• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.1-9
• /
• 2000

In this paper, for the reverse link of a imperfect power controlled DS/CDMA cellular system when a mobile radio channel is a Rayleigh distributed multipath fading channel, A extended DS/CDMA blocking probability formula considering both shadowing and multipath fading is derived. Erlang capacity and equivalent channel number considering shadowing are analyzed and compared with those considering both shadowing and multipath fading, respectively. The DS/CDMA blocking probability is calculated based on the analysis method that obtains Erlang capacity and ICF(interference correction factor) using the median value of $E_{b(i)}$/ $I_{0}$ corresponding to each reverse link user Assuming that the blocking probability set 2%, it is observed that the Erlang capacity is 19.97 Erlang at the data rate $R_{b}$=9.6 kbps and 11.67 Erlang at the data rate $R_{b}$=14.4 kbps and then is less 16% and 19% than the Erlang capacity considering shadowing only, respectively. It is also shown that the effect of multipath fading must not be ignored and then exact Erlang capacity and equivalent channel numbers that the DS/CDMA cellular system can support are provided.d.d.d.

• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.167-171
• /
• 2015

A radio over fiber (RoF) system is a kind of analog optical transmission system and considered as a strong candidate for the next-generation fronthaul link in the future mobile network. In RoF systems, nonlinearity compensation is essential to increase the link capacity. In this paper, we propose a nonlinearity detection and compensation scheme using a monitoring channel in RoF systems. A monitoring channel is added at the transmitter site and used for transmitting a reference signal in an RoF transmission. The nonlinearity in the RoF transmission is detected by comparing the received monitoring signal and the original reference signal at the receiver site. Finally, the nonlinearity is compensated at the receiver by giving the reverse function of the detected nonlinearity. Our results show that the proposed scheme can almost remove the error vector magnitude degradation induced by the nonlinearity in the RoF system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1179-1186
• /
• 1999

Multi-carrier CDMA technique is more attractive in wireless communication system. It can support the effect of frequency diversity with higher spectral efficiency. In this paper, pilot symbol structure was proposed to estimate chann디 paramenters for MC-CDMA system and we analyzed the perfoemance of proposed MC-CDMA which compensates the received signals using the pilot symbols for link transmission. At first, we proposed the new method of pilot's usage for reverse link transmission that can distinguish accessing users whose signals undergo diggerent channels. And we analyzed the performance of coherent MC-CDMA reception using estimated channel parameters

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.421-428
• /
• 2009

Inter-cell coordination has been an emerging issue for mitigating inter-cell interference in broadband wireless access networks such as IEEE802.16 and 3GPP LTE (Long Term Evolution). This paper proposes uplink/downlink hybrid inter-cell coordination patterns for a TDD (Time Division Duplex)/MC-CDMA (Multi-Carrier Code Division Multiple Access) system. For the performance analysis, closed forms of inter-cell interferences are derived when uplink and downlink transmissions coexist over a multi-cell environment. In the analysis, we find an optimal ratio of downlink transmit powers of BSs (Base Stations) based on the target outage probability and the performance according to ratios of uplink/downlink transmit powers of MSs (Mobile Stations)/BSs is explored. Our numerical results show that interference mitigation utilizing the characteristics of the uplink and downlink power ratio is very effective in improving system performance in terms of QoS.

• The Journal of Information Technology
• /
• v.3 no.2
• /
• pp.87-95
• /
• 2000

This paper studies on method about construction and design of two-way message system to overcome limit of one-way pager system. Method of two-way system construction is studied on using the present one-way pager system and configure system. Forward-link of proposed method is using the present one-way pager system. And Reverse-link of proposed method is used TRS and Beacon on pager. CTI(Computer Telephony Integration) is used to Call processing

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.1-8
• /
• 1997

In this paper, we propose a call admission control scheme which can be used in real environment for the traffic cibtrik if a base station if DS-CDNA cellular systems. The proposed scheme estimates the mean and variance of other cell interference by using the values used for the closed loop power control. The reerse link capacity of the base station can be calculated by using the estimated mean and variance of other cell interference. The base station admits a call only if the number of users is less than the calculated reverse link capacity. In addition, we propose a simple method to obtain the equivalent number of voice call users per one data call user in multi-rate traffic environment. The method can be applied to call admission control in multi-rate traffic environment.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.212-219
• /
• 2002

In this paper, how to perform beamforming and power control for the systems with smart antennas is introduced in consideration of macro-diversity, and cell capacity of the systems is analyzed. In the result, as the number of the base stations linked to mobiles increases, capacity increases in the reverse link. On the other hand, macro diversity causes capacity loss in forward link. It is expected that the result of this work may be used in designing the next generation mobile communication systems for high quality services such as multi media data and wireless internet etc.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1050-1052
• /
• 2000

An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system (3-5kW) that interface with a 220V single phase utility connection. As the result of this investigation. a 3kW high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors, a net size, weight, and parts cost saving result compared to the other systems due to elimination of 60Hz transformer.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.46-49
• /
• 2001

An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system(3-5kVA) that interface with a 220V single phase utility connection. As the result of this investigation, a 3kVA high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier. four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors, a net size, weight, and parts cost saving result compared to the other systems due to elimination of 60Hz transformer.