• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.109-119
• /
• 2022

The computational efficiency of reverse time migration (RTM) based on numerical modeling is not secured due to the high-frequency band of several hundred Hz or higher for data acquired through a three-dimensional (3D) ultra-high-resolution (UHR) seismic survey. Therefore, this study develops an RTM program to derive high-quality 3D geological structures using UHR seismic data. In the traditional 3D RTM program, an excitation amplitude technique that stores only the maximum amplitude of the source wavefield and a domain-limiting technique that minimizes the modeling area where the source and receivers are located were used to significantly reduce memory usage and calculation time. The program developed through this study successfully derived a 3D migration image with a horizontal grid size of 1 m for the 3D UHR seismic survey data obtained from the Korea Institute of Geoscience and Mineral Resources in 2019, and geological analysis was conducted.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.521-526
• /
• 2006

A membrane bioreactor (MBR) is an effective tool for wastewater treatment with recycling. MBR process has several advantages over conventional activated sludge process (ASP); reliability, compactness, and quality of treated water. The resulting high-quality and disinfected effluents suggest that MBR process can be suitable for the reused and recycling of wastewater. An anoxic/oxic (A/O) type MBR was applied to simultaneous removal of organics and nutrients in sewage. At first, the efficiency of submerged MBR process was investigated using a hollow fiber microfiltration membrane with a constant flux of $10.2L/m^2{\cdot}h$ at each solids retention time (SRT). Results showed that protein/carbohydrate (P/C) ratio increased and total extracellular polymeric substances (EPS) remained constant with SRT increased. Secondly, A/O type MBR with a reverse osmosis (RO) membrane was employed to treat the municipal wastewater. The performance of A/O type MBR-RO process is better for the treatment of organics and nutrients than ASP-MF-RO process in terms of consistent effluents quality.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.2
• /
• pp.65-73
• /
• 2013

In the simulation output analysis, bootstrap method is an applicable resampling technique to insufficient data which are not significant statistically. The moving block bootstrap, the stationary bootstrap, and the threshold bootstrap are typical bootstrap methods to be used for autocorrelated time series data. They are nonparametric methods for stationary time series data, which correctly describe the original data. In the simulation output analysis, however, we may not use them because of the non-stationarity in the data set caused by the trend such as increasing or decreasing. In these cases, we can get rid of the trend by differencing the data, which guarantees the stationarity. We can get the bootstrapped data from the differenced stationary data. Taking a reverse transform to the bootstrapped data, finally, we get the pseudo-samples for the original data. In this paper, we introduce the applicability of bootstrap methods to the time series data having trend, and then verify it through the statistical analyses.

• Development and Reproduction
• /
• v.16 no.3
• /
• pp.227-233
• /
• 2012

Circadian timing system plays a major role in a wide range of reproductive function. However it is plausible idea that other environmental and/or internal cue might be simultaneously participated in the optimal regulation of reproductive system. In the present study we extended the reverse feeding (RF) time regimen up to 8 weeks, then measured the general and reproductive indices of the animals. The animals of ad libitum feeding group (Control, CON) have free access to food for 4, 6 and 8 weeks, respectively. The day feeding animals (reverse feeding, RF group) have restricted access to food during daytime (09:00-18:00) for 4, 6 and 8 weeks, respectively. When the feeding schedules were over, key indices were measured. After 4 weeks and 8 weeks of feeding, body weights of animals were not significantly different. However, body weights of 6 weeks RF animals were significantly smaller than those of control animals (CON : RF = $333.46{\pm}12.71$ g : $289.91{\pm}8.31$ g, p<0.01). The blood glucose levels of 4 weeks RF animals were significantly decreased compared to the levels of control animals (CON : RF = $161.4{\pm}2.7$ mg/dL : $176.7{\pm}5$ mg/dL, p<0.01) while the levels of 6 weeks RF and 8 weeks RF animals were not different form those of control animals. Reproductive and non-reproductive tissue weights from 6 weeks RF group were significantly lowered than those from CON group (testis, CON : RF = $1.4714{\pm}0.0174$ g : $1.3724{\pm}0.0168$ g, p<0.001; epididymis, CON : RF = $0.3574{\pm}0.0059$ g : $0.3243{\pm}0.0068$ g, p<0.001; seminal vesicle, CON : RF = $0.1655{\pm}0.0068$ g : $0.1328{\pm}0.0054$ g, p<0.001; prostate, CON : RF = $0.3350{\pm}0.0231$ g : $0.2528{\pm}0.0143$ g, p<0.01). After 4 weeks and 8 weeks of reverse feeding, sperm counts in RF animals were markedly reduced than those in control animals[CON 4W : RF 4W = $121.17{\pm}9.96\;({\times}10^6)$ : $50.86{\pm}9\;({\times}10^6)$, p<0.001; CON 8W : RF 8W= $138.69{\pm}9.8\;({\times}10^6)$ : $108.94{\pm}4.22\;({\times}10^6)$, p<0.001]. Present study indicates that RF may induce an adaptable metabolic stress and cause impairment of androgen-dependent reproductive tissues. On-going longitudinal studies will allow a better understanding of the how does mealtime shift affect the reproductive function and exact nature of adaptation.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.164-183
• /
• 2019

