considered the optimal one from the point of view of accuracy.

• Journal of Environmental Science International
• /
• v.13 no.6
• /
• pp.505-512
• /
• 2004

This study was attempted to review the information data for minimizing the destruction of environmental naturalness and the visual damage of landscape from road construction by establishing a model of environmental naturalness for national roads in the suburb areas to suggest an answer to a research question, ' hat does decide the environmental naturalness of roadscape?'. We found that 1) The road-side slope showed no statistical significance in the description of environmental naturalness of roadscape, but the fact that the road-side slope from road construction is the destruction of natural topography cannot be overlooked. 2) In terms of the direction of value variations for independent variables, signboard and telegraph post, soundproofing and protection wall, structure, and building acted toward negative (-) direction, while mountains, sky, road trees, fields, and surrounding green including the road-side slope acted toward positive(+) direction. 3) The variable with highest relative contribution to dependent variables among independent variables is building, which has importance as many as 148 times of road-side slope, while the variable road-side slope has the least importance. Building has the importance of 7.22 times, mountains 5.51 times, road trees 2.59 times, surrounding green 2.54 times, structure 2.41 times, signboard and telegraph post 2.37 times, soundproofing and protection wall 2.20 times, and sky 1.32 times of the fields as a standard criterion values 1.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.425-432
• /
• 2009

Recently, reduction of road traffic noise in residential buildings has become one of the most important subjects. To reduce the road traffic noise, noise impact assessment by the road traffic prediction model is required before building construction. For reasonable road traffic noise prediction, it is required to analysis of various factors in road traffic prediction models. This paper was studied the road traffic noise propagation factors such as distance from road to building, receiver height, alignment angle of building and reflection coefficient of the building facade by two calculation models, RLS-90 and CRTN. The result showed that noise reduction was generally higher at bottom stories by ground absorption effect. The reflection coefficient of the building facade was affect of additional sound pressure level by facade reflecting. And alignment angle of building at $90^{\circ}$ was performed effective noise reduction better than $0^{\circ}$.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.157-164
• /
• 2012

Road signs serve guide informations for efficient traffic control and are regulated by Road Sign Regulation. But few road managers break the regulation because of civil complaint and cause driver's confusion. Also, as promote the road name guide signs and the new road signs on expressway, the driver's confusion being increased. This study analysis factors of driver's confusion, calculates limited information on road signs and specifies modes of driver's confusion caused by road signs. The traffic accident data during 3 years is calculated in order to see how much intimate connection between the road sign confusion and the traffic.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2012

The horizontal alignment of road is deeply related with the stability of the road and traffic capacity. It is necessary to analyze horizontal alignment of road accurately for efficient maintenance of the road and relevance judgment about the standard. Recently the study on horizontal alignment of road using Lidar data and GPS was concluded, but they were many problem analyzing horizontal alignment radius of curvature in wide area. In this study, the tool which the radius of curvature can evaluate the suitability about "Rules about the Road Structure & Facilities Standards" by using center lines of the road of the digital map tries to implement on GIS. The interface was designed and implemented which can automatically estimate the Road Centerline Horizontal Alignment by using $ESRI^{(R)}$ $ArcObject^{TM}$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.92-98
• /
• 2010

Virtual ground modeling is one of key topic for real-time vehicle dynamic simulation. This paper discusses about the virtual 3D road modeling process using parametric surface concept. General road data is a type of lumped position vector so interpolation process is required to compute contact of internal surface. The parametric surface has continuity and linearity within boundaries and functions are very simple to find out contact point. In this paper, the parametric surface formula is adopted to road modeling to calculate road hight. Position indexing method is proposed to reduce memory size and resource possession, and a simple mathematical method for contact patch searching is also proposed. The developed road process program is tested in dynamic driving simulation on off-road. Conclusively, the new virtual road program shows high performance of road hight computation in vast field of off-road simulation.

• Journal of Environmental Science International
• /
• v.16 no.7
• /
• pp.823-830
• /
• 2007

Traffic noise is a kind of noise caused by cars, trains and aircraft. Among them, noise produced by cars is the most important factor in cities. According to the National Institute of Environmental Research(NIER)'s survey, Road traffic noise levels in Susan are the highest of all the cities in Korea. So, appropriate measures for road traffic noise reduction is required. For this purpose, the construction of a noise map in Susan will playa vital role. However, road traffic noise formulas are constructed considering regional characteristics such as each country road's environment and vehicle quality. Therefore, prior to constructing a noise map in Susan, examination processes about each formula constituent status and estimation process are required preferentially. In this research, the basic first stage is to estimate Susan's road traffic noise. First, investigate characteristics of each road traffic noise estimate and using this, a noise map is constructed for road traffic noise in Susan. Then the adaptation of a road traffic noise formula is evaluated.