The purpose of this study is to develop a STEAM program based on reverse engineering. To achieve the purpose of this study, STEAM program was developed on the subject of autonomous vehicle. The results of this study are summarized as follows. The program was developed based on STEAM program development model based on reverse engineering. Developed in a five step procedure (analysis, design, development, implementation, evaluation) with the subject of autonomous vehicle. First, in the analysis step, we explored the definition, goal, content area, and teaching and learning methods of STEAM based on reverse engineering. We extracted the goals and content areas to be included in the educational program. Second, in the design step, topics were selected through consultation with experts. At this time, based on the linkage between the 2015 revised curriculum and the STEAM curriculum, we selected and organized educational goals and learning contents. Third, in the development step, we developed a teacher 's guidebook and student' s textbook, and applied the program to 71 students in the second grade of OO middle school in Seoul. Fifth, at the evaluation stage, the evaluation was made by experts and students based on the program that was implemented, and revised and supplemented based on the results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.931-936
• /
• 2008

Surveying by using terrestrial LiDAR(Light Detection And Ranging) is more rapid than by using total station which enables tunnel section profile surveying to be done in suitable time and minimize centerline error, occurrence of overcut and undercut. Therefore, utilization of terrestrial LiDAR has increased more and more in section profile survey and measurement field Moreover, studies of terrestrial LiDAR for accurate and efficient utilization is now ongoing vigorously. Average end area formula, which was generally used to calculate overcut and undercut, was compared with existing methods such as total station survey and photogrammetry. However, there are no criteria of spacing distance for calculating overcut and undercut through terrestrial LiDAR surveying which can acquire 3D information of whole tunnel. This research performed reverse engineering to decide optimal spacing distance when surveying tunnel section profile by comparing whole tunnel volume and tunnel volume in difference spacing distance. This result was utilized to produce CAD drawing for the test tunnel site where there is no design drawings. In addition to this, efficiency of LiDAR and accuracy of CAD drawing was compared with targetless total station surveying of tunnel section profile. Finally, error analysis of target coordinate's accuracy and incidence angle was done in order to verify the accuracy of terrestrial LiDAR technology.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.4
• /
• pp.312-318
• /
• 2015

The aim of this study was to investigate the possibility of the supernumerary teeth for the stem cell source in dentistry. The Real Time Quantitative Reverse Transcription Polymerase Chain Reaction (Real Time qRT-PCR) method was used to evaluate the differentiation toward the odontoblast of the supernumerary dental pulp stem cells (sDPSCs). Supernumerary dental pulp stem cells were obtained from 3 children (2 males and 1 female, age 7 to 9) diagnosed that the eruption of permanent teeth was disturbed by supernumerary teeth. The common genes for odontoblasts are alkaline phosphatase (ALP), osteocalcin (OC), osteonectin (ON), dentin matrix acidic phosphoprotein 1 (DMP-1), dentin sialophosphoprotein (DSPP). The sDPSCs were treated for 0 days, 8 days and 14 days with additives and then Real Time qRT-PCR was performed in intervals of 0 days, 8 days and 14 days. The alizarin-red solution staining was performed to visualize the stained color for the degree of calcification at 7 days, 14 days, 21 days and 28 days after treating additives to the sDPSCs. From the result of the Real Time qRT-PCR, the manifestation exhibit maximum value at 8 days after additive treatment and shifted to a decrease trend at 14 days. Alizarin-red solution staining exhibit light results at 7 days after staining and generalized dark result at 14 days. Consequently, in studies with sDPSCs, appropriate treatment time of additives for Real Time qRT-PCR is 8 days. Also, a suitable period of Alizarin-red solution staining is 14 days.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.460-462
• /
• 2004

The control of the data retention time is a main issue for realizing future high density dynamic random access memory. There are several leakage current mechanisms in which the stored data disappears. The mechanisms of data disappear is as follow, 1 )Junction leakage current between the junction, 2) Junction leakage current from the capacitor node contact, 3)Sub-threshold leakage current if the transfer transistor is affected by gate etch damage etc. In this paper we showed the plasma edge damage effect to find out data retention time effectiveness. First we measured the transistor characteristics of forward and reverse bias. And junction leakage characteristics are measured with/without plasma damage by HP4145. Finally, we showed the comparison TRET with etch damage, damage_cure_RTP and hydrogen_treatment. As a result, hydrogen_treatment is superior than any other method in a curing plasma etch damage side.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.4
• /
• pp.213-222
• /
• 1993

This research was performed to investigate the transformation behavior and shape memory effect of Cu-13.5Al-4.5Ni(wt%) alloy with various aging temperature and time. The results obtained in this study are as follows: Transformation temperature was very increased when aging temperature is at $250^{\circ}C$. The variation of transformation temperature in first reverse transformation cycle and second was very significant, but there was little difference in case of 2nd and 3rd. Transformation temperature at various aging temperature was increased with increasing of aging temperature and time. Microvickers hardness was increased with increasing of aging temperature and time. It was found that ${\alpha}$ and ${\gamma}_2$ phase were created by aging of long time at high temperature.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.705-708
• /
• 1988

Ultrasound Doppler Diagnostic System utilizes the Doppler effect for measurement of blood velocity. The sign of the Doppler frequency shift represents blood flow direction. Pulsed Doppler System uses Phase detector and zerocrossing method to produce simultaneous independent audio and velocity signals for forward and reverse blood flow direction in the time domain, had been fabricated. But time-domain analyzing such as audio evaluation and zerocrossing detection for instantaneous and mean frequency measurement doesn't, provide both an accurate and quantitative result. Therefore, it is necessary to adopt frequency domain technique to improve system performance. In this paper, we describe a unit which is composed of Pulsed Doppler System and real-time spectrum analyzer (installed TMS 32010 DSP Chip). This unit shows time-dependent spectrum variation and mean velocity of blood Signal.